Overview
The document defines a common architecture framework for remote provisioning and subscription management of embedded UICCs in devices that are not easily reachable. It describes the eUICC ecosystem, profile attributes, system roles, procedures, policy control, interfaces and security requirements. It also covers local profile switching for testing, certification or emergency cases. The framework aims to support global interoperability between operators while maintaining security for operators and subscribers.
- eUICC
- Remote SIM Provisioning
- M2M
- SM-DP
- SM-SR
- Profiles
Overview generated automatically from the document's scope and outline. The document text is authoritative.
Changes since v4.0
43 clauses modified, 28 clauses added
Compared automatically clause by clause from the extracted text of both versions; differences only in layout, spacing or table cells are ignored. The documents are authoritative.
1.5 Definition of Termsmodified
…re changing of Subscriptions. Term Description An Operational Profile with a Profile Attribute allocated, indicating that this Profile is an Emergency Profile. … Emergency Profile An Emergency Profile complies with regulatory Emergency Profile requirements and only provides the capability to make Emergency Calls and receive calls from an Emergency centre (e.g. Public Safety Answering Point) This is an … tion A function of the interface between a Device and an eUICC that provides the capability for a Device to locally Local Disable disable the Emergency Profile … or the Test Profile on the eUICC without involvement of an SM-SR and/or SM-DP. A function of the interface between a Device and an eUICC that provides the capability for a Device to locally Local Enable enable the Emergency Profile or the Test Profile on the eUICC without involvement of an SM-SR and/or SM-DP. A Service Provider relying on an Operator providing the M2M Service Provider (M2M SP) Profil… …
1.7 Referencesmodified
…TS 102 226 Remote APDU structure for UICC based applications Smart cards; Machine to Machine UICC; Physical and [8] ETSI TS 102 671 logical characteristics [9] … ETSIVoid TSVoid 103 383 Embedded UICC; Requirements Specification [10] GlobalPlatform Card Specification v.2.2.1 GlobalPlatform Card Specification v.2.2.1 UICC [11] Configuration v1.0.1 GlobalPlatform Card Specification v.2.2 … 1: General (Revision 3) Key words for use in RFCs to Indicate Requirement [21] RFC 2119 Levels, S. Bradner http://www.ietf.org/rfc/rfc2119.txt FS.08 – Security … AccreditaionAccreditation Scheme for Subscription [22] FS.08 Manager - Standard v3 FS.04 - Security Accreditation Scheme for UICC [23] FS.04 Production – Standard v8 [24] ITU-T E.118 The international telecommunication charge card [24] ITU-T E.118 Digital cellular telecommunications system (Phase 2+); [25] 3GPP TS 23.003 Universal Mobile Telecommunications System (UMTS); Numbering, addressing and identif… …
2.3.1.7 Subscription Manager – Secure Routing (SM-SR)modified
…als in clear text. 2. The SM-SR has secure communications channels to the SM-DP, eUICC, Operator and M2M SP. 3. The SM-SR SHALL be GSMA SAS-SM [22]- certified. … SMSR7 The SM-SR SHALL be able to determine whether an eUICC is available for remote SMSR7 management. SMSR8 The SM-SR SHALL be non-discriminatory with regards to other entities within the ecosystem. SMSR9 The SM-SR certificate SHALL be issued by a G… …
2.3.1.9 Initiatormodified
… between the Initiator and the SM-SR is based on the interfaces defined in this document. INT5 The Initiator SHALL be authorised and authenticated by the SM-SR. … 2.3.1.10M2M Service Provider An M2M SP MAY have a direct interface to the SM-SR to perform Profile M2MSP1 Lifecycle Management for which PLMAs have been set by the Operator. An M2M SP SHALL be able to request to an SM-SR the enabling of a Profile M2MSP2 for which PLMAs have been set by the Operator. An M2M SP SHALL be able to request to an SM-SR the disabling of a Profile M2MSP3 for which PLMAs have been set by the Operator. An M2M SP SHALL be able to request to an SM-SR the deletion of a Profile M2MSP4 for which PLMAs have been set by the Operator. An M2M SP SHALL be able to request to an SM-SR the setting of the Fall- M2MSP4-B Back Attribute on a Profile, if and only if the appropriate PLMA has been set by both the Operator whose Profile has the Fall-Back Attribute currently set, and the Operator whose Profile will have the Fall-Back Attribute set by the request. A M2M SP SHALL be able to request to an SM-SR the setting of the M2MSP4-C Emergency Profile Attribute on a Profile, if and only if the appropriate PLMA has been set by the Operator whose Profile will have the Emergency Profile Attribute set by the request. In case a Profile exists that already has the Emergency Profile Attribute set, an M2M SP SHALL be able to request to an SM-SR the setting of the Emergency Profile Attribute on a Profile, if and only if the appropriate PLMAs have been set by both, the Operator whose Profile has the Emergency Profile Attribute currently set, and the Operator whose Profile will have the Emergency Profile Attribute set by the request. M2MSP5 The M2M SP SHALL be able to receive reports of a Profile enabling, disabling, or deletion and Fall-Back or Emergency Profile Attribute change, based on a Platform Management command executed by an SM-SR, irrespective of the cause of the changes to the Profile. M2MSP6 The M2M SP SHALL be able to receive reports whenever its PLMAs have been changed. M2MSP7 The reception of reports in M2MSP5 SHALL be configured via PLMAs.
2.3.1.10 M2M Service Provideradded
An M2M SP MAY have a direct interface to the SM-SR to perform Profile M2MSP1 Lifecycle Management for which PLMAs have been set by the Operator. An M2M SP SHALL be able to request to an SM-SR the enabling of a Profile M2MSP2 for which PLMAs have been set by the Operator. An M2M SP SHALL be able to request to an SM-SR the disabling of a Profile M2MSP3 for which PLMAs have been set by the Operator. An M2M SP SHALL be able to request to an SM-SR the deletion of a Profile M2MSP4 for which PLMAs have been set by the Operator. An M2M SP SHALL be able to request to an SM-SR the setting of the Fall- M2MSP4-B Back Attribute on a Profile, if and only if the appropriate PLMA has been set by both the Operator whose Profile has the Fall-Back Attribute currently set, and the Operator whose Profile will have the Fall-Back Attribute set by the request. A M2M SP SHALL be able to request to an SM-SR the setting of the M2MSP4-C Emergency Profile Attribute on a Profile, if and only if the appropriate PLMA has been set by the Operator whose Profile will have the Emergency Profile Attribute set by the request. In case a Profile exists that already has the Emergency Profile Attribute set, an M2M SP SHALL be able to request to an SM-SR the setting of the Emergency Profile Attribute on a Profile, if and only if the appropriate PLMAs have been set by both, the Operator whose Profile has the Emergency Profile Attribute currently set, and the Operator whose Profile will have the Emergency Profile Attribute set by the request. M2MSP5 The M2M SP SHALL be able to receive reports of a Profile enabling, disabling, or deletion and Fall-Back or Emergency Profile Attribute change, based on a Platform Management command executed by an SM-SR, irrespective of the cause of the changes to the Profile. M2MSP6 The M2M SP SHALL be able to receive reports whenever its PLMAs have been changed. M2MSP7 The reception of reports in M2MSP5 SHALL be configured via PLMAs.
2.4 The eUICCmodified
…le fails, the eUICC triggering the Fall-Back Mechanism SHALL ensure that the previously enabled Profile is the Profile that was enabled before the Local Enable. … The eUICC MAY support Java Card™. EUICC25 Note: eUICCs according to SGP.02 versions 2.1, 3.1, and 3.2 that are certified, support Java Card™.
3.2.2 Card Architecturemodified
This section describes how Profiles SHOULD be designed, for example, using an extended version of the concepts and information models from GlobalPlatform Card Specification [10].[ 10]. Profiles are contained within security domains (SD) on the eUICC, thus making the security mechanisms of SDs available. Further information can be found in [10] … ly to security domains of the Profile and only when the Profile is in Enabled state. The MNO-SD is the on-card representative of the Operator. An MNO-SD SHALL: … a)j) Be associated to itself; b)k) Contain the Operator OTA Keys; c)l) Provide a secure OTA channel (SCP80 or SCP81 as defined in [6] and [7]); d)m) Have the capability to host Supplementary Security Domains. Once the Profile is installed in its ISD-P on the eUICC, the Profile and ISD-P SHALL be considered … …
3.3.1.1 Functions for Data Preparationmodified
Un-personalised Profile Creation Un-personalised Profile Creation covers the building of the Un-personalised Profile based on the Operator’s Profile Description and the type of eUICC targeted. The SM-DP generates the Un-personalised Profile using the documentation provided by the Operator. It is assumed the SM-DP tests the Un-personalised Profile with a sample of the target eUICC. The Operator validates the Un-personalised Profile by testing a sample of the target eUICC personalised with a test Personalised Profile created from the Un-personalised Profile developed by the SM-DP. The downloadable Profile SHALL be provided in a standardised format. Profile Ordering Profile ordering covers the processes for the preparation and generation of the Personalised Profiles by the SM-DP based on the input data provided by the Operator to the SM-DP. The input data includes (but is not limited to): The quantity of the Profiles to be generated; IMSI value(s) or range; ICCID value(s) or range; Un-personalised Profile type(s); Information about the target eUICC(s), such as the EID. How and when the input data is provided by the Operator to the SM-DP is out of scope. Generation of Personalisation Data This function creates the credential and key values (e.g. NAC, PINs, OTA Keys) in a secure environment based on the input data provided by the Operator (e.g. IMSI, ICCID). Profile Personalisation SM-DP inserts the Personalisation Data into the Un-personalised Profile with respect to the order placed by the Operator. This function addresses the procedures which ensure a created Personalised Profile can only be installed on a specific eUICC. EUM Services, Scripts, Tools or Documentation To allow any SM-DP to undertake the above functions on any eUICC or the documentation supplied by the EUM must support at least the following eUICC attributes which MAY be delivered by the Operator. Some attributes are related to the function of Un-personalised Profile Creation and some to Profile Personalisation and in some cases the function to which they apply MAY be dependent on the particular eUICC. The attributes are: Applications (and assignment of the applications) to be used or loaded, including USIM, ISIM, CAT and third party application SSDs; Algorithm selection, algorithm parameter assignment, and algorithm parameter loading within the eUICC platform; Application Key and PIN assignment and loading; Optional and variable data fields in the USIM application file structure; Additional data fields and file structures to support other applications – both SIM- based and device-based applications. The information exchanged between the SM-DP and EUM is not standardised and MAY differ between different entities.
3.3.1.1.1 Un-personalised Profile Creationadded
Un-personalised Profile Creation covers the building of the Un-personalised Profile based on the Operator’s Profile Description and the type of eUICC targeted. The SM-DP generates the Un-personalised Profile using the documentation provided by the Operator. It is assumed the SM-DP tests the Un-personalised Profile with a sample of the target eUICC. The Operator validates the Un-personalised Profile by testing a sample of the target eUICC personalised with a test Personalised Profile created from the Un -personalised Profile developed by the SM-DP. The downloadable Profile SHALL be provided in a standardised format.
3.3.1.1.2 Profile Orderingadded
Profile ordering covers the processes for the preparation and generation of the Personalised Profiles by the SM-DP based on the input data provided by the Operator to the SM-DP. The input data includes (but is not limited to): The quantity of the Profiles to be generated; IMSI value(s) or range; ICCID value(s) or range; Un-personalised Profile type(s); Information about the target eUICC(s), such as the EID. How and when the input data is provided by the Operator to the SM-DP is out of scope.
3.3.1.1.3 Generation of Personalisation Dataadded
This function creates the credential and key values (e.g. NAC, PINs, OTA Keys) in a secure environment based on the input data provided by the Operator (e.g. IMSI, ICCID).
3.3.1.1.4 Profile Personalisationadded
SM-DP inserts the Personalisation Data into the Un-personalised Profile with respect to the order placed by the Operator. This function addresses the procedures which ensure a created Personalised Profile can only be installed on a specific eUICC.
3.3.1.1.5 EUM Services, Scripts, Tools or Documentationadded
To allow any SM-DP to undertake the above functions on any eUICC or the documentation supplied by the EUM must support at least the following eUICC attributes which MAY be delivered by the Operator. Some attributes are related to the function of Un-personalised Profile Creation and some to Profile Personalisation and in some cases the function to which they apply MAY be dependent on the particular eUICC. The attributes are: Applications (and assignment of the applications) to be used or loaded, including USIM, ISIM, CAT and third party application SSDs; Algorithm selection, algorithm parameter assignment, and algorithm parameter loading within the eUICC platform; Application Key and PIN assignment and loading; Optional and variable data fields in the USIM application file structure; Additional data fields and file structures to support other applications – both SIM- based and device-based applications. The information exchanged between the SM-DP and EUM is not standardised and MAY differ between different entities.
3.3.1.2 Functions for Profile Managementmodified
eUICC Eligibility Verification Function The eUICC Eligibility Verification function covers the following aspects: Verification of the targeted eUICC for installing the Profile in preparation. Verification of the eUICC certification. Profile Download and Installation Function This function allows the download and installation of a Personalised Profile into the targeted eUICC. Profile Content Update Function This is handled by an Operator OTA Platform. Policy Rules Update Function This function updates the Policy Rules. The Policy Rules to be updated MAY be the ones in the SM-SR, or the ones within a Profile already installed in the ISD-P on the eUICC. Profile Lifecycle Management Authorisation Function This covers the setting, unsetting and status enquiry of the PLMA in the SM-SR, initiated by the Operator.
3.3.1.2.1 eUICC Eligibility Verification Functionadded
The eUICC Eligibility Verification function covers the following aspects: Verification of the targeted eUICC for installing the Profile in preparation. Verification of the eUICC certification.
3.3.1.2.2 Profile Download and Installation Functionadded
This function allows the download and installation of a Personalised Profile into the targeted eUICC.
3.3.1.2.3 Profile Content Update Functionadded
This is handled by an Operator OTA Platform.
3.3.1.2.4 Policy Rules Update Functionadded
This function updates the Policy Rules. The Policy Rules to be updated MAY be the ones in the SM-SR, or the ones within a Profile already installed in the ISD-P on the eUICC.
3.3.1.2.5 Profile Lifecycle Management Authorisation Functionadded
This covers the setting, unsetting and status enquiry of the PLMA in the SM-SR, initiated by the Operator.
3.3.1.3 Functions for Platform Managementmodified
ISD-P Creation Function This function creates an ISD-P within the eUICC in preparation for Profile content to be loaded. ISD-P Deletion Function This function allows the deletion of an ISD-P. ISD-P deletion is the permanent removal of an ISD-P along with its content previously loaded and installed on the eUICC. An ISD-P can be deleted only when it is in disabled state (see state diagram in section 3.2.3). Master Delete Function The Master Delete Function allows the deletion of an Orphaned Profile without the Fall-Back Attribute set regardless of the Profile’s policy rules. This function will delete the Profile and its ISD-P. The deletion of a Profile can only happen when the Profile is in disabled state and its Fall-Back Attribute is not set. Profile Enabling Function This function is used to Enable a Profile in Disable state. This will make the applications and files within the Profile visible to and selectable by the M2M Device subject to relevant access control. Profile Disabling Function This function is used to Disable a Profile in Enable state. This will make all applications and files within the Profile invisible to and not selectable by the Device. Set Fall-Back Attribute This function sets the Fall-Back Attribute of a Profile on the eUICC Transport Function Transport function refers to the establishing of the communication channel between the SM- SR and the ISD-R on the eUICC. Security of transport channel between the SM-SR and eUICC is also addressed by this function. NOTE: The eUICC within a Device MAY be contacted over different type of network systems (such as GSM, GPRS, UMTS, or EPS) by the SM-SR. Furthermore, the SM-SR will need to interface with the concerned network system accordingly. For instance the SM-SR would need to use SMPP to be able to communicate with SMS, or it MAY need to connect to an IMS gateway in order to establish an IP-based communication with the eUICC. These communications are being provided by the active Subscription. Policy Enforcement Function This deals with the enforcement of the policy rules on the eUICC and at the SM-SR.
3.3.1.3.1 ISD-P Creation Functionadded
This function creates an ISD-P within the eUICC in preparation for Profile content to be loaded.
3.3.1.3.2 ISD-P Deletion Functionadded
This function allows the deletion of an ISD-P. ISD-P deletion is the permanent removal of an ISD-P along with its content previously loaded and installed on the eUICC. An ISD-P can be deleted only when it is in disabled state (see state diagram in section 3.2.3).
3.3.1.3.3 Master Delete Functionadded
The Master Delete Function allows the deletion of an Orphaned Profile without the Fall-Back Attribute set regardless of the Profile’s policy rules. This function will delete the Profile and its ISD-P. The deletion of a Profile can only happen when the Profile is in disabled state and its Fall-Back Attribute is not set.
3.3.1.3.4 Profile Enabling Functionadded
This function is used to Enable a Profile in Disable state. This will make the applications and files within the Profile visible to and selectable by the M2M Device subject to relevant access control.
3.3.1.3.5 Profile Disabling Functionadded
This function is used to Disable a Profile in Enable state. This will make all applications and files within the Profile invisible to and not selectable by the Device.
3.3.1.3.6 Set Fall-Back Attributeadded
This function sets the Fall-Back Attribute of a Profile on the eUICC
3.3.1.3.7 Transport Functionadded
Transport function refers to the establishing of the communication channel between the SM- SR and the ISD-R on the eUICC. Security of transport channel between the SM-SR and eUICC is also addressed by this function. NOTE: The eUICC within a Device MAY be contacted over different type of network systems (such as GSM, GPRS, UMTS, or EPS) by the SM-SR. Furthermore, the SM-SR will need to interface with the concerned network system accordingly. For instance the SM-SR would need to use SMPP to be able to communicate with SMS, or it MAY need to connect to an IMS gateway in order to establish an IP-based communication with the eUICC. These communications are being provided by the active Subscription.
3.3.1.3.8 Policy Enforcement Functionadded
This deals with the enforcement of the policy rules on the eUICC and at the SM-SR.
3.3.1.4 Functions for eUICC Managementmodified
eUICC Registration Function This function is called to register an eUICC in an SM-SR. SM-SR Change Function This function is called to initiate the change the change of an SM-SR for an eUICC. SM-SR change is the transfer of the EIS for an eUICC from one SM-SR to another SM-SR and the establishment of new key set, in the ISD-R, between the new SM-SR and the eUICC.
3.3.1.4.1 eUICC Registration Functionadded
This function is called to register an eUICC in an SM-SR.
3.3.1.4.2 SM-SR Change Functionadded
This function is called to initiate the change the change of an SM-SR for an eUICC. SM-SR change is the transfer of the EIS for an eUICC from one SM-SR to another SM-SR and the establishment of new key set, in the ISD-R, between the new SM-SR and the eUICC.
3.3.1.5 eUICC Functionsmodified
Fall-Back Function This function activates the Fall-Back Mechanism that disables the currently Enabled Profile and enables the Profile with Fall-Back Attribute set. For example, in the case of permanent loss of network connectivity for the Enabled Profile.
3.3.1.5.1 Fall-Back Functionadded
This function activates the Fall-Back Mechanism that disables the currently Enabled Profile and enables the Profile with Fall-Back Attribute set. For example, in the case of permanent loss of network connectivity for the Enabled Profile.
