Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Security

128-NIA1

128-bit NR Integrity Algorithm 1

Security →

128-NIA1 is a standardized cryptographic integrity algorithm for 5G NR user plane and control plane data protection, ensuring data authenticity and preventing tampering during transmission between the UE and the gNB.

Introduced
Rel-15
Where
Security
Specifications
1 specs
128-NIA1 Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

128-NIA1 is a cryptographic integrity protection algorithm defined by 3GPP for the 5G system. It is part of the 5G security algorithm suite, specifically designed for the New Radio (NR) air interface. The algorithm is based on the SNOW 3G stream cipher, operating in a specific mode to generate a Message Authentication Code (MAC), often called an integrity token or MAC-I/NAS-MAC. It is applied to both user plane data and control plane signaling messages to guarantee that the data received has not been altered in transit.

The algorithm works by taking several inputs: the integrity key (IK), a time-dependent input called the COUNT (a counter), a bearer identity (BEARER), the direction of transmission (uplink or downlink), and the actual message data itself. These inputs are processed by the SNOW 3G cipher core to produce a keystream block, which is then used in conjunction with the message to compute a 32-bit integrity tag. This tag is appended to the message before transmission. The receiving entity (UE or gNB) independently computes the tag on the received message using the same inputs and compares it to the received tag. A mismatch indicates a potential integrity violation, and the message is discarded.

Its primary role is within the PDCP (Packet Data Convergence Protocol) layer in the radio protocol stack. For control plane signaling, specifically NAS (Non-Access Stratum) messages, a derived key and a similar mechanism are used to provide end-to-end integrity protection between the UE and the core network's AMF. 128-NIA1 is one of the mandatory-to-support algorithms for NR integrity protection, ensuring a baseline level of security interoperability across all 5G deployments. The selection of this specific algorithm from the available suite is negotiated during the security mode command procedure between the network and the UE.

Purpose & Motivation

128-NIA1 was created as part of the new 5G security architecture introduced in 3GPP Release 15. 5G aimed to address security shortcomings and enhance protections compared to previous generations like 4G EPS. A key motivation was to provide fresh cryptographic algorithms that were rigorously evaluated and standardized, moving away from reliance on algorithms originally designed for 3G (like the 128-EIA series, which also uses SNOW 3G). While 128-EIA2 served 4G EPS well, 5G's new service requirements, including network slicing and massive IoT, demanded a clear and distinct security algorithm suite for the NR interface.

The creation of 128-NIA1 solved the problem of ensuring strong, standardized integrity protection for the new 5G radio interface from its inception. It provides protection against attacks such as message injection, replay, and modification. By being mandatory for all 5G devices and networks to support, it guarantees a fundamental level of security and enables seamless interoperability on a global scale, forming a trusted foundation upon which more advanced 5G security features could be built.

What changed in its specifications

The latest release-to-release comparison of specifications that define 128-NIA1. Each summary describes the whole specification, not only this term.

TS 33.501Rel-18 → Rel-19

Rel-19 TS 33.501 adds roaming and inter-PLMN indirect communication authorization, fast re-authentication for non-3GPP mobility, and AI/ML security clauses for positioning and federated learning. It also adds NPN security, NRF access token key retrieval, LTM security, and monitoring-of-signalling-traffic protection.

Full comparison in TS 33.501 →

Technology family

Ciphering and integrity algorithms · Security

  1. Phase 1 A5/1, A5/2, A8
  2. R97 GEA
  3. R98 B1, B2
  4. R99 A5/3, GEA3, KASUMI, UEA1, UIA1
  5. Rel-7 SNOW 3G, UEA2, UIA2
  6. Rel-8 128-EEA1, 128-EEA2, 128-EIA1, 128-EIA2, EEA0, EIA0
  7. Rel-9 A5/4, GEA4
  8. Rel-11 128-EEA3, 128-EIA3, ZUC
  9. Rel-13 GEA5, GIA4, GIA5
  10. Rel-15 128-NEA1, 128-NEA2, 128-NEA3, 128-NIA1, 128-NIA2, 128-NIA3, NEA0, NIA0
  • 128-NIA1 reuses 128-EIA1
    “128-NIA1 is based on SNOW 3G (see TS 35.215 [14]).” TS 33.501

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 1 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-15 introduced

128-NIA1 is specified for the first time in TS 33.501 as a SNOW 3G based 128-bit NR integrity algorithm, identical to 128-EIA1, for NAS, RRC and UP integrity protection.

  • “128-NIA1 is based on SNOW 3G (see TS 35.215 [14]).” TS 33.501 v15.20.0
  • “"00012" 128-NIA1 128-bit SNOW 3G based algorithm;” TS 33.501 v15.20.0
  • “128-NIA1 and 128-NIA2 for NAS signalling integrity protection, RRC signalling integrity protection and UP integrity protection.” TS 33.501 v15.20.0

Defining Specifications

3GPP specifications that define or reference 128-NIA1, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 33.501 vk30 5G Security Architecture Rel-20 read