3.3.1.6 Device Functionsmodified
Local Enable of the Emergency Profile This function enables the Device to enable the Emergency Profile. Local Disable of the Emergency Profile This function enables the Device to disable the Emergency Profile. Local Enable of the Test Profile This function enables the Device to enable the Test Profile. Local Disable of the Emergency Profile This function enables the Device to disable the Test Profile.
3.3.1.6.1 Local Enable of the Emergency Profileadded
This function enables the Device to enable the Emergency Profile.
3.3.1.6.2 Local Disable of the Emergency Profileadded
This function enables the Device to disable the Emergency Profile.
3.3.1.6.3 Local Enable of the Test Profileadded
This function enables the Device to enable the Test Profile.
3.3.1.6.4 Local Disable of the Emergency Profileadded
This function enables the Device to disable the Test Profile.
3.5.1 eUICC Registration at SM-SRmodified
…Profile 1: Profile Type, ISD-P AID, ICCID, MSISDN, State, DPID, Allocated Memory, POL2 … Profile n: … } } The eUICC registration comprises the following steps: … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox participant "EUM" as EUM #FFFFFF participant "SM-SR" as SR #FFFFFF EUM -> SR: [1] eUICC registration request (EIS) rnote over SR #FFFFFF [2] EIS registration in database end rnote SR -> EUM: [3] eUICC registration confirmation @enduml Figure 4: eUICC Registration at SM-SR Start Condition: eUICCs are produced and a Provisioning Profile is loaded and active in the Provisioning operator’s networ… …
3.5.3 Profile Ordering (Proprietary)modified
…le ordering processes and interfaces are not standardised and MAY differ between Operators. For example, the Profile ordering MAY comprise the following steps: … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox participant "Operator" as OP #FFFFFF participant "SM-DP" as DP #FFFFFF OP -> DP: [1] Profile Order (Profile specification, quantity, IMSIs) rnote over DP #FFFFFF [2] Profile personalisation: Generation of individual keys and credentials and insertion into Generic Profiles end rnote DP -> OP: [3] Order Completion Messages (IMSIs, Kis, ICCIDs, …) rnote over OP #FFFFFF [4] Installation at HLR/AuC end rnote @enduml Figure 5: Profile Ordering Start Conditions: a. An Un-personalised Profile has been created by the SM-DP based on the Profile Description provided by the Operator. b. The Operator has a demand for a quantity of eUICC Profiles. c. The Un-personalised Profile has been validated on the target eUICC type using thet he Un-personalised Profile verification procedure in section 3.5.2 Procedure: 1. The Operator provides an order to a selected SM-DP. The order contains production… …
3.5.4 Profile Download and Installationmodified
In order for the Device to be used for communication services, the eUICC must be loaded with at least one Operational Profile. In general, this will be done over-the-air,over -the-air, using the Subscription represented by the currently Enabled Profile. If no other OperationalOper ational Profile is enabled the Provisioning Profile is used. The Profile download and installation procedure follows the following steps: @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox participant “Operator” as OP #FFFFFF participant “SM-DP” as DP #FFFFFF participant “SM-SR” as SR #FFFFFF box “eUICC” #FFFFFF participant “ISD-R” as ISDR #FFFFFF participant “ISD-P” as ISDP #FFFFFF endbox OP->DP: [1] Profile Download Request\n(SRID, EID, ICCID, {Enable Request}) Rnote over DP #FFFFF [2] SM-SR Identification Endrnote DP<->SR: [3] Mutual Authentication DP->SR: [4] EIS Request (EID) Rnote over SR #FFFFFF [5] EIS Retrieval Endrnote SR->DP: [6] EIS Response DP-->OP: [8] EIS Conflict:\nConflict Report DP->SR: [9] ISD-P Installation Request SR<->ISDR: [10] Mutual Authentication Hnote over DP, ISDR #FFFFFF [11.a] ISD-P Creation Endhnote SR->DP: [11.b] ISD-P Creation Confirmation Hnote over SR, ISDP #FFFFFF [12] ISD-P Key Establishment Procedure Endhnote Rnote over DP #FFFFFF [13] Protection of Personalised Profile with ISD-P Keyset (EncP) endrnote DP->SR: [14] Secure Transport Channel \nRequest (EID) DP->SR: [15.a] Profile Download and Installation \n(EncP) Group Secure Transport Channel SR->ISDR: [15.b] Profile Download and\nInstallation (EncP) End ISDR->ISDP: [15.c] Profile Download and \nInstallation (EncP) Rnote over ISDP #FFFFFF Decryption and Installation Of Profile using ISD-P Key Endrnote ISDP->ISDR: [16.a] Profile Installation \nConfirmation Group Secure Transport Channel ISDR->SR: [16.b] Profile Installation Confirmation End SR->DP: [16.c] Profile Installation Confirmation DP->SR: [17] Profile Installation Result (EIS) Rnote over SR #FFFFFF [18] Insert new Profile Record in EIS Endrnote SR->DP: [19] Profile Download Confirmation Group Conditional DP->SR: [20] Profile Enabling via SM-DP End DP->OP: [21] Profile Download Confirmation\n @enduml Figure 6: Profile Download Start Conditions: a. A Subscriber has subscribed to a selected Operator. b. The EID of the target eUICC and the SRID are known by the … not provide information to the SM-DP that is not appropriate for the particular SM-DP. 7. The SM-DP checks the eligibility of the eUICC (e.g. type, certificate … andan d memory) based upon the received information from the EIS. 8. If a problem is detected with the eligibility of the eUICC, the SM-DP aborts the procedure and ret… …
3.5.5 Master Deletemodified
…le of the initiator needs to be determined. In the example below we can assume the initiator will be the new Operator with the authorisation of the Subscriber. … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox participant “Initiator\n<size:10>(new Operator)</size>” as INI #FFFFFF participant “SM-SR” as SR #FFFFFF participant “SM-DP” as DP #FFFFFF participant “Operator\n<size:10>(of target Profile)</size>” as OP #FFFFFF box “eUICC” #FFFFFF participant “ISD-R” as ISDR #FFFFFF participant “ISD-P” as ISDP #FFFFFF endbox INI->SR: [1] Master Delete Request\n(ICCID, Auth 1) SR->DP: [2] Authorisation Request\n(ICCID, Auth 1) hnote over DP, OP #FFFFFF [3] Authorisation (out of scope) end hnote DP->SR: [4.a] Authorisation Response\n(ICCID, Auth 2) SR-->INI: [4.b] Response (ICCID) SR<->ISDR: [5] Mutual Authentication SR->ISDR: [6] Master Delete Request (ICCID, Auth 2) ISDR->ISDP rnote over ISDP #FFFFFF [7] Verification endrnote ISDP-> ISDR rnote over ISDR #FFFFFF [8] Deletion endrnote ISDR->SR: [9] Response (ICCID) rnote over SR #FFFFFF [10] Update EIS endrnote SR->INI: [11] Response (ICCID) @enduml Figure 7: Master Delete Start Conditions: a. There is an Orphaned Profile on a eUICC which is, for example, blocking the loading of another Profile. b. The Orph… …
3.5.6 Profile Enablingmodified
A switch between two Profiles can be achieved by the following dedicated procedure. In this case the request is issued directly by the Operator to the SM-SR associated with the target eUICC. @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox participant “M2M SP” as SP #FFFFFF participant "Operator" as OP #FFFFFF participant "SM-SR" as SR #FFFFFF box “eUICC” #FFFFFF participant “ISD-R” as ISDR #FFFFFF endbox OP -> SR : [1] Profile Enabling Request (EID, ICCID) rnote over SR #FFFFFF [2] POL2 Check of currently enabled Profile endrnote SR --> OP : [3] POL2 Conflict Report SR<->ISDR: [4] Mutual Authentication SR -> ISDR : [5] Profile Enabling Request (ISD-P-AID) rnote over ISDR #FFFFFF [6] POL1 Check endrnote ISDR --> SR : [7] POL1 Conflict Report rnote over ISDR #FFFFFF [8] Currently Enabled Profile is Disabled Target Profile is Enabled endrnote ISDR -> SR : [9] Profile Switch Confirmation rnote over SR #FFFFFF [10] EIS Update: Target Profile is now Enabled Previous Profile is Disabled endrnote SR -> OP : [11] Profile Switch Result (EID, ICCID, …) Opt SR->SP: [12] Profile Switch Result (EID, ICCID, …) end @enduml Figure 8: Profile Enabling Start Conditions: a. The target Profile is disabled on the eUICC. Another Profile is enabled. b. The Subscription associated with the … their respective Profiles. 12. The SM-SR SHALL report the Profile switch result back to the M2M SP if requested by the Operator during PLMA registrations (see … 3.5.155)3.5.15). . These messages will include the EID and the ICCID of the targeted Profiles. End Condition: The target Profile is enabled on the eUICC. The previously EnabledEn abled Profile is disabled. The EIS is up to date.
3.5.7 Profile Enabling via SM -DPmodified was Profile Enabling via SM-DP
… to the SM- SR associated with the target eUICC. This way, the Operator does not have to be linked to the SM-SR and relies on the SM-DP to make the connection. … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox participant “M2M SP” as SP #FFFFFF Participant “Operator” as OP #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-R” as ISDR #FFFFFF Endbox OP->DP: [1] Profile Enabling Request\n(EID, ICCID) rnote over DP #FFFFFF [2] Identify SM-SR endrnote DP<->SR: [3] Mutual Authentication DP->SR: [4] Profile Enabling Request rnote over SR #FFFFFF [5] POL2 Check of currently Enabled Profile and Target Profile endrnote SR-->DP: [6] POL2 Conflict Report DP-->OP: [7] POL2 Conflict Report SR<->ISDR: [8] Mutual Authentication SR->ISDR: [9] Profile Enabling\nRequest (ISD-P-AID) rnote over ISDR #FFFFFF [10] POL1 Check endrnote ISDR-->SR: [11] POL1 Conflict Report rnote over ISDR #FFFFFF [12] Currently Enabled Profile is Disabled. Target Profile is Enabled endrnote ISDR->SR: [13] Profile Switch Result rnote over SR #FFFFFF [14] EIS Update: Target Profile is now Enabled. Previous Profile is Disabled endrnote SR->DP: [15] Profile Switch Result\n(EID, ICCID, …) DP->OP: [16] Profile Switch Result\n(EID, ICCID, …) Opt SR->SP: [17] Profile Switch Result (EID, ICCID, …) end @enduml Figure 9: Profile Enabling via SM-DP Start Conditions: a. The target Profile is disabled on the eUICC. Another Profile is enabled. b. The Subscription associate… …
3.5.8 Profile Disablingmodified
Profile disabling can be achieved by the following procedure. The request is issued directly by the Operator to the SM-SR associated with the target eUICC. @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox participant “M2M SP” as SP #FFFFFF Participant “Operator” as OP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-R” as ISDR #FFFFFF endbox OP->SR: [1] Profile Disabling Request \n(EID, ICCID) SR-->OP: [2] Fall-Back Attribute Conflict rnote over SR #FFFFFF [3] POL2 Check of current Enabled Profile endrnote SR-->OP: [4] POL2 Conflict Report SR<->ISDR: [5] Mutual Authentication SR->ISDR: [6] Provisioning Profile Enabling Request rnote over ISDR #FFFFFF [7] POL1 Check of current Enabled Profile IF OK, current Enabled Profile is Disabled and Profile with Fall-Back Attribute is Enabled endrnote ISDR->SR: [8] Profile Disabling Result rnote over SR #FFFFFF [9] EIS Update: Target Profile is now Disabled. Profile with Fall-Back Attribute is Enabled endrnote SR->OP: [10] Profile Disabling Result \n(EID, ICCID, …) Opt SR->SP: [11] Profile Disabling Result (EID, ICCID, …) end @enduml Figure 10: Profile Disabling Start Condition: The target Profile is enabled on the eUICC. Procedure: 1. The Operator sends a Profile Disabling request to the SM … Profile enabling request to the ISD-R on the eUICC for the Profile with Fall-Back Attribute set. 7. The eUICC performs an internal POL1 check for the currently … EnabledEnable d Profile, and verifies that the currently Enabled Profile does not have the Fall-Back Attribute set. If permitted, the Enabled Profile is disabled and the ISD-R… …
3.5.9 ISD-P Deletionmodified
A Profile can be deleted by its Operator. @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox participant “M2M SP” as SP #FFFFFF Participant “Operator” as OP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-R” as ISDR #FFFFFF Endbox OP->SR: [1] ISD-P Deletion Request\n(EID, ICCID) rnote over SR #FFFFFF [2] POL2 Check endrnote SR-->OP: [3] Error rnote over SR #FFFFFF [4] If Target Profile is Enabled, SM -SR starts Profile Disabling Procedure endrnote SR<->ISDR: [5] Authentication SR->ISDR: [6] ISD-P Deletion Request\n(ISD-P-AID) rnote over ISDR #FFFFFF [7] POL1 Check endrnote ISDR-->SR: [8] Error rnote over ISDR #FFFFFF [9] eUICC Deletes the Profile and related ISD-P endrnote ISDR->SR: [10] ISD-P Deletion Report rnote over SR #FFFFFF [11] EIS Update endrnote SR->OP: [12] ISD-P Deletion Report\n(EID, ICCID) Opt SR->SP: [13] ISD-P Deletion Report (EID, ICCID, …) end @enduml Figure 11: ISD-P Deletion Start Condition: The Operator decides to permanently delete a Profile on a eUICC. Procedure: 1. The Operator sends an ISD-P Deletion r… …
3.5.10 ISD-P Deletion via SM -DPmodified was ISD-P Deletion via SM-DP
… deletion would be requested via the SM-DP. In this case, the Operator does not have to be linked to all SM-SRs and relies on the SM-DP to make the connection. … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox participant “M2M SP” as SP #FFFFFF Participant “Operator” as OP #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-R” as ISDR #FFFFFF endbox OP->DP: [1] ISD-P Deletion Request\n(EID, ICCID, [SRID]) DP<->SR: [2] Mutual Authentication DP->SR: [3] ISD-P Deletion Request\n(EID, ICCID) Rnote over SR #FFFFFF [4] POL2 Check endrnote SR-->DP: [5] Error DP-->OP: [5] Error Rnote over SR #FFFFFF [6] If Target Profile is Enabled, SM -SR starts Profile Disabling procedure endrnote SR<->ISDR: [7] Mutual Authentication SR->ISDR: [8] ISD-P Deletion Request\n(ISD-P-AID) Rnote over ISDR #FFFFFF [9] POL1 Check endrnote ISDR-->SR: [10] Error Rnote over ISDR #FFFFFF [11] eUICC Deletes the Profile and related ISD-P endrnote ISDR->SR: [12] ISD-P Deletion Report Rnote over SR #FFFFFF [13] EIS Update endrnote SR->DP: [14] ISD-P Deletion Report\n(EID, ICCID) DP->OP: [15] ISD-P Deletion Report\n(EID, ICCID) Opt SR->SP: [16] ISD-P Deletion Report (EID, ICCID, …) end @enduml Figure 12: Operational Profile Deletion via SM-DPSM -DP Start Condition: The Operator decides to permanently delete a Profile on a eUICC. Procedure: 1. The Operator sends an ISD-P Deletion request to the SM-DP. The … …
3.5.11 SM-SR Changemodified
…ng, update Policy rules, delete the Profile). In the case where the SM-SR has to be changed, the credentials of the individual eUICCs must remain confidential. … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “M2M SP” as SP #FFFFFF Participant “Operator(s)” as OP #FFFFFF Participant “Initiator” as INI #FFFFFF Participant “SM-SR<size:7>1</size>” as SR1 #FFFFFF Participant “SM-SR<size:7>2</size>” as SR2 #FFFFFF Participant “eUICC” as EUICC #FFFFFF INI->SR2: [1] SM-SR Change Request SR2->INI: [2] Confirmation INI->SR1: [3] SM-SR Change Request SR1->SR2: [4] Send EIS Dataset SR2<->EUICC: [5] Key Establishment SR2->EUICC: [6] Delete keyset related\nto SM-SR<size:7>1</size> SR2->SR1: [7] Confirmation of\nSM-SR Change SR2->INI: [7] Confirmation of SM-SR Change Rnote over SR1 #FFFFFF [8] Deletes EIS dataset related to the eUICC endrnote SR1->INI: [9] Report of the SM-SR Change SR2->OP: [10] Report of the SM-SR Change Opt SR2->SP: [11] Report of the SM-SR Change end @enduml Figure 13: SM-SR Change Start Conditions: a. The EID of the eUICC is known b. The SRIDs of SM-SR1 and SM-SR2 are known. c. The ISD-R is personalised with the ke… …
3.5.15.1 Set Profile Lifecycle Management Authorisationmodified
This procedure sets the PLMAs on the SM-SR and includes which Platform Management commands are allowed to be executed by an M2M SP and which reports SHALL be sent to M2M SP and Operator. @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “M2M SP” as SP #FFFFFF Participant “Operator” as OP #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Alt [via SM-SR] OP->SR: [1.a] Set PLMA (M2M SP ID,\nIdentifier, PLMA List) Rnote over SR #FFFFFF [2] PLMA creation Endrnote SR->OP: [3.a] Set PLMA Report (Operator ID, \nIdentifier, PLMA List) Else [via SM-DP] OP->DP: [1.b] Set PLMA (M2M SP ID,\nIdentifier, PLMA List) Rnote over DP #FFFFFF Identify SM-SR Endrnote DP<->SR: Mutual Authentication DP->SR: [1.c] Set PLMA (M2M SP ID,\nIdentifier, PLMA List) Rnote over SR #FFFFFF [2] PLMA creation endrnote SR->DP: [3.b] Set PLMA Report (Operator ID,\nIdentifier, PLMA List) DP->OP: [3.c] Set PLMA Report (Operator ID, \nIdentifier, PLMA List) end SR->SP: [3.d] Set PLMA Report (Operator ID, \nIdentifier, PLMA List) @enduml Figure 14: Set Profile Lifecycle Management Authorisation Start Condition: The Operator opened a dedicated interface with the SM-SR, either directly or through … …
3.5.15.2 Retrieve Profile Lifecycle Management Authorisation– by Operatormodified
With this procedure the Operator retrieves the PLMA set on the SM-SR. @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “Operator” as OP #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Alt [via SM-SR] OP->SR: [1.a] Retrieve PLMA (M2M SP ID, Identifier) Rnote over SR #FFFFFF [2] Retrieve PLMA endrnote SR->OP: [3.a] Command Result (PLMA List) Else [via SM-DP] OP->DP: [1.b] RetrievePLMA (M2M SP ID, Identifier) Rnote over DP #FFFFFF Identify SM-SR Endrnote DP<->SR: Mutual Authentication DP->SR: [1.c] Retrieve PLMA (M2M SP ID, Identifier) Rnote over SR #FFFFFF [2] Retrieve PLMA endrnote SR->DP: [3.b] Command Result (PLMA List) DP->OP: [3.c] Command Result (PLMA List) end @enduml Figure 15: Retrieve Profile Lifecycle Management Authorisation by Operator Start Condition: a. The Operator opened a dedicated interface with the SM-SR, either … …
3.5.15.3 Retrieve Profile Lifecycle Management Authorisation– by M2M SPmodified
With this procedure, the M2M SP retrieves the PLMA the Operator has set on the SM-SR. @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “M2M SP” as SP #FFFFFF Participant “SM-SR” as SR #FFFFFF SP->SR: [1] Retrieve PLMA (Operator ID, \nIdentifier) SR->SP: [2] Command Result (PLMA List) @enduml Figure 16: Retrieve Profile Lifecycle Management Authorisation by M2M SPStart Condition: a. The M2M SP opened a dedicated interface with the SM-SR to be able to… …
3.5.15.4 Delete Profile Lifecycle Management Authorisationmodified
The delete PLMA requests comprises the following steps: @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “M2M SP” as SP #FFFFFF Participant “Operator” as OP #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Alt [via SM-SR] OP->SR: [1.a] Delete PLMA (M2M SP ID, Identifier) Rnote over SR #FFFFFF [2] PLMA deletion endrnote SR->OP: [3.a] Delete PLMA Report (Operator ID, Identifier) Else [via SM-DP] OP->DP: [1.b] Delete PLMA (M2M SP ID, Identifier) Rnote over DP #FFFFFF Identify SM-SR Endrnote DP<->SR: Mutual Authentication DP->SR:[1.c] Delete PLMA (M2M SP ID, Identifier) Rnote over SR #FFFFFF [2] PLMA deletion endrnote SR->DP: [3.b] Delete PLMA Report (Operator ID, Identifier) DP->OP: [3.c] Delete PLMA Report (Operator ID, Identifier) end SR->SP: [3.d] Delete PLMA Report (Operator ID, Identifier) @enduml Figure 17: Delete Profile Lifecycle Management Authorisation Start Condition: a. The Operator opened a dedicated interface with the SM-SR, either directly or th… …
3.5.16 Profile Enabling via M2M SPmodified
…thorisation for the M2M SP SHALL be configured in the SM- SR (see Profile Lifecycle Management Authorisation Registration at SM-SR chapter 3.5.15 for details). … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “Operator” as OP #FFFFFF Participant “M2M SP” as SP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-R” as ISDR #FFFFFF Endbox SP->SR: [1] Profile Enabling from M2M SP Request \n(M2M SP ID, EID, ICCID) Rnote over SR #FFFFFF [2] – POL2 Check of currently Enabled Profile and Target Profile - Check of M2M SP PLMA Endrnote SR-->SP: [3a] Conflict Report SR-->OP: [3b] Conflict Report SR<->ISDR: [4] Mutual Authentication SR->ISDR: [5] Profile Enabling Request Rnote over ISDR #FFFFFF [6] POL1 Check of currently Enabled Profile and Target Profile Endrnote ISDR-->SR: [7] Conflict Report SR-->SP: [8a] Conflict Report SR->OP: [8b] Conflict Report Rnote over ISDR #FFFFFF [9] Currently Enabled Profile is Disabled. Target Profile is Enabled Endrnote ISDR->SR: [10] Profile Switch Confirmation Rnote over SR #FFFFFF [11] EIS Update: Target Profile is now Enabled. Previously Profile is Disabled Endrnote SR->SP: [12] Profile Switch Result opt SR-->OP: [13] Profile Switch Result end @enduml Figure 18: Profile Enabling via M2M SP Start Conditions: a. The target Profile is disabled on the eUICC. Another Profile is enabled. b. The Subscription associa… …
3.5.17 Profile Disabling via M2M SPmodified
…uthorisation for the M2M SP SHALL be configured in the SM-SR (see Profile Lifecycle Management Authorisation Registration at SM-SR chapter 3.5.15 for details). … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “Operator” as OP #FFFFFF Participant “M2M SP” as SP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-R” as ISDR #FFFFFF Endbox SP->SR: [1] Profile Disabling from M2M SP Request \n(M2M SP ID, EID, ICCID) Rnote over SR #FFFFFF [2] – Check of Fall-Back Attribute set [3] - POL2 Check of currently Enabled Profile - Check of M2M SP PLMA Endrnote SR-->SP: [4a] Conflict Report SR-->OP: [4b] Conflict Report SR<->ISDR: [5] Mutual Authentication SR->ISDR: [6] Profile Disabling Request Rnote over ISDR #FFFFFF [7] POL1 Check of currently Enabled Profile endrnote ISDR-->SR: [8] Conflict Report SR-->SP: [9a] Conflict Report SR-->OP: [9b] Conflict Report Rnote over ISDR #FFFFFF [10] - Currently Enabled Profile is Disabled - Fall-Back Profile is Enabled endrnote ISDR->SR: [11] Disabling Profile Confirm ation Rnote over SR #FFFFFF [12] EIS update: Target Profile is Disabled Endrnote SR->SP: [13] Profile Disabling Result Opt SR-->OP: [14] Profile Disabling Result end @enduml Figure 19: Profile Disabling via M2M SP Start Conditions: The target Profile is enabled on the eUICC. Procedure: 1. The M2M SP sends a Profile Disabling from M2… …
3.5.18 ISD-P Deletion via M2M SPmodified
…uthorisation for the M2M SP SHALL be configured in the SM-SR (see Profile Lifecycle Management Authorisation Registration at SM-SR chapter 3.5.15 for details). … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “Operator” as OP #FFFFFF Participant “M2M SP” as SP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-R” as ISDR #FFFFFFEndbox SP->SR: [1] ISD-P Deletion Request\n(M2M SP ID, EID, ICCID) rnote over SR #FFFFFF [2] POL2 Check, PLMA endrnote SR-->SP: [3a] Error SR-->OP: [3b] Error rnote over SR #FFFFFF [4] If Target Profile is Enabled, SM -SR starts Profile Disabling Procedure endrnote SR<->ISDR: [5] Authentication SR->ISDR: [6] ISD-P Deletion Request\n(ISD-P-AID) rnote over ISDR #FFFFFF [7] POL1 Check endrnote ISDR-->SR: [8] POL1 Conflict SR-->SP: [9a] POL1 Conflict SR-->OP: [9b] POL1 Conflict rnote over ISDR #FFFFFF [10] eUICC Deletes the Profile and related ISD-P endrnote ISDR->SR: [11] ISD-P Deletion Report rnote over SR #FFFFFF [12] EIS Update endrnote SR->SP: [13] ISD-P Deletion Report\n(M2M SP ID, EID, ICCID) opt SR->OP: [14] ISD-P Deletion Report\n(M2M SP ID, EID, ICCID) end @enduml Figure 20: ISD-P Deletion via M2M SP Start Conditions: The M2M SP decides to permanently delete a Profile on a eUICC. Procedure: 1. The M2M SP sends an ISD-P De… …
3.5.19 Fall-Back Attribute Managementmodified
…un-sets the Fall-Back Attribute on a Profile. The Fall-Back Attribute is only un-set as the consequence of setting the Fall- Back Attribute on another Profile. … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “M2M SP” as SP #FFFFFF Participant “Operator 1\n<size:10>(owning Profile A)</size>” as OP1 #FFFFFF Participant “Operator 2\n<size:10>(owning Profile B)</size>” as OP2 #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF Alt [via SM-SR] OP2->SR: [1.a] Set Fall-Back Attribute\non Profile B Request Else [via SM-DP] OP2->DP: [1.b] Set Fall-Back Attribute\non Profile B Request Rnote over DP #FFFFFF Identify SM-SR Endrnote DP<->SR: Mutual Authentication DP->SR: [1.c] Set Fall-Back Attribute\non Profile B Request end Rnote over SR #FFFFFF [2] Check PLMA Endrnote SR-->OP2: [2.a] report PLMA conflict SR->EUICC: [3] Set Fall-Back Attribute\non Profile B Rnote over EUICC #FFFFFF [4] Unset Fall-Back Attribute on Profile A by Setting Fall-Back Attribute on Profile B Endrnote EUICC->SR: [5] Set Fall-Back Attribute Report Rnote over SR #FFFFFF [6] EIS Update Endrnote SR->OP1: [7] Unset Fall-Back Attribute Report of Profile A SR->OP2: [8] Set Fall-Back Attribute Report of Profile B Opt [If if requested by Operator 1] SR->SP: [9] Unset Fall-Back Attribute Report of Profile A End Opt [If if requested by Operator 2] SR->SP: [10] Set Fall-Back Attribute Report of Profile B end @enduml Figure 21: Fall-Back Attribute Management Start Conditions: a. Profile A with Fall-Back Attribute set. b. Profile B, targeted to have the Fall-Back Attribute se… …
3.5.20 Fall-Back Attribute Management via the M2M SPmodified
… un-sets the Fall-Back Attribute on a Profile. The Fall-Back Attribute is only unset as the consequence of setting the Fall- Back Attribute on another Profile. … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “M2M SP” as SP #FFFFFF Participant “Operator 1\n<size:10>(owning Profile A)</size>” as OP1 #FFFFFF Participant “Operator 2\n<size:10>(owning Profile B)</size>” as OP2 #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF SP->SR: [1] Set Fall-Back Attribute on Profile B Request Rnote over SR #FFFFFF [2] Check PLMA for Setting Fall-Back Attribute from Operator 2 Endrnote SR-->SP: [2.a] report PLMA conflict Rnote over SR #FFFFFF [3] Check PLMA for Unsetting Fall -Back Attribute from Operator 1 Endrnote SR-->SP: [3.a] report PLMA conflict SR->EUICC: [4] Set Fall-Back Attribute on Profile B Rnote over EUICC #FFFFFF [5] Unset Fall-Back Attribute on Profile A by Setting Fall-Back Attribute on Profile B Endrnote EUICC->SR: [6] Set Fall-Back Attribute Report Rnote over SR #FFFFFF [7] EIS Update Endrnote SR->OP1: [8] Unset Fall-Back Attribute Report of Profile A SR->OP2: [9] Set Fall-Back Attribute Report of Profile B SR->SP: [10] Set Fall-Back Attribute Report of Profile B @enduml Figure 22: Fall-Back Attribute Management via M2M SP Start Conditions: a. Profile A with Fall-Back Attribute set. b. Profile B, targeted to have the Fall-Back A… …
3.5.21 Emergency Profile Attribute Managementmodified
…ergency Profile Attribute is only unset as a consequence of setting the Emergency Profile Attribute on another Profile. For case 1 the procedure below applies: … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “M2M SP” as SP #FFFFFF Participant “Operator 1\n<size:10>(owning Profile A)</size>” as OP1 #FFFFFF Participant “Operator 2\n<size:10>(owning Profile B)</size>” as OP2 #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF Alt [via SM-SR] OP2->SR: [1.a] Set Emergency Profile Attribute\non Profile B Request Else [via SM-DP] OP2->DP: [1.b] Set Emergency Profile Attribute\non Profile B Request Rnote over DP #FFFFFF Identify SM-SR Endrnote DP<->SR: Mutual Authentication DP->SR: [1.c] Set Emergency Profile Attribute\non Profile B Request end SR->EUICC: [2] Set Emergency Profile Attribute\non Profile B Rnote over EUICC #FFFFFF [3a] Verify if Profile B has not set Fall -Back Attribute Endrnote EUICC-->SR: [3.a] report error Rnote over EUICC #FFFFFF [3b] Set Emergency Profile Attribute on Profile B Endrnote EUICC->SR: [4] Set Emergency Profile Attribute Report Rnote over SR #FFFFFF [5] EIS Update Endrnote SR->OP2: [6] Set Emergency Profile Attribute Report of Profile B SR->OP1 Opt [If if requested by Operator 2] SR->SP: [7] Set Emergency Profile Attribute Report of Profile B end @enduml Figure 23: Emergency Profile Attribute Management (case 1) Start Conditions (case 1): a. No Profile with Emergency Profile Attribute set exists. b. Profile B, t … during PLMA registrations (see 3.5.155). End Conditions (case 1): The Profile B has the Emergency Profile Attribute set. For case 2 the procedure below applies … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “M2M SP” as SP #FFFFFF Participant “Operator 1\n<size:10>(owning Profile A)</size>” as OP1 #FFFFFF Participant “Operator 2\n<size:10>(owning Profile B)</size>” as OP2 #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF Alt [via SM-SR] OP2->SR: [1.a] Set Emergency Profile Attribute\non Profile B Request Else [via SM-DP] OP2->DP: [1.b] Set Emergency Profile Attribute\non Profile B Request Rnote over DP #FFFFFF Identify SM-SR Endrnote DP<->SR: Mutual Authentication DP->SR: [1.c] Set Emergency Profile Attribute \non Profile B Request end Rnote over SR #FFFFFF [2] Check PLMA for Set Emergency Profile Attribute for Operator 2 Endrnote SR-->OP2: [2.a] report authorisation conflict SR->EUICC: [3] Set Emergency Profile Attribute\non Profile B Rnote over EUICC #FFFFFF [4a] Verify if Profile B has not set Fall -Back Attribute Endrnote EUICC-->SR: [4.a] report error Rnote over EUICC #FFFFFF [4b] Unset Emergency Profile Attribute on Profile A by Setting Emergency Profile Attribute on Profile B Endrnote EUICC->SR: [5] Set Emergency Profile Attribute Report Rnote over SR #FFFFFF [6] EIS Update Endrnote SR->OP2: [7] Set Emergency Profile Attribute Report of Profile B SR->OP1 Opt [If if requested by Operator 1] SR->SP: [8] Unset Emergency Profile Attribute Report of Profile A End Opt [If if requested by Operator 2] SR->SP: [9] Set Emergency Profile Attribute Report of Profile B end @enduml Figure 24: Emergency Profile Attribute Management (case 2) Start Conditions (case 2): a. Profile A with Emergency Profile Attribute set. b. Profile B, targeted… …
3.5.22 Emergency Profile Attribute Management via the M2M SPmodified
… the M2M SP the authorisation to set the Emergency Profile Attribute on its respective Profile. For case 2. the Operator1 owning the Profile that currently has … theth e Emergency Profile Attribute set and the Operator2 that agree to have the Emergency Profile Attribute set on its own Profile need to have an agreement with the M … ergency Profile Attribute is only unset as a consequence of setting the Emergency Profile Attribute on another Profile. For case 1 the procedure below applies: … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “M2M SP” as SP #FFFFFF Participant “Operator 1\n<size:10>(owning Profile A)</size>” as OP1 #FFFFFF Participant “Operator 2\n<size:10>(owning Profile B)</size>” as OP2 #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF SP->SR: [1] Set Emergency Profile Attribute on Profile B Request Rnote over SR #FFFFFF [2] Check PLMA for Setting Emergency Profile Attribute from Operator 2 Endrnote SR-->SP: [2.a] report authorisation conflict SR->EUICC: [3] Set Emergency Profile Attribute on Profile B Rnote over EUICC #FFFFFF [4a] Verify if Profile B has not set Fall -Back Attribute Endrnote EUICC-->SR: [4.a] report error Rnote over EUICC #FFFFFF [4b] Set Emergency Profile Attribute on Profile B Endrnote EUICC->SR: [5] Set Emergency Profile Attribute Report Rnote over SR #FFFFFF [6] EIS Update Endrnote SR->OP2: [7] Set Emergency Profile Attribute Report of Profile B SR->OP1 SR->SP: [8] Set Emergency Profile Attribute Report of Profile B @enduml Figure 25: Emergency Profile Attribute Management via M2M SP (case 1) Start Conditions: a. Profile B, targeted to have the Emergency Profile Attribute set, pres … gency Profile Attribute is now set for Profile B. End Conditions: The Profile B has the Emergency Profile Attribute set. For case 2 the procedure below applies: … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “M2M SP” as SP #FFFFFF Participant “Operator 1\n<size:10>(owning Profile A)</size>” as OP1 #FFFFFF Participant “Operator 2\n<size:10>(owning Profile B)</size>” as OP2 #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF SP->SR: [1] Set Emergency Profile Attribute on Profile B Request Rnote over SR #FFFFFF [2] Check PLMA for Setting Emergency Profile Attribute from Operator 2 Endrnote SR-->SP: [2.a] report authorisation conflict Rnote over SR #FFFFFF [3] Check PLMA for Unsetting Emergency Profile Attribute from Operator 1 Endrnote SR-->SP: [3.a] report authorisation conflict SR->EUICC: [4] Set Emergency Profile Attribute on Profile B Rnote over EUICC #FFFFFF [5a] Verify if Profile B has not set Fall -Back Attribute Endrnote EUICC-->SR: [5.a] report error Rnote over EUICC #FFFFFF [5b] Unset Emergency Profile Attribute on Profile A by Setting Emergency Profile Attribute on Profile B Endrnote EUICC->SR: [6] Set Emergency Profile Attribute Report Rnote over SR #FFFFFF [7] EIS Update Endrnote SR->OP2: [8] Set Emergency Profile Attribute Report of Profile B SR->OP1 SR->SP: [9] Set Emergency Profile Attribute Report of Profile B @enduml Figure 26: Emergency Profile Attribute Management via M2M SP (case 2) Start Conditions: a. Profile A with Emergency Profile Attribute set. b. Profile B, target… …
3.5.23 Local Enable of the Test Profilemodified
A switch from Operational Profile to the Test Profile can be achieved by the following dedicated procedure. The request is issued directly from the Device to the eUICC. @startuml skinparam monochrome true skinparam ArrowColor Black skinparam maxmessagesize 450 skinparam ParticipantPadding 100 skinparam sequenceArrowThickness 1 hide footbox participant “Device” as DEV #FFFFFF participant “eUICC” as EUICC #FFFFFF DEV->EUICC: [1] Local Enabling request rnote over EUICC #FFFFFF [2] Verify that the Test Profile exists endrnote EUICC-->DEV: Error rnote over EUICC #FFFFFF [3] Verify that the currently Enabled Profile is NOT the Emergency Profile endrnote EUICC-->DEV: Error rnote over EUICC #FFFFFF [4] Verify that the currently Enabled Profile is NOT the Test Profile endrnote EUICC-->DEV: Error group Profile switch rnote over EUICC #FFFFFF [5] Enable Test Profile endrnote EUICC->DEV: [6] Profile Enabling Result EUICC->DEV: [7] REFRESH end @enduml Start Conditions: An Operational Profile is enabled. Procedure: 1. The Device sends a Local Enable request to the eUICC. 2. The eUICC performs a verification that the Test Profile tois bepresent enabledin isthe aeUICC, sending an Error in case no Test Profile.Profile exists. 3. IfThe theeUICC Profileverifies tothat bethe enabledcurrently Enabled Profile is not athe TestEmergency Profile, if it is the eUICCEmergency SHALLProfile, abortthe eUICC aborts the procedure andsending informsan theerror. Device. 4. The eUICC performsverifies that the currently Enabled Profile switch,is withoutnot enforcingthe POL1,Test resultingProfile; inif it is the Test ProfileProfile, beingthe enabledeUICC andaborts the previouslyprocedure Enabledsending Profilean beingerror. disabled. 5. The eUICC storesEnables the ISD-PTest AIDProfile ofwithout enforcing POL1. 6. The eUICC sends the previouslyProfile enabledEnabling Operationalresult Profile.to 6.the Device. 7. The eUICC reportssends thea ProfileREFRESH switchproactive command in UICC reset mode to the Device. End Condition: The Test Profile is enabled on the eUICC. The previously enabled Operational Profile is disabled.
3.5.24 Local Disable of the Test Profilemodified
Local Disable can be achieved by the following procedure. The request is issued directly by the Device to the eUICC. @startuml skinparam monochrome true skinparam ArrowColor Black skinparam maxmessagesize 450 skinparam ParticipantPadding 100 skinparam sequenceArrowThickness 1 hide footbox participant “SM-SR” as SR #FFFFFF participant “Device” as DEV #FFFFFF participant “eUICC” as EUICC #FFFFFF DEV->EUICC: [1] Local Disabling request rnote over EUICC #FFFFFF [2] Verify that the currently Enabled Profile is the Test Profile endrnote EUICC-->DEV: Error group Profile switch rnote over EUICC #FFFFFF [3] Test Profile is Disabled and the previously Disabled Operational Profile is enabled endrnote EUICC->DEV: [4] Profile Disabling Result EUICC->DEV: [5] REFRESH opt EUICC->SR: [6] Profile Disabling Result end end @enduml Start Condition: The Test Profile is enabled on the eUICC. Procedure: 1. The Device sends a Local Disable request to the eUICC. 2. IfThe theeUICC Profileverifies tothat bethe disabledcurrently isEnabled notProfile ais the Test ProfileProfile, thenif it’s not, the LocaleUICC Disableaborts SHALLthe NOTprocedure beand executed.sends an error. 3. The eUICC enablesDisables the previouslyTest enabledProfile and Enables the Previously Disabled Operational Profile. 4. IfThe eUICC sends the networkProfile attachDisabling fails,result to the Device. 5. The eUICC SHALLsends activatea REFRESH proactive command in UICC reset mode to the Fall-BackDevice. Mechanism.NOTE: 5.In Thecase eUICCof reportsany error after this step, indicating that the currently Enabled Profile switchcannot toprovide connectivity, the Device.eUICC 6.will Thetrigger eUICCthe MAYFall-Back reportMechanism and will ensure that the successfulpreviously enabled Profile is the Profile that was enabled before the Local DisableEnable. 6. If configured, the eUICC sends the Profile Disabling result to the SM-SR. If applicable, the SM-SR informs the Operator and/or the M2M SP accordingly. End Condition: The Test Profile is disabled on the eUICC, and the previously Enabled Profile or the Profile with Fall-Back Attribute set is enabled.
3.5.25 Local Enable of the Emergency Profileadded
The following operation allows the Emergency Profile to be enabled when needed. This local operation is directly triggered by the Device. @startuml skinparam monochrome true skinparam ArrowColor Black skinparam maxmessagesize 450 skinparam ParticipantPadding 100 skinparam sequenceArrowThickness 1 hide footbox participant “Device” as DEV #FFFFFF participant “eUICC” as EUICC #FFFFFF DEV->EUICC: [1] Local Enabling request rnote over EUICC #FFFFFF [2] Verify that the Emergency Profile exists endrnote EUICC-->DEV: Error rnote over EUICC #FFFFFF [3] Verify that the currently Enabled Profile is NOT the Emergency Profile endrnote EUICC-->DEV: Error group Profile switch rnote over EUICC #FFFFFF [4] Enable Emergency Profile endrnote EUICC->DEV: [5] Profile Enabling Result EUICC->DEV: [6] REFRESH end @enduml Start Condition: A Profile is Enabled. Procedure: 1. The Device sends a Local Enable request to the eUICC for the Emergency Profile. 2. The eUICC verifies that the Emergency Profile is present in the eUICC, sending an Error in case no Emergency Profile exists. 3. The eUICC verifies that the currently Enabled Profile is not the Emergency Profile, if it is the Emergency Profile, the eUICC aborts the procedure sending an error. 4. The eUICC performs the Profile switch, without enforcing POL1, the Emergency Profile is Enabled and the Previously Enabled Profile is Disabled. 5. The eUICC sends the Profile Enabling result to the Device. 6. The eUICC sends a REFRESH proactive command in UICC reset mode to the Device. End Condition: The Emergency Profile is enabled on the eUICC. The previously enabled Profile is disabled.
3.5.26 Local Disable of the Emergency Profileadded
The following operation locally disables the Emergency Profile, enabling the previously Enabled Profile. @startuml skinparam monochrome true skinparam ArrowColor Black skinparam maxmessagesize 450 skinparam ParticipantPadding 100 skinparam sequenceArrowThickness 1 hide footbox participant “SM-SR” as SMSR #FFFFFF participant “Device” as DEV #FFFFFF participant “eUICC” as EUICC #FFFFFF DEV->EUICC: [1] Local Disabling request rnote over EUICC #FFFFFF [2] Verify that the currently Enabled Profile is the Emergency Profile endrnote EUICC-->DEV: Error group Profile switch rnote over EUICC #FFFFFF [3] Emergency Profile is Disabled and the previously Disabled Profile is Enabled endrnote EUICC->DEV: [4] Profile Disabling Result EUICC->DEV: [5] REFRESH opt EUICC->SMSR: [6] Profile Disabling Result end end @enduml Start Condition: The Emergency Profile is Enabled. Procedure: 1. The Device sends a Local Disable request to the eUICC. 2. The eUICC verifies that the currently Enabled Profile is the Emergency Profile, if it’s not, the eUICC aborts the procedure and sends an error. 3. The eUICC Disables the Emergency Profile and Enables the previously Enabled Profile. 4. The eUICC sends the Profile Disabling result to the Device. 5. The eUICC sends a REFRESH proactive command in UICC reset mode to the Device . NOTE: In case of any error after this step, indicating that the currently En abled Profile cannot provide connectivity, the eUICC will trigger the Fall-Back Mechanism and will ensure that the previously enabled Profile is the Profile that was enabled before the Local Enable. 6. If configured, the eUICC sends the Profile Disabling result to the SM-SR. If applicable, the SM-SR informs the Operator and/or the M2M SP accordingly. End Condition: The Emergency Profile is disabled on the eUICC and the previously Enabled Profile or the Profile with Fall-Back Attribute set is enabled.
4.4.2 Security Realms Requirementsmodified
# Requirement SR1 Security realms SHALL be identifiable and mutually authenticated for the purpose of any communication. SR2 Communication between the SM-SR and the eUICC SHALL be protected against SR2 replay attacks. An entity within a security realm MAY need authorisation before communication SR3 exchange. Any end to end data communication between two security realms of the eUICC SR4 ecosystem SHALL be origin authenticated, integrity and confidentiality protected, SR4 protected against replay attacks and non-reputable. Non-repudiation MAY not apply to communication with the eUICC. Network communication links used inside a security realm SHALL be dedicated – i.e. SR5 neither public network, neither mutualised. E.g. solutions such as MPLS or GRE are SR5 not considered as dedicated links; a solution such as an authenticated and secured VPN is considered as dedicated. When two security realms are exchanging data, … agreed security level between them. SR7 Security realms SHALL enforce filtering rules so that only authorised entities are granted access to allowed services. … SR8 When negotiating a communication, at least the lowest acceptable common SR8 cryptographic suite SHALL apply.
4.4.3 eUICC Requirementsmodified
# Requirement eUICC SHALL be certified according to the GSMA Embedded UICC Protection Profile SE1 [27][27]. . Void SE2 Void SE3 SE4 The eUICC platform SHALL be in line with Common Criteria EAL4+ - EAL4 augmented by AVA_VAN.5 and ALC_DVS.2. SE5 Upon Profile deletion, the eUICC SHALL ensure of the complete wipe of the Profile. SE6 eUICC SHALL only accept Platform and Profile Management commands sent from SE6 an authorised SM-SR or SM-DP. SE7 The integrity of the Profile SHALL be ensured before its installation in the eUICC. eUICC SHALL reject any Platform and Profi… …
4.4.4 SM-SR and SM -DP Requirementsmodified was SM-SR and SM-DP Requirements
…y. The Operator SHALL be able to update the OTA Keys in its Profile on the eUICC in a SM9 secure and confidential way reusing existing OTA Platform mechanisms. … SM10 There SHALL be a secure end to end communication channel between the Security SM10 Realms which host the SM-DP function and the eUICC during the Profile installation.
4.5.1 Secure Download and Installation of a Profilemodified
This section describes the security details related to the procedure stated in section 3.5.4. Download and installation of a Profile SHALL be done in a secure way, as follows: @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “Operator” as OP #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF OP->DP: [1.a] Profile Download Request Rnote over DP #FFFFFF [1.b] SM-SR Identification Endrnote DP->SR: [1.c] Get eUICC info set (EIS) of EID SR-->EUICC: [1.d] Void SR->DP: [1.e] Send eUICC info set (EIS) of EID Rnote over DP #FFFFFF [1.f] EIS check Endrnote DP-->OP: [1.g] if EIS Conflict, notify DP->SR: [2.a] ISD-P creation SR->EUICC: [2.b] ISD-P creation EUICC->SR: [2.c] Creation response SR->DP: [2.d] Creation response DP-->OP: [2.e] if failure, notify DP<->EUICC: [3] Secure Channel establishment: \nsession keyset (cf. section 4.5.1.2) Rnote over DP #FFFFFF [4] Encrypt and sign the Profile using the session keyset endrnote DP->EUICC: [5] Send the Profile encrypted and singed \nwith the session keyset Rnote over EUICC #FFFFFF [6-7] Verify, decrypt and install Profile Using the session keyset Endrnote EUICC->SR: [8.a] Profile Download Confirmation\n(EID, …) Rnote over SR #FFFFFF [8.b] EIS Update Endrnote SR->DP: [8.c] Profile Download Confirmation \n(EID, …) DP->OP: [8.d] Profile Download Confirmation \n(EID, …) @enduml Figure 30: Secure Download and Installation of a Profile The process between the Operator and the eUICC SHALL be as follows: Start Conditions: A. Operator and S… …
4.5.1.2 Key Agreementmodified
…f the eUICC to the SM-DP is mandatory. The mutual authentication of the SM-DP and the eUICC is mandatory. The following figure details the step 3 of Figure 30. … @startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “Operator” as OP #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-P” as ISDP #FFFFFF endbox DP->ISDP: [3.a] Initiate key agreement Rnote over ISDP #FFFFFF [3.b] Calculate ShS, derive keyset Endrnote ISDP->DP: [3.c] Key agreement response Rnote over DP #FFFFFF [3.d] Calculate ShS derive keyset Endrnote @enduml Figure 31: Key Set Establishment: Key Agreement Protocol (overview)
5.1 SM-SR and SM -DP Compliance Requirementsmodified was SM-SR and SM-DP Compliance Requirements
B Risk Matrix (Informative)modified
This section lists risks, related impacted sensitive assets and impacted properties (C=Confidentiality, I=Integrity, A=Availability).A=Availa bility). Impacts # Risks Definition Assets C I A Generic Risks Penetration on a server managing master keys or private keys, loss of Failure in certificates or V01 private keys chain confidentiality due to human error or malevolence might lead to loss of all certificates private keys chain trust in the entire process chain. Authentication algorithm Weakening of authentication algorithms due to malevolence, human error eUICC V02 breach or other means. authentication algorithm A breakthrough in cryptographic research might lead to the weakening or All assets using V03 Cryptographic breakthrough total loss of authentication and ciphering schemes. cryptographic primitives V04 EID tampering Installation of Profile on a wrong eUICC Profile Provisioning … ectivity chain to eUICC management of eUICC, and cause loss of services. Critical component Lax policies in network access or interconnection might lead to the … V06 eUICC V06 communication interception interception and loss of confidentiality in critical assets such as Profiles. eUICC Penetration of the Lax policies in network access or interconnection might lead to the V07 Subscription Management network components interception, alteration or deletion of critical assets such as Profiles. network components network Rogue component insertion A malicious or compromised partner might introduce a rogue component V08 within trusted network (e.g. within a security domain leading … ical information such as the Profile or a management command. Confidentiality loss of Interception of transport key might lead to unsolicited connection to the … data protection key and its V09 transport keys used to deliver eUICC or network component in order to perform denial of service, theft data protection key and its V09 certificate the Profile up to the eUICC of service or impersonation. Confidentiality or integrity loss Profiles Communication of Profiles over non protected networks might lead to the Profiles V10 of Profile during Provisioning interception or tampering of transiting Profiles eUICC or delivery Insufficient isolation of Profiles on the eUICC migh … s the the eUICC Profiles K. Human error, malevolence or action from a malicious 3rd party might lead management function key Rogue Profile and Platform … V12 to unsolicited Profile or Platform Management commands resulting in loss Management commands eUICC of service, impersonation or fraud. PCF files Human error, malevolence or compromising of the PCF might enable V13 PCF breach Profiles scenarios where a Profile is able to bypass operators Profile policies eUICC eUICC Risks Failure in providing a secure eUICC might lead to physical or logical V14 eUICC tampering eUICC attacks that might allow leaking or modifying of installed Profiles. eUICC It might be possible for an attacker to install a valid Profile on a non-trusted Installation of Profile within a V15 eUICC (being soft or hardware) thus allow… …
D.2 Details on the ElGamal Key Agreementmodified
@startuml skinparam monochrome true skinparam ArrowColor Black hide footbox Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF Rnote over DP #FFFFFF [1] Verify eUICC Cert and EUM signature Endrnote DP->SR: [2.1] Key agreement initiation\n(SM-DP Certificate) SR->EUICC: [2.2] Key agreement initiation\n(SM-DP Certificate) Rnote over DP #FFFFFF [3.1] Generation of SKeph and PKeph Endrnote DP->SR: [3.2] Keyset generation Request (PKeph) SR->EUICC: [3.3] Keyset generation request Rnote over EUICC #FFFFFF [3.4] a. ISD-P provides ECASD with PKeph b. ECASD generates its ShS from eUICC's SK and SM -DP PKeph c. ISD-P generates its keys and receipt endrnote EUICC->SR: [3.5] Confirmation (receipt) SR->DP: [3.6] Confirmation (receipt) Rnote over DP #FFFFFF [4] Generate ShS from SKeph and eUICC PK Derive key Verify receipt and validity endrnote DP<->EUICC: Mutual Authentication OK @enduml Figure 32 : ElGamal Key Agreement Start Condition: The SM-SR has connectivity with the eUICC. 1. The SM-DP verifies the eUICC Certificate, which carries a signa … ShS to generate its own key pair as well as a receipt from the operation. 3-5. The ISD-P passes a confirmation (with receipt) of the generation back to the SM- … SR..SR. 3-6. The SM-SR passes the confirmation back to the SM-DP. 4. The SM-DP generates ShS from the ephemeral secret key SKeph and the eUICCs public key. The SM-DP u… …
Contents
- 1 Introduction
- 1.1 Overview
- 1.2 Void
- 1.3 Scope
- 1.4 Intended Audience
- 1.5 Definition of Terms
- 1.6 Abbreviations
- 1.7 References
- 1.8 Conventions
- 2 Basic Principles and Assumptions
- 2.1 Basic Principles
- 2.2 General Assumptions
- 2.2.1 Use of Existing Standards
- 2.2.2 Machine to Machine Device Impact
- 2.2.3 Security
- 2.2.4 Regulatory
- 2.3 The eUICC Ecosystem
- 2.3.1 Roles and Entities
- 2.4 The eUICC
- 2.4.1 Profiles
- 2.4.2 Policies & Policy Control
- 2.5 Profile Attributes
- 3 Architecture
- 3.1 Architecture Diagram
- 3.2 Card Architecture
- 3.2.1 Security Domains
- 3.2.2 Card Architecture
- 3.2.3 State Diagram for an ISD-P
- 3.3 Relevant Roles and Functions
- 3.3.1 Functions Definition
- 3.3.2 Void
- 3.4 Profile Description
- 3.4.1 General Content of a Profile Installed on an eUICC
- 3.4.2 Access to the Content of a Profile
- 3.5 Procedures
- 3.5.1 eUICC Registration at SM-SR
- 3.5.2 Un-personalised Profile Verification (Proprietary)
- 3.5.3 Profile Ordering (Proprietary)
- 3.5.4 Profile Download and Installation
- 3.5.5 Master Delete
- 3.5.6 Profile Enabling
- 3.5.7 Profile Enabling via SM -DP
- 3.5.8 Profile Disabling
- 3.5.9 ISD-P Deletion
- 3.5.10 ISD-P Deletion via SM -DP
- 3.5.11 SM-SR Change
- 3.5.12 ISD-P Key Establishment Procedure
- 3.5.13 Fall-Back Mechanism
- 3.5.14 eUICC Certificate Verification
- 3.5.15 Profile Lifecycle Management Authorisation Registration at SM- SR
- 3.5.16 Profile Enabling via M2M SP
- 3.5.17 Profile Disabling via M2M SP
- 3.5.18 ISD-P Deletion via M2M SP
- 3.5.19 Fall-Back Attribute Management
- 3.5.20 Fall-Back Attribute Management via the M2M SP
- 3.5.21 Emergency Profile Attribute Management
- 3.5.22 Emergency Profile Attribute Management via the M2M SP
- 3.5.23 Local Enable of the Test Profile
- 3.5.24 Local Disable of the Test Profile
- 3.5.25 Local Enable of the Emergency Profile
- 3.5.26 Local Disable of the Emergency Profile
- 3.6 Policy Control
- 3.6.1 Overview Diagram of Rule Management System
- 3.6.2 Policy Rules Management
- 3.6.3 Policy Control Mechanism
- 4 Security Model: Threats Analysis & Risk Assessment Model
- 4.1 Security Challenges
- 4.2 Security Analysis Methodology
- 4.3 Aim of the Security Realm Approach
- 4.4 Security Requirements
- 4.4.1 General Security Requirements
- 4.4.2 Security Realms Requirements
- 4.4.3 eUICC Requirements
- 4.4.4 SM-SR and SM -DP Requirements
- 4.4.5 Machine to Machine Device Requirements
- 4.4.6 Policy Control Function
- 4.5 Security Architecture
- 4.5.1 Secure Download and Installation of a Profile
- 4.5.2 Mutual Authentication
- 5 Compliance requirements
- 5.1 SM-SR and SM -DP Compliance Requirements
- 5.2 eUICC Compliance requirements
- 5.3 EUM Compliance requirements
- A Interfaces
- A.1 EUM – SM-SR interface
- A.2 Operator – SM-DP Interface
- A.3 SM-DP – SM-SR Interface
- A.4 Operator – SM-SR interface
- A.5 SM-SR – eUICC interface
- A.6 SM-SR – SM-SR Interface
- A.7 Operator – eUICC interface
- A.8 M2M SP – SM-SR interface
- A.9 Device – eUICC interface
- B Risk Matrix (Informative)
- C List of Sensitive Assets (Informative)
- D Additional Information Related to Section 4.5 (Informative)
- D.1 Void
- D.2 Details on the ElGamal Key Agreement
- D.3 Calculation of the keyset (Ke, Km, Ku)
- D.4 Role of the EUM in the Certificate Chain
- D.5 Mutual Authentication Binding to a SOA Environment
- D.5.1 Authentication
- E Void
- F Profile Creation, Ordering and Personalisation (Informative)
Embedded SIM Remote Provisioning Architecture
Version 4.1
05 June 2020This is a Non-binding Permanent Reference Document of the GSMA
Security Classification: Non-confidential Access to and distribution of this document is restricted to the persons permitted by the security classification. This document is confidential to the Association and is subject to copyright protection. This document is to be used only for the purposes for which it has been supplied and inf ormation contained in it must not be disclosed or in any other way made available, in whole or in part, to persons other t han those permitted under the security classification without the prior written approval of the Association.
Copyright Notice Copy right © 2020 GSM Association
Disclaimer The GSM Association (“Association”) makes no representation, warranty or undertaking (express or implied) with respect to and does not accept any responsibility for, and hereby disclaims liability for the accuracy or completeness or timeliness of the information contained in this document. The inf ormation contained in this document may be subject to change without prior notice.
Antitrust Notice The inf ormation contain herein is in full compliance with the GSM Association’s antitrust compliance policy.
1 Introduction
1.1 Overview
Many Machine to Machine (M2M) Devices will not be easily reachable for the purpose of Provisioning a Subscription. This document provides an architecture approach as a proposed solution for the remote Provisioning and Subscription management of Devices, while at the same time maintaining at least the same level of security both for network operators and Subscribers as present solutions. Additionally this document describes a solution to be able to locally switch to specific optionally supported Profiles, i.e. for testing/certification or for emergency cases.
1.2 Void
1.3 Scope
The aim of this document is to define a common architecture framework to enable the remote Provisioning and management of the Embedded UICC (eUICC) in Devices which are not easily reachable, and additionally a way to locally switch to specific Profiles for testing/certification or emergency cases. The adoption of this architecture framework will aim to provide a basis for ensuring global interoperability for Remote Provisioning between Operators in different deployment scenarios.
1.4 Intended Audience
Technical experts working within Operators, SIM solution providers, machine to machine Device vendors, standards organisations, network infrastructure vendors, Telecommunication Service Providers and other industry bodies.
1.5 Definition of Terms
Term Description
Physical entity (person, company or organisation) that
can assume a role in the functional architecture. It is
Actor
possible for an actor to assume multiple Roles in the
same functional architecture.
A paying party, legally responsible juridical person or
Customer
entity.
Equipment into which an Embedded UICC and a
Device communication module are inserted during assembly.
Examples include: Utility meter, car and camera.
A UICC which is not easily accessible or replaceable, is
Embedded UICC not intended to be removed or replaced in the Device,
and enables the secure changing of Subscriptions.Term Description
An Operational Profile with a Profile Attribute allocated,
indicating that this Profile is an Emergency Profile.Emergency Profile An Emergency Profile complies with regulatory
requirements and only provides the capability to make
Emergency Calls and receive calls from an Emergency
centre (e.g. Public Safety Answering Point)
This is an attribute allocated to a Profile which, when set,
Emergency Profile Attribute
identifies the Emergency Profile.
The state of a Profile when its files and/or applications
Enabled Profile (e.g., NAA) are selectable over the UICC-Terminal
interface.
A certificate issued by the EUM for a specific, individual,
eUICC Certificate eUICC.
This certificate can be verified using the EUM Certificate.
Supplier of the eUICCs and resident software (for
eUICC Manufacturer
example firmware and operating system)
Mechanism to correct existing features on an eUICC by
eUICC OS Update the original OS Manufacturer when the eUICC is in the
field.
A certificate issued to a GSMA accredited EUM which
can be used to verify eUICC Certificates.
EUM Certificate
This certificate can be verified using the GSMA CI
Certificate.
This is an attribute allocated to a Profile which, when set,
identifies the Profile to be enabled by the Fall-Back
Fall-Back Attribute Mechanism or by the execution of the Disable Profile
function on another Profile. Only one Profile on the
eUICC can have the Fall-Back attribute set at a time.
eUICC based mechanism which enables the Profile with
Fall-Back Mechanism Fall-Back Attribute set when the Enabled Profile loses
network connectivity.
Manifestation of UICC. Specified in ETSI TS 102 221 [3]
Form Factor
and ETSI TS 102 671 [8].
Profile generated by the SM-DP following the Operator’s
Generic Profile specifications, but without the Operator’s credentials and
any specific data linked to the future targeted eUICC.
Self-signed certificate of the CI, used to authenticate
GSMA CI Certificate
certificates issued to other entities.
Unique number to identify a Profile in an eUICC. The
Integrated Circuit Card ID ICCID is coded as defined by ITU-T E.118 [24]. Unique identifier owned and issued by Operators as
International Mobile Subscriber Identity
defined in 3GPP TS 23.003 [25].Term Description
A function of the interface between a Device and an
eUICC that provides the capability for a Device to locally
Local Disable
disable the Emergency Profile or the Test Profile on the
eUICC without involvement of an SM-SR and/or SM-DP.
A function of the interface between a Device and an
eUICC that provides the capability for a Device to locally
Local Enable
enable the Emergency Profile or the Test Profile on the
eUICC without involvement of an SM-SR and/or SM-DP.
A Service Provider relying on an Operator providing the
M2M Service Provider (M2M SP)
Profiles on the eUICC.
An application residing on a UICC which provides
Network Access Application authorisation to access a network for example a USIM
application.
Data required to authenticate to an ITU E.212 [16]
Network Access Credentials network. This MAY include data such as Ki/K and IMSI
stored within a NAA.
A Profile containing one or more Network Access
Applications and associated Network Access Credentials
Operational Profile
and Operator’s (e.g. STK) applications and 3rd party
applications.
A Mobile Network Operator or Mobile Virtual Network
Operator Operator; a company providing wireless cellular network
services.
Set of credentials owned by an Operator, including
Network Access Credentials, OTA Keys for remote
Operator Credentials
Profile management and authentication algorithm
parameters.
A Profile whose Policy Rules have become
Orphaned Profile unmanageable, for example due to the termination of the
Subscriber’s contract with the Operator.
The credentials included in the Profile, used in
OTA Keys
conjunction with OTA Platforms.
An Operator platform used for remote management of
OTA Platform
UICCs of Enabled Operator Profiles on eUICCs.
Un-personalised Profile with the addition of the
Personalised Profile Personalisation Data for the eUICC targeted by the
Operator.
Set of data derived from the input data provided by the
Operator and generated by the SM-DP (e.g. NAC, Keys,
Personalisation Data
etc.) and dedicated to the personalisation of a unique
Personalised Profile.Term Description
A set of functions related to the, enabling, disabling and
deletion of a Profile and the transport of Profile
Management functions to an eUICC. Platform
Platform Management Management actions are protected by Platform
Management Credentials shared between the SM-SR
and the ISD-R. Platform Management does not affect
the contents of a Profile.
Data required within an eUICC so that a secured
communication can be set up between an external entity
Platform Management Credentials and the eUICC in order to, enable, disable and delete
Profiles on the eUICC and to transport Profile
Management functions.
Principles reflected in a set of rules that governs the
Policy behaviour of eUICC and/or entities involved in the
remote management of the eUICC.
A function that defines, updates or removes Policy Rules
Policy Control Function
to implement a Policy.
A function that executes Policy Rules to implement a
Policy Enforcement Function
Policy.
Defines the atomic action of a Policy and the conditions
Policy Rule
under which it is executed.
Combination of a file structure, data and applications to
be provisioned onto, or present on, an eUICC and which
Profile
allows, when enabled, the access to a specific mobile
network infrastructure.
Description of a Profile in a format specific to the
Profile Description Operator; Example formats include Excel table, xml
format and plain text.
Execution of certain Platform Management commands
Profile Lifecycle Management by the M2M SP on a Profile, based on prior PLMA from
the Operator owning the Profile.
Authorisation given by an Operator to an M2M SP to
Profile Lifecycle Management
permit Profile Lifecycle Management. Such
Authorisation (PLMA)
authorisations are managed by the SM-SR.
A set of functions related to the downloading, installation
and content update of a Profile in a dedicated ISD-P on
Profile Management the eUICC. Download and installation are protected by
Profile Management Credentials shared between the
SM-DP and the ISD-P.
Data required within an eUICC so that a Profile
Profile Management Credentials downloaded from an external entity can be decrypted
and installed on the eUICC
The downloading and installation of a Profile into an
Provisioning
eUICC.Term Description
A Profile containing one or more Network Access
Applications, and associated Network Access
Credentials which, when installed on an eUICC, enables
Provisioning Profile
access to communication network(s), only to provide
transport capability for eUICC management and Profile
management between the eUICC and an SM-SR.
A special purpose contract, with its associated
Provisioning Profile, that enables a machine to machine
Provisioning Subscription
Device to access a mobile network only for the purpose
of management of Operational Profiles on the eUICC.
Roles Roles are representing a logical grouping of functions.
An element or set of elements within the ecosystem
sharing a common level of trust and securely managed
Security Realm
by a single administrative authority. No specific level of
trust is to be assumed.
An entity (associated with one or more users) that is
engaged in a Subscription with a Telecommunication
Service Provider. The subscriber is allowed to subscribe
Subscriber and unsubscribe to services, to register a user or a list of
users authorised to enjoy those services, and also to set
the limits relative to the use that associated users make
of these services
Describes the commercial relationship between the
Subscription Subscriber and the Telecommunication Service
Provider.
Role that prepares the Profiles to be securely
Subscription Manager Data provisioned on the eUICC and manages the secure
Preparation download and installation of these Profile onto the
eUICC
Role that securely performs functions of Platform
Subscription Manager Secure Routing Management commands and the transport of Profile
Management commands.
Entity that provides Subscriptions to Subscribers either
as part of an Operator or as a party with a wholesale
Telecommunication Service Provider agreement with an Operator. The Telecommunication
Service Provider could also be the Operator. A combination of data and applications to be provisioned
on an eUICC to provide connectivity to test equipment
Test Profile for the purpose of testing the Device and the eUICC. A
Test Profile does not allow access to an ITU-E.212 [16]
network.
Representation of the Profile (e.g. script) without any
Un-personalised Profile personalised data in a machine readable format. This
format can be processed by a targeted eUICC type.1.6 Abbreviations
Abbreviation Description
AID Application Identifier
CASD Controlling Authority Security Domain
CI Certificate Issuer
DAP Data Authentication Pattern
DPID ID of the relevant SM-DP
ECASD eUICC Certificate Authority Security Domain
ECKA Elliptic Curve Key Agreement algorithm
EID eUICC-ID
EIS eUICC Information Set
EncP Encrypted and integrity protected Personalised Profile
EPS Evolved Packet System
ETSI European Telecommunications Standards Institute
EUM eUICC Manufacturer
eUICC Embedded Universal Integrated Circuit Card
GP GlobalPlatform
GPCS GlobalPlatform Card Specification
GSMA GSM Association
ICCID Integrated Circuit Card ID
IMS IP Multimedia Subsystem
IMSI International Mobile Subscriber Identity
ISD Issuer Security Domain
ISD-P Issuer Security Domain Profile
ISD-R Issuer Security Domain Root
ISO International Standards Organisation
ITU International Telecoms Union
KDF Key Derivation Function
LTE Long Term Evolution
M2M Machine to Machine
M2M SP Machine to Machine Service Provider
MNO-SD Mobile Network Operator Security Domain
NAA Network Access Application
OTA Over The Air
PLMA Profile Lifecycle Management Authorisation
POL1 Policy Rules within the Profile
Policy Rules associated to a Profile and stored in the
POL2
relevant EIS at the SM-SR
PRF Pseudo Random FunctionAbbreviation Description SAS Security Accreditation Scheme SCP Secure Channel Protocol SD Security Domain ShS Shared Secret SIM Subscriber Identity Module SM Subscription Manager SM-DP Subscription Manager Data Preparation SM-SR Subscription Manager Secure Routing SRID ID of the relevant SM-SR SSD Supplementary Security Domain STK SIM Tool Kit TLS Transport Layer Security UMTS Universal Mobile Telecommunications Service USIM Universal Subscriber Identity Module XML Extensible Markup Language W3C World Wide Web Consortium
1.7 References
Document
Ref Number Title
[1] Void Void
[2] Void Void
UICC-Terminal interface; Physical and logical
[3] ETSI TS 102 221
characteristics
Administrative commands for telecommunications
[4] ETSI TS 102 222
applications
[5] ETSI TS 102 223 Smart Cards; Card Application Toolkit (CAT)
[6] ETSI TS 102 225 Secured packet structure for UICC based applications
[7] ETSI TS 102 226 Remote APDU structure for UICC based applications
Smart cards; Machine to Machine UICC; Physical and
[8] ETSI TS 102 671
logical characteristics
[9] Void Void
[10] GlobalPlatform Card Specification v.2.2.1
GlobalPlatform Card Specification v.2.2.1 UICC
[11]
Configuration v1.0.1
GlobalPlatform Card Specification v.2.2 Amendment A:
[12]
Confidential Card Content Management, v1.0.1
GlobalPlatform Card Specification v.2.2 Amendment B:
[13]
v1.0.1 Document
Ref Number Title
GlobalPlatform Card Specification v.2.2 Amendment D:
[14]
Secure Channel Protocol 03, v1.1
GlobalPlatform Card Specification v.2.2 Amendment E:
[15]
Security Upgrade for Card Content Management v1.0
The international identification plan for public networks
[16] ITU E.212
and Subscriptions
[17] 3GPP TS 21.133 3G Security, Security Threats and Requirements
Characteristics of the Universal Subscriber Identity
[18] 3GPP TS 31.102
Module (USIM) application
Characteristics of the IP Multimedia Services Identity
[19] 3GPP TS 31.103
Module (ISIM) application
NIST SP 800-57 Part NIST Special Publication 800-57: Recommendation for
[20]
1 Key Management – Part 1: General (Revision 3)
Key words for use in RFCs to Indicate Requirement
[21] RFC 2119 Levels, S. Bradner
http://www.ietf.org/rfc/rfc2119.txt
FS.08 – Security Accreditation Scheme for Subscription
[22] FS.08
Manager - Standard v3
FS.04 - Security Accreditation Scheme for UICC
[23] FS.04
Production – Standard v8
The international telecommunication charge card
[24] ITU-T E.118 Digital cellular telecommunications system (Phase 2+);
[25] 3GPP TS 23.003 Universal Mobile Telecommunications System (UMTS);
Numbering, addressing and identification[26] SGP.14 GSMA eUICC PKI Certificate Policy Version 1.1
[27] SGP.05 Embedded UICC Protection Profile Version 1.1
Common test environments for User Equipment (UE);
[28] 3GPP TS 34.108
Conformance testing1.8 Conventions
The key words "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", and "MAY" in this document SHALL be interpreted as described in RFC 2119 [2119].
2 Basic Principles and Assumptions
This section contains the principles and assumptions related to the GSMA remote Provisioning system for Embedded UICC.
2.1 Basic Principles
BPR1 The solution SHALL reflect the most important UICC-related use cases and
adequately support them in a context where the eUICC hardware is not easily
accessible or removable from the machine to machine Device. It is possible, due to
the different nature of the eUICC, that not all current use cases can be covered.
BPR2 The solution SHALL be designed to enable new business opportunities, e.g. in M2M
segments, while keeping the proven benefits of the current UICC.
BPR3 The security of the eUICC and its overall management processes must at all times
and under all circumstances be at least as good as with the current removable UICC
and its Provisioning processes.
BPR4 Any function, feature or service which is possible on a current UICC SHALL be
possible on the eUICC.
BPR5 The access to functions, features or services on the eUICC SHALL be identical to
the current UICC, i.e. transparent for the terminal and the user.
BPR6 The remote management of functions, features or services on the eUICC SHALL
have minimal impact on the operator’s existing systems and infrastructure. This
SHALL be achieved by using existing standards and specifications as far as
possible.
BPR7 Keep it simple. Complexity is understood as a risk factor. A reasonably limited
functional approach will support the time-to-market expectations and MAY evolve
with future requirements and improvements.
BPR8 3rd-party applications which are outside of an Operational Profile are out of the scope
of this document.
BPR9 Each entity SHALL be responsible for its operations.
BPR10 The applications and file system within a disabled Operational Profile are neither
locally or remotely selectable.2.2 General Assumptions
2.2.1 Use of Existing Standards
STD1 The definition of the eUICC and the related Provisioning systems SHALL be as
efficient as possible, in terms of efforts and costs for all involved parties. This SHALL
be achieved by using existing standards and specifications where possible.
STD2 GlobalPlatform specifications will be considered as a framework of choice for the
implementation of the eUICC.2.2.2 Machine to Machine Device Impact
DEV1 The implementation of the eUICC ecosystem will have minimal impact on the Device.
DEV2 No security certification requirement will be placed on the Device.
DEV3 No new certification requirement will be placed on the Device.
DEV4 Any Device approval impact SHALL be covered under existing Device type approval
or certification schemes and be independent of the certification of the eUICC.
DEV5 The communication module within the Device SHALL conform to the terminal
requirements within ETSI TS 102 221 [13] for all standardised ETSI Form Factors.DEV6 The Device manufacturer SHALL ensure that there is a method for the owner of the
Device or Telecommunication Service Provider to access the eUICC identification
(EID).
DEV7 The Device manufacturer SHOULD print the eUICC identification (EID) on the Device
so that it is human readable.2.2.3 Security
SEC1 The overall security of the eUICC in combination with the related management
processes must at all time and under all circumstances be at least equivalent to the
current removable UICC and its Provisioning processes.
SEC2 The architecture of the eUICC and its remote Provisioning system complies with the
requirements of 3GPP TS 21.133 [17] “3G Security, Security Threats and
Requirements”.
SEC3 The architecture must support a level of security with respect to protection of Operator
Credentials which is at least equal to present levels of security. This applies in
particular to:
The confidentiality of cryptographic keys and authentication parameters.
The integrity of Subscriber identities (e.g. IMSI).
SEC4 Certification SHALL be mandatory for the eUICC.
SEC5 The remote Provisioning architecture must avoid compromising the security of
Subscriber data.
SEC6 A trusted system is a system that is relied upon to a specified extent to enforce a
specified security Policy. A trust model is defined as part of the security related project
deliverables.
SEC7 For remote Platform and Profile management, all entities involved in the management
have to be mutually authenticated.2.2.4 Regulatory
REG1 Regulatory issues are considered outside the scope of the Embedded SIMworking
group. Regulatory issues will be referred to the GSMA regulatory team.2.3 The eUICC Ecosystem
ECO1 Remote subscription management functions are provided by two Roles – the SM-DP
and the SM-SR.
ECO2 1. Profile management is governed by Policy Rules that are contained in the
Operator’s Profile and in the SM-SR.
2. Policy Rules are enforced by the eUICC and the SM-SR on behalf of the Operator.
3. Control of Policy Rules lies with the Operators.2.3.1 Roles and Entities
2.3.1.1 eUICC Manufacturer
MAN1 1. The eUICC Manufacturer (EUM) provides eUICCs containing a Provisioning Profile
and/or one or more Operational Profiles.
2. The eUICCs are delivered to the machine to machine Device manufacturer.
3. Related Platform Management Credentials are sent to the SM-SR to be associated
with each eUICC.
4. The EUM is responsible for the initial cryptographic configuration and security
architecture of the eUICC.
5. The EUM production site SHALL be SAS-UP [23] certified.
6. The eUICC manufacturer MAY also provide eUICCs containing an Emergency
Profile.
7. The eUICC Manufacturer MAY provide eUICCs also containing a Test Profile.
EUM.MAN2 The EUM SHALL issue the eUICC Certificate to allow:
the eUICC authentication and certification to other entities;
the authenticated keyset establishment between an SM-DP and an eUICC;
the authenticated keyset establishment between an SM-SR and an eUICC.MAN3 The EUM Certificate and GSMA CI Certificate SHALL be delivered to other entities
using reliable storage and communication channels.
MAN4 The EUM SHALL provide services, tools, scripts or documentation to the SM-DP
enabling it to create an Un-personalised Profile for a eUICC produced by the EUM. It is
not the role of the EUM to create the Un-Personalised Profile on behalf of the SM-DP.
MAN5 In case the eUICC OS Update mechanism is used, the EUM SHALL ensure the eUICC
affected by such mechanism maintains the same level of security and functional
compliance.2.3.1.2 Device Manufacturer
DMA1 1. The Device manufacturer builds machine to machine Devices which comprise a
communication module and an eUICC containing at least a Provisioning Profile or
Operational Profile that is enabled.
2. A Provisioning Profile or Operational Profile SHALL be enabled.
NOTE: Any Enabled Profile requires the agreement of the respective Operator.2.3.1.3 Operator
MNO1 1. The Operator provides mobile network connectivity.
2. The Operator selects at least one SM-DP.
3. The Operator SHALL have a direct interface to the SM-SR.
4. In the event that a Subscriber has selected an Operator, that Operator initiates the
download of a particular Profile to an identified target eUICC subject to current
Policy Rules.
5. The Operator specifies the Profile characteristics and any features and
applications, analogous to current UICCs. The Operator owns the Profile.
6. Profiles can be generated at the time the download is ordered.
7. To achieve a transparent fit with existing UICC processes and interfaces, Profiles
can also be ordered in bulk, then securely stored at the SM-DP until ordered for
download. SAS-SM [22] requirements SHALL apply.
8. The Operator defines the Policy Rules that control the Profile management when
this Profile is enabled.
9. After the download is ordered the Operator SHALL be able to check and validate
the certification and capabilities (manufacturer, memory size, algorithms etc.) of the
target eUICC before the download of the Profile is started.
10. The Operator SHALL receive confirmation of the successfully completed download
and installation of the Profile.
11. The enabled Operator SHALL be able to use an OTA Platform in order to manage
the content of its enabled Profile in the eUICC.MNO2 Upon request from a Subscriber the Operator SHALL be able to declare to the relevant
entities a machine to machine Device as stolen so that appropriate measures can be
taken.MNO3 An Operator SHOULD provide only limited service to a Device using a Provisioning
Profile; the mechanism the Operator uses to enforce this limited service is out of scope
of this architecture.MNO4 An Operator SHALL be able to send Platform Management commands and Profile
Management commands to manage its own Profiles
either to an SM-DP to be transmitted to an SM-SR
either directly to an SM-SR
These commands SHALL be executed only if the targeted Profile is owned by the
Operator.MNO5 The Operator SHALL be able to receive reports of a Profile status changes of its own
Profiles, irrespective of the cause of the Profile status change.
MNO6 An Operator SHALL be able to define PLMAs for its own Profiles. No other entity than
the Operator SHALL be able to define PLMA.
MNO7 The Operator SHALL be able to set and unset PLMAs whereby the M2M SP SHALL be
able to receive a report about this change of authorisation.MNO8 An Operator SHALL be able to grant PLMA to an M2M SP for:
Commands to enable, disable, delete a Profile.
Management (set or unset) of the Fall-Back Attribute of a Profile.
Management (set or unset) of the Emergency Profile Attribute of a Profile.
The reception of reports related to enabling, disabling, deleting, and
management of the Fall-Back Attribute of a Profile.
The reception of reports related to management of the Emergency Profile
Attribute of a Profile.
MNO9 MNO4 SHALL be independent of any given PLMA to an M2M SP.MNO10 An Operator SHALL be able to request to an SM-SR,
the setting of the Fall-Back Attribute on its Profile,
the setting of the Emergency Profile Attribute on its Profile if another Profile has
the Emergency Profile Attribute set,
if and only if the appropriate PLMA have been set by the Operator owning the Profile
with the Fall-Back Attribute or the Profile with the Emergency Profile Attribute to be
unset.
MNO11 An Operator SHALL be able to send Profile Lifecycle Management commands to
enable, disable and delete Profiles, targeting its own Profiles, issued by an M2M SP on
an M2M SP/Operator interface.
The Operator SHALL be able to send these commands
either to an SM-DP to be transmitted to an SM-SR
either directly to an SM-SR.
These commands SHALL be executed only if the targeted Profile is owned by the
Operator and PLMA has been set by the Operator owning the Profile , for the M2M SP.MNO12 The Operator SHALL be able to route Profile change status reports to the M2M SP that
is authorised on this Profile when M2M SP is using an Operator/M2M SP interface as
specified in MNO11.MNO13 The Operator SHALL be able to receive a report of setting the Emergency Profile
Attribute of any Profile on the eUICC.NOTE:The Operator MAY provide an interface to the M2M SP in order to allow the M2M SP to trigger Profile installation or perform Profile Lifecycle Management related to the Operator’s Profiles. This interface is out of scope of this specification.
2.3.1.4 Operator Subscriber
CUS1 1. The Operator Subscriber is the actual contract partner of the Operator for the
Subscription. It MAY not be identical to the end user.
2. The Operator Subscriber uses a Device equipped with a eUICC from the Device
manufacturer and a Profile (Subscription) from a selected Operator.
3. Prior to the download of a Profile the Operator Subscriber must provide his/her
implicit or explicit acceptance.
4. The Operator Subscriber SHALL have means to directly or indirectly obtain the
machine to machine Device identifier. The identification of the machine to machine
Device SHALL implicitly or explicitly identify the eUICC.2.3.1.5 End User
END1 1. The end user uses the machine to machine Device and the services related to the
Enabled Profile.
2. The end user MAY be identical to the Operator Subscriber.
3. The eUICC is transparent to the end user.
4. The end user’s relationship is with an Operator Subscriber or the Operator directly.2.3.1.6 Subscription Manager – Data Preparation (SM-DP)
SMDP1 1. The SM-DP acts on behalf of the Operator.
2. The SM-DP receives a Profile Description from the Operator and creates Un-
personalised Profile accordingly. The SM-DP MAY have to utilise tools provided
by the EUM to create the Un-personalised Profile. The information exchanged
between the SM-DP and EUM is not standardised and MAY differ between
different entities.
3. The SM-DP generates Personalisation Data for the targeted eUICC (e.g. Network
Access Credentials and other data) based upon input data from the Operator.
4. The SM-DP builds Personalised Profiles for the targeted eUICC.
5. The SM-DP SHALL secure the Profile package with the Profile Management
Credentials of the targeted eUICC.
6. The SM-DP installs the Personalised Profile on the eUICC through the SM-SR.SMDP2 On request by the Operator the SM-DP also initiates Profile enabling, Profile disabling,
Profile deletion and Fall-Back/Emergency Profile Attribute management requests to
the eUICC via the SM-SR.SMDP3 The SM-DP establishes a secure and authenticated channel to the eUICC to download
and install Profiles on to the eUICC.SMDP4 The interface between the SM-DP and the SM-SR SHALL have proper security level
defined in order to support secure delivery of Profiles through the SM-SR.SMDP5 The SM-DP must always receive a request from an Operator to send a Profile via an
SM-SR to an eUICC.SMDP6 The SM-DP SHALL be GSMA SAS-SM [22] certified.
SMDP7 Given any eUICC, the SM-DP SHALL be able to generate a Personalised Profile for
this eUICC.
SMDP8 The SM-DP and Operator are the only entities allowed to establish a secure and
authenticated channel to the eUICC to manage a Profile.
SMDP9 The Operator SHALL be able to interface to an SM-DP of the Operator’s choosing to
serve any Operator approved eUICC.
SMDP10 The SM-DP SHALL be able to generate a Personalised Profile that can be downloaded
and installed on the eUICC targeted by the Operator.
SMDP11 The SM-DP SHALL support the Profile ordering procedure described in section 3.5.3
of this document.SMDP12 The SM-DP SHALL be able to forward to the corresponding Operator any status
change, including Attribute changes, of a Profile reported by the SM-SR to the SM-DP
independently of the cause of the Profile change.SMDP13 The SM-DP certificate SHALL be issued by a GSMA CI.
SMDP14 The SM-DP SHALL authenticate the Operator before executing Profile Management
or forwarding Platform Management commands from this Operator to the SM-SR.SMDP15 On request by the Operator the SM-DP SHALL be able to set, delete or retrieve PLMA
in an SM-SR managing the Operator PLMA, as described in section 3.5.15.SMDP16 The SM-DP SHALL be able to forward to the corresponding Operator the setting of the
Emergency Profile Attribute for any Profile on the eUICC reported by the SM-SR.2.3.1.7 Subscription Manager – Secure Routing (SM-SR)
SMSR1 The SM-SR is the only entity allowed to establish a secure and authenticated transport
channel to the eUICC to manage the eUICC platform.SMSR2 The SM-SR loads, enables, disables and deletes Profiles on the eUICC in accordance
with the Operator’s Policy Rules and PLMAs.SMSR3 The SM-SR obtains the Platform Management Credentials of the eUICC from the EUM
or establishes them through the previous SM-SR.SMSR4 Only one SM-SR can be associated with an eUICC at any point in time, but it can be
changed during the lifetime of the eUICC.SMSR5 The interface between the SM-SR and the eUICC SHALL have proper security level
defined in order to support the secure delivery to, and management of, Profiles in the
eUICC.SMSR6 1. The SM-SR SHALL NOT handle Operator Credentials in clear text.
2. The SM-SR has secure communications channels to the SM-DP, eUICC, Operator
and M2M SP.
3. The SM-SR SHALL be GSMA SAS-SM [22]- certified.SMSR7 The SM-SR SHALL be able to determine whether an eUICC is available for remote
management.SMSR8 The SM-SR SHALL be non-discriminatory with regards to other entities within the
ecosystem.SMSR9 The SM-SR certificate SHALL be issued by a GSMA CI.
SMSR10 The SM-SR SHALL support Profile Lifecycle Management. through an interface with an
M2M SP.SMSR11 The SM-SR SHALL support the PLMA function through an interface with an Operator
as described in section 3.5.15.SMSR12 The SM-SR SHALL authenticate the Operator and check that the Operator is the owner
of the Profile before executing Platform Management commands.SMSR13 The SM-SR SHALL authenticate the M2M SP and check that the M2M SP is authorised
by the Operator through PLMA before executing Profile Lifecycle Management on the
Profile owned by the Operator who has given the PLMA.
If no PLMA is given, only the Operator is able to execute Platform Management on its
Profiles.SMSR14 The SM-SR SHALL be able to report any status change of a Profile, to
1. a corresponding Operator owning the affected Profile and interfacing with the
SM-SR
or
2. an M2M SP having PLMA set for the affected Profile and interfacing with the
SM-SR
or
3. a corresponding SM-DP being in charge of the affected Profile and interfacing
with the SM-SRThis SHALL be independent of the cause of the Profile change and SHALL also cover the case where the Operator acts on behalf of the M2M SP as described in MNO11.
SMSR15 In case of SM-SR change, no PLMA SHALL be transferred to the new SM-SR.
SMSR16 The SM-SR SHALL ensure no PLMAs are granted for:
The setting of POL2
The setting of other PLMAs2.3.1.8 Certificate Issuer
The Certificate Issuer role issues certificates for Embedded UICC remote provisioning
CIS1
system entities and acts as a trusted third party for the purpose of authentication of
the entities of the system.
The Certificate Issuer provides certificates for the EUM, SM-SR and SM-DP.
CIS2CIS3 The Certificate Issuer communicates with the SM-SR, SM-DP and EUM through
interfaces that are defined in SGP.14 [26].2.3.1.9 Initiator
The Initiator is a virtual role that can be assumed by various entities. The Initiator is in
INT1
charge of initiating specific procedures.
For the purpose of the procedures defined within this document the Initiator MAY be
INT2
assumed to be an Operator or an M2M SP, having PLMAs set for the affected
Operator Profiles.INT3 At any time, only one entity MAY assume the Initiator role.
INT4 The interface between the Initiator and the SM-SR is based on the interfaces defined in
this document.INT5 The Initiator SHALL be authorised and authenticated by the SM-SR.
2.3.1.10 M2M Service Provider
An M2M SP MAY have a direct interface to the SM-SR to perform Profile
M2MSP1
Lifecycle Management for which PLMAs have been set by the Operator.
An M2M SP SHALL be able to request to an SM-SR the enabling of a Profile
M2MSP2
for which PLMAs have been set by the Operator.
An M2M SP SHALL be able to request to an SM-SR the disabling of a Profile
M2MSP3
for which PLMAs have been set by the Operator.
An M2M SP SHALL be able to request to an SM-SR the deletion of a Profile
M2MSP4
for which PLMAs have been set by the Operator.
An M2M SP SHALL be able to request to an SM-SR the setting of the Fall-
M2MSP4-B
Back Attribute on a Profile, if and only if the appropriate PLMA has been set
by both the Operator whose Profile has the Fall-Back Attribute currently set,
and the Operator whose Profile will have the Fall-Back Attribute set by the
request.
A M2M SP SHALL be able to request to an SM-SR the setting of the
M2MSP4-C
Emergency Profile Attribute on a Profile, if and only if the appropriate PLMA
has been set by the Operator whose Profile will have the Emergency Profile
Attribute set by the request.
In case a Profile exists that already has the Emergency Profile Attribute set,
an M2M SP SHALL be able to request to an SM-SR the setting of the
Emergency Profile Attribute on a Profile, if and only if the appropriate PLMAs
have been set by both, the Operator whose Profile has the Emergency Profile
Attribute currently set, and the Operator whose Profile will have the
Emergency Profile Attribute set by the request.M2MSP5 The M2M SP SHALL be able to receive reports of a Profile enabling, disabling,
or deletion and Fall-Back or Emergency Profile Attribute change, based on a
Platform Management command executed by an SM-SR, irrespective of the
cause of the changes to the Profile.M2MSP6 The M2M SP SHALL be able to receive reports whenever its PLMAs have been
changed.M2MSP7 The reception of reports in M2MSP5 SHALL be configured via PLMAs.
2.4 The eUICC
EUICC1 The eUICC is a discrete hardware component in a standardised ETSI Form Factor.
EUICC2 In general, the eUICC is non-removable.
EUICC3 From a machine to machine Device perspective, the behaviour of the eUICC is
generally identical to the UICC.EUICC4 1. The eUICC can contain one or more Profiles.
2. Only one Profile SHALL be enabled at any point in time.
3. Void.
4. Void.
5. Void.
6. All relevant UICC specifications SHALL apply.EUICC4- The eUICC SHALL contain a Profile with Fall-Back Attribute set.
B
The eUICC SHALL NOT contain more than one Profile with the Fall-Back Attribute set.
The Profile with Fall-Back Attribute set SHALL NOT be deleted.
The setting of the Fall-Back Attribute SHALL be managed by the SM-SR.EUICC4- The eUICC MAY contain a Profile with Emergency Profile Attribute set.
C
The eUICC SHALL NOT contain more than one Profile with the Emergency Profile
Attribute set.
A Profile SHALL NOT have the Emergency Profile attribute and the Fall-Back attribute
set at the same time.
The setting of the Emergency Profile Attribute SHALL be managed by the SM-SR.EUICC4- The eUICC MAY contain a Test Profile.
D
The eUICC SHALL NOT contain more than one Test Profile.
The eUICC SHALL ensure that the Test Profile does not have the Fall-Back Attribute
set or the Emergency Profile Attribute set.EUICC4- The eUICC SHALL ensure that the Profile Attribute requirements described in 2.5 are E fulfilled.
EUICC5 The behaviour of a (U)SIM or ISIM within a Profile on an eUICC is expected to be
identical to a present (U)SIM or ISIM. No changes to existing 3GPP (U)SIM and ISIM
specifications are expected.EUICC6 The eUICC SHALL implement the Milenage network authentication algorithm.
EUICC7 The eUICC SHOULD implement the TUAK algorithm in addition to Milenage when
TUAK is included within 3GPP specifications.EUICC8 The ownership of the physical eUICC MAY change throughout its lifetime.
EUICC9 The eUICC SHALL contain the address of its associated SM-SR and have a means to
authenticate it.EUICC10 eUICCs delivered by the EUM SHALL always be registered to an SM-SR.
EUICC11 If any command, such as Profile enabling, Profile disabling and Profile download and
installation does not complete successfully, the eUICC SHALL maintain the state it was
in before it received the request.EUICC12 The eUICC MAY support Local Enable and Local Disable functions of an Emergency
Profile without interaction with the SM-SR.EUICC12- The eUICC MAY support Local Enable and Local Disable functions of a Test Profile B without interaction with the SM-SR.
EUICC13 The eUICC SHALL NOT send a report to the SM-SR when an Emergency Profile has
been enabled using the Local Enable function.EUICC14 The eUICC SHALL enable the previously enabled Profile when the Emergency Profile
has been disabled using the Local Disable function.EUICC15 When an Emergency Profile has been disabled using the Local Disable function the
eUICC MAY send a report to the SM-SR.EUICC16 The eUICC supporting Local Enable and Local Disable SHALL allow these functions
only for the Emergency Profile.EUICC17 In case the execution of the Local Disable fails (e.g. previously enabled Profile deleted,
previously enabled Profile not providing network connectivity), the eUICC SHALL trigger
the Fall-Back Mechanism.EUICC18 The eUICC MAY support Local Enable and Local Disable functions for a Test Profile
without interaction with the SM-SR.EUICC19 The eUICC SHALL NOT send a report to the SM-SR when the Test Profile has been
enabled using the Local Enable function.EUICC20 The eUICC SHALL enable the previously enabled Profile when the Test Profile has
been disabled using the Local Disable function.EUICC21 When a Test Profile has been disabled using the Local Disable function the eUICC MAY
send a report to the SM-SR.EUICC22 In case the execution of the Local Disable fails (e.g. previously enabled Profile deleted,
previously enabled Profile not providing network connectivity), the eUICC SHALL trigger
the Fall-Back Mechanism.EUICC23 The eUICC SHALL perform the necessary action to ensure that the values of the Test
Profile are in accordance with 3GPP TS 34.108 [28] and to ensure that the Test Profile
does not allow access to an ITU-E.212 [16] network.EUICC24 In case the execution of the Local Disable fails, the eUICC triggering the Fall-Back
Mechanism SHALL ensure that the previously enabled Profile is the Profile that was
enabled before the Local Enable.
The eUICC MAY support Java Card™.
EUICC25
Note: eUICCs according to SGP.02 versions 2.1, 3.1, and 3.2 that are
certified, support Java Card™.2.4.1 Profiles
PRO1 Profiles are the property of the issuing Operator.
PRO2 Profiles SHALL be uniquely identified.
PRO3 1. Only one Profile SHALL be enabled at any point in time.
2. Other Profiles MAY exist on the Embedded UICC, but the Enabling/Disabling of
Profiles, except an Emergency Profile and a Test Profile, always remains an
action that is executed only by the SM-SR acting on behalf of the Operator, except
under specific circumstances described by PRO11 or by an M2M SP based on
PLMAs set by the Operator.
3. Enable/Disable/Delete actions SHALL be undertaken according to Policy Rules.PRO4 1. A Profile is under the control of the issuing Operator. The Operator MAY delegate
part of the Profile Lifecycle Management via PLMAs.
2. A Profile in combination with a eUICC carries all logical characteristics of a UICC.
All relevant UICC specifications SHALL apply with the exceptions defined by the
eUICC specifications.PRO5 Each Profile SHALL be isolated within its own dedicated secure container. The
GlobalPlatform’s Security Domain framework SHALL be considered.PRO6 Profiles MAY be used either for Provisioning (Provisioning Profile), for operation
(Operational Profile) or for testing (Test Profile). They are clearly distinguished.
1. An Operational Profile MAY be used as a Provisioning Profile.
2. A Provisioning Profile SHALL NOT be used as an Operational Profile.
3. A Test Profile SHALL NOT be used as a Provisioning or Operational Profile.PRO7 There SHALL be zero or one Provisioning Profile.
PRO8 There MAY be several Operational Profiles.
PRO9 Installed Profiles SHALL have one of the following states:
enabled
disabledPRO10 In all operational uses the eUICC SHALL enforce that one, and only one, Profile is
enabled at any point in time.PRO11 There SHALL be a capability for eUICC–initiated enabling of the Profile with Fall-Back
Attribute set, in the case of loss of network connectivity. In case this mechanism is
used, the POL1 “disabled not allowed” and “Profile deletion is mandatory when it is
disabled” SHALL be ignored.PRO11-B In case a Profile with Fall-Back Attribute set is enabled by the eUICC as per PRO11,
the eUICC SHALL inform its associated SM-SR. The Profile with Fall-Back Attribute
set will consequently provide network connectivity to allow the SM-SR to remotely
manage the eUICC.PRO12 The local Profile management SHALL only be possible:
Under specific circumstances described by PRO11
For Emergency Profile
For Test ProfilePRO13 A Profile contains parameters for an authentication algorithm (e.g. OPc, ri, ci for the
Milenage algorithm) but not the algorithm itself.PRO14 The eUICC MAY support other network authentication algorithms; if such algorithms
are supported, the eUICC SHALL implement a mechanism to configure its
parameters.
NOTE: The accessibility of these other network authentication algorithms to
Profiles is out of the scope of this document.PRO15 A Profile contains a subset of Policy Rules to control external Profile management
actions.PRO16 A Profile MAY contain identifiers for entities in the ecosystem, keys, PINs, certificates,
algorithm parameters, as well as first and second level applications. (Ref: ETSI TS
102 221 [3]).PRO17 Any function, feature or service which is possible on a current UICC SHALL be
possible in an Operational Profile on an eUICC.PRO18 The access to functions, features or services in a Profile on an eUICC SHALL be
identical to the current UICC, i.e. transparent for the terminal and the user.PRO19 The remote management of functions, features or services in a Profile on an eUICC
SHALL have minimal impact on the operator’s existing systems and infrastructure.PRO20 Profiles are stored only in the SM-DP and installed on the eUICC; they are not stored
anywhere else and are encrypted in transit.PRO21 It SHALL be possible to update a Test Profile with restriction defined by the EUICC23.
PRO22 The deletion of the Test Profile SHALL NOT be possible.
PRO23 It SHALL NOT be possible to remotely enable or disable the Test Profile.
2.4.2 Policies & Policy Control
PPC1 Each Profile has an associated Policy. A Policy contains rules which govern the change
of operational states of the Profile. These state transitions are:
disabling
enabling
deletionPPC2 Update-access to a Profile’s Policy is restricted to the issuing Operator.
PPC3 The Policy Rules of a disabled Profile can only apply to itself. The Policy Rules of a
disabled Profile cannot affect any other Profile, except for the reasons listed by PPC4.PPC4 If the previously Enabled Profile has the POL1 rule “disable not allowed” set, then the
eUICC SHALL only switch back to this Profile: as long as POL1 rule “disable not
allowed” is set, it SHALL only be possible to delete this Profile by the Master Delete
function.2.5 Profile Attributes
In this version of the specification the following Profile Attributes are defined:
- Fall-Back Attribute - Emergency Profile Attribute
PRA1 A Profile Attribute MAY be set for a Profile.
PRA2 The support of the Emergency Profile Attribute is optional.
PRA3 If a specific Profile Attribute is supported, it SHALL be possible to set such Profile
Attribute for a Profile.PRA4 A Profile SHALL NOT have the Fall-Back Attribute and the Emergency Profile
Attribute set at the same time.3 Architecture
3.1 Architecture Diagram
This section defines the functional architecture required to support the remote Provisioning of eUICCs. The basic building blocks of the architecture consist of the functions to be performed, the Roles and the assigned Actors. The figure below represents the eUICC remote Provisioning system. Details of the Roles, the associated functions and interfaces are described in section 3.3 and Annex A.
CI SM-DP Operator
EUM SM-SR M2M SP
SM-SR eUICC Device
Interfaces in Scope CI interfaces
Out Of Scope (Partially defined) Out of Scope
Figure 1: eUICC Remote Provisioning System
3.2 Card Architecture
3.2.1 Security Domains
GlobalPlatform provides the notion of Security Domains (SD). These are on -card representatives of off-card entities that provide: Secure storage for cryptographic keys; Access for off card entities using (GP) secure channel protocols; A mechanism for loading applications; Security services for applications.
The properties of SDs are configured via GP privileges (e.g. Delegated or Aut horised
Management, DAP Verification, Token Management, Global Delete), by the Provisioning of
keys (e.g. for SCP03 or SCP80/81) and by associating an SD to another SD with other rights,
by associating an SD to itself (and thus removing all management righ ts of a superior SD) or
by assigning memory quotas for the SD and all its contents.
In earlier versions, the ISD (Issuer Security Domain) had several unique privileges. However,
in the latest GlobalPlatform Card Specification [10], it is also configured via privileges, and
except for being there in the beginning, no major specific feature remains. This SHOULD
allow Operators to have the same benefits as they do today with the current ISD in a UICC.
The way forward is:
To build the eUICC on a structure of SDs, and
To define additional properties (e.g. via privileges) so that the different SDs can
represent the Actors for the various Roles in remote Provisioning of Profiles.3.2.2 Card Architecture
This section describes how Profiles SHOULD be designed, for example, using an extended version of the concepts and information models from GlobalPlatform Card Specification [ 10]. Profiles are contained within security domains (SD) on the eUICC, thus making the security mechanisms of SDs available. Further information can be found in [10]. The following figure outlines a schematic representation of the eUICC.
Figure 2:Schematic Representation of the eUICC
The operating system (OS) contains the basic platform features, e.g. support of the features defined in the GlobalPlatform Card Specification [10]. The ECASD (eUICC Certificate Authority Security Domain): Is created within an eUICC at time of manufacturing; Cannot be deleted or disabled after delivery;
Is based on the concept of CASD from Global Platform (see [10], [12] and [15]);
Is configured by the EUM at pre-issuance;
Contains a non-modifiable eUICC private key, the associated Certificate, the CI’s
root public keys and the EUM keyset for key/certificate renewal;
Is associated to the ISD-R, which provides the underlying secure OTA channel;
Is required for, and is not limited to, the establishment of new keysets in the ISD-P(s)
and ISD-R;
Does not support the Mandated DAP verification feature.ISD-R and ISD-P are security domains with special features.
The ISD-R (ISD-Root) is the on-card representative of the SM-SR that executes the Platform
Management commands (see the functions for Platform Management in section 3.3.1.3).
An ISD-R SHALL:
a) Be created within an eUICC at time of manufacturing;
b) Be associated to an SM-SR;
c) Not be deleted or disabled;
d) Provides a secure OTA channel using Platform Management Credentials
(SCP80 or SCP81 as defined in [10]) to the SM-SR;
e) Implement a key establishment protocol for the support of the change of SM-SR;
f) Offers wrapping and unwrapping service of the transport part during Profile
download;
g) Be able to create new ISD-Ps with the required cumulative granted memory
(CGM)
NOTE: memory management at SM-SR level is for further study;
h) Not be able to create any SD except an ISD-P;
i) Executes Platform Management functions in accordance to the Policy Rules;
j) Not be able to perform any operation inside an ISD-P.The ISD-P (ISD-Profile) is the on-card representative of the Operator, or SM-DP if delegated
by the Operator.
An ISD-P SHALL:
a) Be a separate and independent entity on the eUICC;
b) Contain a Profile including MNO-SD, Connectivity Parameters, file system, NAAs
and Policy Rules;
c) Contain a state machine related to creating, enabling and disabling the Profile;
d) Contain keys for Profile management for the loading and installation phase;
e) Implement a key establishment protocol to generate a keyset for the
personalisation of the ISD-P;
f) Be able to receive and decrypt, load and install the Profile created by the SM-
DP;
g) Be able to set its own state to disabled once the Profile is installed;
h) Provide SCP03 capabilities to secure its communication with the SM-DP;
i) Be able to contain a CASD. This CASD is optional within the Profile and provides
services only to security domains of the Profile and only when the Profile is in
Enabled state.
The MNO-SD is the on-card representative of the Operator.
An MNO-SD SHALL:j)Be associated to itself; k) Contain the Operator OTA Keys; l) Provide a secure OTA channel (SCP80 or SCP81 as defined in [6] and [7]); m) Have the capability to host Supplementary Security Domains. Once the Profile is installed in its ISD-P on the eUICC, the Profile and ISD-P SHALL be considered to be in union and thereafter it is the state of the ISD-P that is managed. The SM-DP performs the Profile Management functions (see section 3.3.1.2) on the ISD-P during the load and install phase. The MNO-SD is managed by an Operator OTA Platform once the Profile is enabled. The MNO-SD is managed in an equivalent way to the ISD of a current UICC. The Platform Service Manager is an OS service that offers Platform management functions and Policy Rules enforcement mechanism (Policy Rules Enforcer). Called by the ISD-R or ISD-P it executes the functions according to the Policy Rules (see section 3.6). In addition it can retrieve ISD-P generic information (i.e. Profile ID, Profile State) that can be shared with authorised entities on request. The Telecom Framework is an OS service that provides standardised network authentication algorithms to the NAAs hosted in the ISD-Ps. Furthermore it provides the capabilities to configure the algorithm with the needed parameters. Contained in the ISD-P are the well-known card structure with applications, SDs for other entities, the file system (MF tree, ADFs, etc.) (as per ETSI TS 102 221 [3] and 3GPP TS 31 102 [18]) and the Policy Rules.
3.2.3 State Diagram for an ISD-P
The states and state transitions for an ISD-P are as follows: After an ISD-P is created and keys are set up, the SM-DP, on behalf of the Operator, can create a Profile containing SDs, applications, NAAs, and the file system. When the Profile is installed, the SM-DP sets the state of the ISD-P to disabled, effectively handing it over to the SM-SR for Platform Management.
by SM-SR
created disabled deleted by SM-SR by SM -DP by SM -SR
by SM - SR
enabled
Download and installation Phase Operational Phase
Figure 3: ISD-P State Diagram
In the created state shown in the diagram above, the Profile is downloaded and installed in the ISD-P. In the created, disabled or deleted state, the Profile is not visible to the machine to machine Device.
3.3 Relevant Roles and Functions
This section introduces and defines the relevant Roles and functions needed to s upport the remote Provisioning of Embedded UICCs. The functions describe what actions are either performed internally by the role, or what actions are performed when communicating with another role or entity of the architecture. The role is agnostic to the business Actor to which this role is assigned.
3.3.1 Functions Definition
3.3.1.1 Functions for Data Preparation
3.3.1.1.1 Un-personalised Profile Creation
Un-personalised Profile Creation covers the building of the Un-personalised Profile based on the Operator’s Profile Description and the type of eUICC targeted. The SM-DP generates the Un-personalised Profile using the documentation provided by the Operator. It is assumed the SM-DP tests the Un-personalised Profile with a sample of the target eUICC. The Operator validates the Un-personalised Profile by testing a sample of the target eUICC personalised with a test Personalised Profile created from the Un -personalised Profile developed by the SM-DP. The downloadable Profile SHALL be provided in a standardised format.
3.3.1.1.2 Profile Ordering
Profile ordering covers the processes for the preparation and generation of the Personalised Profiles by the SM-DP based on the input data provided by the Operator to the SM-DP. The input data includes (but is not limited to): The quantity of the Profiles to be generated; IMSI value(s) or range; ICCID value(s) or range; Un-personalised Profile type(s); Information about the target eUICC(s), such as the EID.
How and when the input data is provided by the Operator to the SM-DP is out of scope.
3.3.1.1.3 Generation of Personalisation Data
This function creates the credential and key values (e.g. NAC, PINs, OTA Keys) in a secure environment based on the input data provided by the Operator (e.g. IMSI, ICCID).
3.3.1.1.4 Profile Personalisation
SM-DP inserts the Personalisation Data into the Un-personalised Profile with respect to the order placed by the Operator. This function addresses the procedures which ensure a created Personalised Profile can only be installed on a specific eUICC.
3.3.1.1.5 EUM Services, Scripts, Tools or Documentation
To allow any SM-DP to undertake the above functions on any eUICC or the documentation
supplied by the EUM must support at least the following eUICC attributes which MAY be
delivered by the Operator. Some attributes are related to the function of Un-personalised
Profile Creation and some to Profile Personalisation and in some cases the function to which
they apply MAY be dependent on the particular eUICC.
The attributes are:
Applications (and assignment of the applications) to be used or loaded, including
USIM, ISIM, CAT and third party application SSDs; Algorithm selection, algorithm parameter assignment, and algorithm parameter
loading within the eUICC platform; Application Key and PIN assignment and loading;
Optional and variable data fields in the USIM application file structure;
Additional data fields and file structures to support other applications – both SIM-
based and device-based applications.The information exchanged between the SM-DP and EUM is not standardised and MAY differ between different entities.
3.3.1.2 Functions for Profile Management
3.3.1.2.1 eUICC Eligibility Verification Function
The eUICC Eligibility Verification function covers the following aspects: Verification of the targeted eUICC for installing the Profile in preparation. Verification of the eUICC certification.
3.3.1.2.2 Profile Download and Installation Function
This function allows the download and installation of a Personalised Profile into the targeted eUICC.
3.3.1.2.3 Profile Content Update Function
This is handled by an Operator OTA Platform.
3.3.1.2.4 Policy Rules Update Function
This function updates the Policy Rules. The Policy Rules to be updated MAY be the ones in the SM-SR, or the ones within a Profile already installed in the ISD-P on the eUICC.
3.3.1.2.5 Profile Lifecycle Management Authorisation Function
This covers the setting, unsetting and status enquiry of the PLMA in the SM-SR, initiated by the Operator.
3.3.1.3 Functions for Platform Management
3.3.1.3.1 ISD-P Creation Function
This function creates an ISD-P within the eUICC in preparation for Profile content to be loaded.
3.3.1.3.2 ISD-P Deletion Function
This function allows the deletion of an ISD-P. ISD-P deletion is the permanent removal of an ISD-P along with its content previously loaded and installed on the eUICC. An ISD-P can be deleted only when it is in disabled state (see state diagram in section 3.2.3).
3.3.1.3.3 Master Delete Function
The Master Delete Function allows the deletion of an Orphaned Profile without the Fall-Back Attribute set regardless of the Profile’s policy rules. This function will delete the Profile and its ISD-P. The deletion of a Profile can only happen when the Profile is in disabled state and its Fall-Back Attribute is not set.
3.3.1.3.4 Profile Enabling Function
This function is used to Enable a Profile in Disable state. This will make the applications and files within the Profile visible to and selectable by the M2M Device subject to relevant access control.
3.3.1.3.5 Profile Disabling Function
This function is used to Disable a Profile in Enable state. This will make all applications and files within the Profile invisible to and not selectable by the Device.
3.3.1.3.6 Set Fall-Back Attribute
This function sets the Fall-Back Attribute of a Profile on the eUICC
3.3.1.3.7 Transport Function
Transport function refers to the establishing of the communication channel between the SM-
SR and the ISD-R on the eUICC.
Security of transport channel between the SM-SR and eUICC is also addressed by this
function.
NOTE: The eUICC within a Device MAY be contacted over different type of network
systems (such as GSM, GPRS, UMTS, or EPS) by the SM-SR. Furthermore,the SM-SR will need to interface with the concerned network system accordingly. For instance the SM-SR would need to use SMPP to be able to communicate with SMS, or it MAY need to connect to an IMS gateway in order to establish an IP-based communication with the eUICC. These communications are being provided by the active Subscription.
3.3.1.3.8 Policy Enforcement Function
This deals with the enforcement of the policy rules on the eUICC and at the SM-SR.
3.3.1.4 Functions for eUICC Management
3.3.1.4.1 eUICC Registration Function
This function is called to register an eUICC in an SM-SR.
3.3.1.4.2 SM-SR Change Function
This function is called to initiate the change the change of an SM-SR for an eUICC. SM-SR change is the transfer of the EIS for an eUICC from one SM-SR to another SM-SR and the establishment of new key set, in the ISD-R, between the new SM-SR and the eUICC.
3.3.1.5 eUICC Functions
3.3.1.5.1 Fall-Back Function
This function activates the Fall-Back Mechanism that disables the currently Enabled Profile and enables the Profile with Fall-Back Attribute set. For example, in the case of permanent loss of network connectivity for the Enabled Profile.
3.3.1.6 Device Functions
3.3.1.6.1 Local Enable of the Emergency Profile
This function enables the Device to enable the Emergency Profile.
3.3.1.6.2 Local Disable of the Emergency Profile
This function enables the Device to disable the Emergency Profile.
3.3.1.6.3 Local Enable of the Test Profile
This function enables the Device to enable the Test Profile.
3.3.1.6.4 Local Disable of the Emergency Profile
This function enables the Device to disable the Test Profile.
3.3.2 Void
3.4 Profile Description
3.4.1 General Content of a Profile Installed on an eUICC
The following data is part of a Profile:
The Applications and files as defined in the relevant specifications (in particular
3GPP TS 31.102 [18], 3GPP TS 31.103 [19] and ETSI TS 102 221 [3]).
In addition to the above, the following data which is not included in the above standards:
The algorithm parameters associated with its corresponding Network Access
Application (for instance with Milenage: the OPc, ri, ci values);
Policy Rules attached to the Profile (POL1).3.4.2 Access to the Content of a Profile
For the Device the Enabled Profile is equivalent to an UICC. For an Operator OTA Platform, the Enabled Profile is equivalent to an UICC as per ETSI TS 102 225 [6], TS 102 226 [7] and TS 102 223 [5]. The Policy Rules POL1 attached to the Profile are managed through the Operator OTA Platform, as per the rest of the content of the Profile. An applet in the Enabled Profile will work the same manner as an applet in an UICC as per relevant ETSI and 3GPP standards.
3.5 Procedures
The procedures described in this section involve both interactions between the Roles of the business environment (e.g. between a Subscriber and a Telecommunication Service Provider) and between entities of the remote Provisioning architecture (e.g. between eUICC and SM-SR). For each procedure the main steps as well as the related “Start conditions” and “End conditions” are described. “Start conditions” describe a set of prerequisites which must hold before the procedure can be performed. “End conditions” describe a set of results which will hold after the procedure has been performed. The following main procedures for the Provisioning and lifecycle management of eUICCs and related Profiles are identified:
No Name Purpose
1 eUICC Registration at SM-SR To register a newly manufactured eUICC at a given
SM-SR as a prerequisite for subsequent remote
management
2 Profile Ordering For the Operator to order at the SM-DP a quantity of
Profiles ready for download
3 Profile Download and Installation To download a Profile to a given eUICC
4 Master Delete To delete an Orphaned Profile in a given eUICC
5 Profile Enabling To enable a Profile in a given eUICC via SM-SR6 Profile Enabling via SM-DP To enable a Profile in a given eUICC via SM-DP
7 Profile Disabling To disable the Enabled Profile and enable the Profile
with Fall-Back Attribute set.
8 ISD-P Deletion To delete a Profile and its ISD-P from a given eUICC
via SM-SR.
9 ISD-P Deletion via SM-DP To delete a Profile and its ISD-P from a given eUICC
via SM-DP.
10 SM-SR Change To change the SM-SR of a given eUICC
11 ISD-P Key Establishment Key establishment procedure between the SM-DP
and the ISD-P.
NOTE: This procedure is part of the Profile
Download and Installation
procedure.
12 Fall-Back Mechanism To enable the Profile with Fall-Back Attribute set in
a given eUICC
13 eUICC Certificate Check To verify whether the targeted eUICC is certified.
14 ProfileLifecycle Management To set, to delete or to enquire the status of PLMA in
Authorisation Function the SM-SR
15 Profile Enabling via M2M SP To enable a Profile in a given eUICC via M2M SP.
16 Profile Disabling via M2M SP To disable the enabled Profile and to enable the
Profile with Fall-Back Attribute set via M2M SP.
17 ISD-P Deletion via M2M SP To delete a Profile and its ISD-P from a given eUICC
via M2M SP.3.5.1 eUICC Registration at SM-SR
eUICCs are manufactured, according to given standards, generally independent from Device
makers, mobile operators or Telecommunication Service Providers. The Device
manufacturers can select any certified eUICC that fits their purpose and order it in the
necessary quantity directly from the EUM. In order to allow subscription management
procedures, the EUM registers the eUICC at a selected SM-SR. This means that related
information which is relevant throughout its further lifetime, in particular the Platform
Management Credentials, Provisioning MSISDN, are stored in the SM-SR database. Without
this step, remote access to the eUICC for the purpose of subscription management will be
impossible.
NOTE: It is assumed that at this stage the eUICC does contain a Provisioning Profile
and is linked to an active Provisioning Subscription. How the Provisioning
operator is selected and the nature of the related commercial and technical
agreements between the EUM and the Provisioning Operator are out of scope
of this document.The following represents a functional representation of the eUICC Information Set:
EIS = { EID,
Type, Version, Production Date,
Platform Management Credentials, Certificate,
Available Memory, Total Memory,
SRID,
{ Profile 0: Profile Type, ISD-P AID, ICCID, MSISDN, State, DPID, Allocated Memory, POL2
Profile 1: Profile Type, ISD-P AID, ICCID, MSISDN, State, DPID, Allocated Memory, POL2
… Profile n: …
}
}The eUICC registration comprises the following steps:
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
participant "EUM" as EUM #FFFFFF participant "SM-SR" as SR #FFFFFF
EUM -> SR: [1] eUICC registration request (EIS)
rnote over SR #FFFFFF [2] EIS registration in database end rnote
SR -> EUM: [3] eUICC registration confirmation
@enduml
Figure 4: eUICC Registration at SM-SR
Start Condition: eUICCs are produced and a Provisioning Profile is loaded and active in the
Provisioning operator’s network. They are tested and ready for shipment. Each eUICC has a
corresponding EIS.
Procedure:
1. The EUM sends a eUICC registration request to the selected SM-SR, containing the
EIS.
2. The SM-SR stores the EIS in its database, with EID as the key parameter.
3. The SM-SR confirms the successful registration towards the EUM.
End Condition: The eUICC is registered at the SM-SR and ready for Platform and Profile
Management operations.
Each eUICC MAY only be registered at one SM-SR. The communication link between the
EUM and the SM-SR SHALL be secure.3.5.2 Un-personalised Profile Verification (Proprietary)
Within the eUICC, the current functional scope of the UICC is represented by a Profile. Similar to the verification of classic UICCs, Profiles SHALL be verified by the entity that creates the Profile, the SM-DP. For the verification of a Profile by the SM-DP, a similar
procedure as for a classic UICC SHALL be used. One of the differences is that physical test
eUICCs are only personalised by the SM-DP.
NOTE: The Profile verification processes and interfaces are not standardised and
MAY differ between Operators and SM-DPs (Profile validation strategy, which
tests MAY be performed by the Operator, which MAY be done by the SM-DP,
what MAY be exchanged between the Operator and SM-DP, how this interface
is secured, etc.).
For example, the Profile verification procedure MAY comprise the following steps:
Start Condition:
a. The Profile Description has been provided by the Operator to the SM-DP and the Un-
personalised Profile has been generated by the SM-DP in a separate process.
b. The SM-DP has sample eUICCs of a specific type.Procedure:
1. The Operator provides a test subscription to the selected SM-DP, as well as data such
as applets, POL1 and Profile type. Other data, e.g. keys or ICCID, MAY be generated
by the SM-DP.
2. The SM-DP creates a test Personalised Profile (Un-personalised Profile personalised
with test data, including the data received from the Operator), then downloads and
installs it onto an eUICC sample.
3. The SM-DP performs the necessary validation procedure to verify the combination of
the eUICC sample and the test Personalised Profile.End Condition: The Un-personalised Profile is valid and is now ready for the Profile ordering procedure for an eUICC type.
3.5.3 Profile Ordering (Proprietary)
Within the eUICC, the current functional scope of the UICC is represented by a Profile. Just
as with current UICCs, Profiles are ordered under the responsibility of the Operator.
The same procedures SHALL apply with the only difference being that the UICCs are not
produced in physical form but are kept at the SM-DP as Profiles.
NOTE: Profile ordering processes and interfaces are not standardised and MAY differ
between Operators.
For example, the Profile ordering MAY comprise the following steps:@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
participant "Operator" as OP #FFFFFF participant "SM-DP" as DP #FFFFFF
OP -> DP: [1] Profile Order (Profile specification, quantity, IMSIs)
rnote over DP #FFFFFF [2] Profile personalisation: Generation of individual keys and credentials and insertion into Generic Profiles
end rnote
DP -> OP: [3] Order Completion Messages (IMSIs, Kis, ICCIDs, …)
rnote over OP #FFFFFF
[4] Installation at HLR/AuC
end rnote@enduml
Figure 5: Profile Ordering
Start Conditions:
a. An Un-personalised Profile has been created by the SM-DP based on the Profile
Description provided by the Operator.
b. The Operator has a demand for a quantity of eUICC Profiles.
c. The Un-personalised Profile has been validated on the target eUICC type using t he
Un-personalised Profile verification procedure in section 3.5.2Procedure: 1. The Operator provides an order to a selected SM-DP. The order contains production data such as the quantity and a Start-IMSI, an IMSI range or a list of IMSIs and a reference to the Un-personalised Profile type. The POL1 and POL2 definitions for the Policy Rules to be applied later by respectively the eUICC and SM-SR can also be delivered in this context.
2. The SM-DP then starts production, i.e. personalisation of Profiles using the data received from the Operator. Other data, e.g. keys or ICCID, MAY be generated by the SM-DP during the personalisation process. The Profiles are stored within the SM-DP. 3. Order completion is confirmed to the Operator, including all data necessary to register the Profiles in the Operator’s backend systems. Each Profile is uniquely identified at least by its ICCID. 4. The Operator installs the Profiles in the related systems, e.g. HLR, AuC, CRM. These procedures are no different from current UICC registration processes at the Operator.
End Condition: The ordered quantity of Profiles is now ready for the Profile download procedure. Related Operator Credentials are available to the Operator.
3.5.4 Profile Download and Installation
In order for the Device to be used for communication services, the eUICC must be loaded with at least one Operational Profile. In general, this will be done over -the-air, using the
Subscription represented by the currently Enabled Profile. If no other Oper ational Profile is enabled the Provisioning Profile is used. The Profile download and installation procedure follows the following steps:
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
participant “Operator” as OP #FFFFFF participant “SM-DP” as DP #FFFFFF participant “SM-SR” as SR #FFFFFF box “eUICC” #FFFFFF participant “ISD-R” as ISDR #FFFFFF participant “ISD-P” as ISDP #FFFFFF endbox
OP->DP: [1] Profile Download Request\n(SRID, EID, ICCID, {Enable Request})
Rnote over DP #FFFFF [2] SM-SR Identification Endrnote
DP<->SR: [3] Mutual Authentication
DP->SR: [4] EIS Request (EID)
Rnote over SR #FFFFFF [5] EIS Retrieval Endrnote
SR->DP: [6] EIS Response
DP-->OP: [8] EIS Conflict:\nConflict Report
DP->SR: [9] ISD-P Installation Request
SR<->ISDR: [10] Mutual Authentication
Hnote over DP, ISDR #FFFFFF [11.a] ISD-P Creation Endhnote
SR->DP: [11.b] ISD-P Creation Confirmation
Hnote over SR, ISDP #FFFFFF [12] ISD-P Key Establishment Procedure Endhnote
Rnote over DP #FFFFFF [13] Protection of Personalised Profile with ISD-P Keyset (EncP) endrnote
DP->SR: [14] Secure Transport Channel \nRequest (EID)
DP->SR: [15.a] Profile Download and Installation \n(EncP)
Group Secure Transport Channel SR->ISDR: [15.b] Profile Download and\nInstallation (EncP) End
ISDR->ISDP: [15.c] Profile Download and \nInstallation (EncP)
Rnote over ISDP #FFFFFF
Decryption and Installation Of Profile using ISD-P Key Endrnote
ISDP->ISDR: [16.a] Profile Installation \nConfirmation
Group Secure Transport Channel ISDR->SR: [16.b] Profile Installation Confirmation End
SR->DP: [16.c] Profile Installation Confirmation
DP->SR: [17] Profile Installation Result (EIS)
Rnote over SR #FFFFFF [18] Insert new Profile Record in EIS Endrnote
SR->DP: [19] Profile Download Confirmation
Group Conditional DP->SR: [20] Profile Enabling via SM-DP End
DP->OP: [21] Profile Download Confirmation\n
@enduml
Figure 6: Profile Download
Start Conditions: a. A Subscriber has subscribed to a selected Operator. b. The EID of the target eUICC and the SRID are known by the Operator. c. A Profile ordering procedure has been completed with a selected SM-DP. d. The target eUICC is integrated into a Device and is associated to an SM-SR. e. The Operator MAY activate the related Subscription in the network by the ICCID.
Procedure:
1. The Operator sends a Profile Download request to the SM-DP. The request must
include the relevant information to allow the identification of the SM-SR, the target EID
and ICCID.
The Operator MAY also ask the SM-DP to enable the Profile once it is downloaded
and installed.2. Based on the information provided by the Operator, the SM-DP identifies the SM-SR,
where the eUICC is currently registered.
3. The SM-SR and the SM-DP authenticate each other if not already authenticated.
4. The SM-DP requests from the SM-SR the EIS for that particular eUICC, identified by
its EID.
5. Based on the EID, the SM-SR retrieves the EIS.
6. The SM-SR sends the relevant information from the EIS to the requesting SM-DP.
NOTE: The rationale for saying “relevant information from the EIS” is that the
SM-SR will not provide information to the SM-DP that is not appropriate
for the particular SM-DP.
7. The SM-DP checks the eligibility of the eUICC (e.g. type, certificate an d memory)
based upon the received information from the EIS.
8. If a problem is detected with the eligibility of the eUICC, the SM-DP aborts the
procedure and returns an error message to the requesting Operator.
9. If no problem is detected with the eligibility of the eUICC, the SM-DP issues an
installation request for the ISD-P to the SM-SR.
10. The SM-SR and the eUICC, using the key set in the ISD-R, authenticate each other if
not already authenticated.
11. The SM-SR contacts the ISD-R on the eUICC for ISD-P installation and an empty ISD-
P is created in the eUICC. This is confirmed back to the SM-DP.
12. The SM-DP and the eUICC authenticate each other and a shared key set is
established between the ISD-P and the SM-DP through the SM-SR. The Key
Establishment Procedure is described in Security Section 4.5.
13. Now the SM-DP selects the Personalised Profile (e.g. based on the ICCID or Profile
type) and protects it using the new ISD-P key set, producing the encrypted and
integrity protected Profile EncP.
14. The SM-DP asks the SM-SR to establish a secure transport channel between the ISD-
R on the eUICC and the SM-SR. This secure transport channel is for protection of
Profile management commands not the Profile itself.
15. The SM-DP initiates the Profile Download and Installation by sending the EncP to the
eUICC using a secure channel between the SM-DP and the newly created ISD-P on
the eUICC, and within the established secure transport channel between the SM-SR
and the ISD-R on the eUICC.
16. The eUICC sends the result of the installation of the Profile to the SM-DP.
The Operator owner of the Profile decides whether, at the end of Profile installation,
the SCP03 key set in the ISD-P SHALL be removed by the SM-DP, retained by the
SM-DP or be handed over to the Operator.
NOTE: If the Operator decides that the key set is retained by the SM-DP the
Operator can instruct the SM-DP to handover or delete the key set at
a later point in time.
17. SM-DP sends the result of the installation of the Profile to the SM-SR. This message
includes the relevant EIS elements for this Profile.
18. The SM-SR updates its database. If the download and installation was successful, the
SM-SR inserts a new Profile record into the EIS, with the status “disabled”. 19. The SM-SR confirms the status of the Profile download and installation back to the
SM-DP.
20. If the Operator asked the SM-DP to enable the Profile once it is downloaded and
installed, the SM-DP executes the Profile Enabling via SM-DP procedure (see 3.5.7).
21. The SM-DP confirms the status of the download and installation back to the Operator.
This message includes the information to identify the Profile.
End Condition: An ISD-P has been created in the eUICC for the Operator, containing a
Profile in disabled or enabled state. The SM-SR has updated the EIS for this eUICC
accordingly.3.5.5 Master Delete
This procedure deletes an Orphaned Profile without the Fall-Back Attribute set regardless of
the Profile’s Policy rules.
The successful execution of this procedure requires the authorisation of both the Initiator and
the SM-DP.
NOTE: The actor who assumes the role of the initiator needs to be determined. In the
example below we can assume the initiator will be the new Operator with the
authorisation of the Subscriber.@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
participant “Initiator\n<size:10>(new Operator)</size>” as INI #FFFFFF participant “SM-SR” as SR #FFFFFF participant “SM-DP” as DP #FFFFFF participant “Operator\n<size:10>(of target Profile)</size>” as OP #FFFFFF box “eUICC” #FFFFFF participant “ISD-R” as ISDR #FFFFFF participant “ISD-P” as ISDP #FFFFFF endbox
INI->SR: [1] Master Delete Request\n(ICCID, Auth 1)
SR->DP: [2] Authorisation Request\n(ICCID, Auth 1)
hnote over DP, OP #FFFFFF [3] Authorisation (out of scope) end hnote
DP->SR: [4.a] Authorisation Response\n(ICCID, Auth 2)
SR-->INI: [4.b] Response (ICCID)
SR<->ISDR: [5] Mutual Authentication
SR->ISDR: [6] Master Delete Request (ICCID, Auth 2)
ISDR->ISDP
rnote over ISDP #FFFFFF [7] Verification endrnote
ISDP-> ISDR
rnote over ISDR #FFFFFF [8] Deletion endrnote
ISDR->SR: [9] Response (ICCID)
rnote over SR #FFFFFF [10] Update EIS endrnote
SR->INI: [11] Response (ICCID)
@enduml
Figure 7: Master Delete
Start Conditions:
a. There is an Orphaned Profile on a eUICC which is, for example, blocking the loading
of another Profile.
b. The Orphaned Profile cannot be deleted using the normal ISD-P deletion procedure.
c. The Initiator decides to delete the Orphaned Profile on the eUICC.
d. The Orphaned Profile is disabled.Procedure:
1. The Initiator sends a master delete request to the SM-SR. The request includes the
target EID and the ICCID of the target Profile. The request includes the Initiator’s
authorisation (Auth 1) for the master delete. 2. The SM-SR sends the authorisation request together with the initiator authorisation
(Auth 1) to the SM-DP associated with the target Profile. The SM-DP verifies the
authorisation (Auth 1).
3. The SM-DP also requests authorisation from the Operator owner of the target Profile.
NOTE: The definition of this interface is out of the scope of this document.
4. If the Operator authorises the deletion or if there is no response from the Operator,
the SM-DP sends a response to the SM-SR containing the SM-DP’s authorisation
(Auth 2) for the master delete. If the SM-DP does not give its authorisation for the
master delete the SM-SR informs the Initiator.
5. The SM-SR and the eUICC, using the key set in the ISD-R, authenticate each other if
not already authenticated.
6. The SM-SR sends the master delete request to the ISD-R on the eUICC. The request
includes the ICCID of the target Profile and the authorisation of the SM-DP (Auth 2).
7. The ISD-P of the target Profile verifies the authorisation, thus verifying the master
delete command.
8. The ISD-R deletes the target Profile and the related ISD-P without Policy Rule
enforcement.
9. The ISD-R reports the status of the master delete to the SM-SR.
10. The SM-SR updates the EIS accordingly.
11. The SM-SR reports the status of the master delete to the Initiator.
End Condition: The target Profile is deleted from the eUICC. The EIS in the SM-SR is up to
date.3.5.6 Profile Enabling
A switch between two Profiles can be achieved by the following dedicated procedure. In this case the request is issued directly by the Operator to the SM-SR associated with the target eUICC. @startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
participant “M2M SP” as SP #FFFFFF participant "Operator" as OP #FFFFFF participant "SM-SR" as SR #FFFFFF box “eUICC” #FFFFFF participant “ISD-R” as ISDR #FFFFFF endbox
OP -> SR : [1] Profile Enabling Request (EID, ICCID)
rnote over SR #FFFFFF [2] POL2 Check of currently enabled Profile endrnote
SR --> OP : [3] POL2 Conflict Report
SR<->ISDR: [4] Mutual Authentication
SR -> ISDR : [5] Profile Enabling Request (ISD-P-AID)
rnote over ISDR #FFFFFF
[6] POL1 Check endrnote
ISDR --> SR : [7] POL1 Conflict Report
rnote over ISDR #FFFFFF [8] Currently Enabled Profile is Disabled Target Profile is Enabled endrnote
ISDR -> SR : [9] Profile Switch Confirmation
rnote over SR #FFFFFF [10] EIS Update: Target Profile is now Enabled Previous Profile is Disabled endrnote
SR -> OP : [11] Profile Switch Result (EID, ICCID, …)
Opt SR->SP: [12] Profile Switch Result (EID, ICCID, …) end
@enduml
Figure 8: Profile Enabling
Start Conditions:
a. The target Profile is disabled on the eUICC. Another Profile is enabled.
b. The Subscription associated with the target Profile is active in the Operator’s
network.
c. The EID of the target eUICC, the SRID associated with the target Profile and the
ICCID of the target Profile are known by the Operator.
Procedure:
1. The Operator sends a Profile Enabling request to the SM-SR. The request includes
the target EID and at least the ICCID of the target Profile.2. The SM-SR checks if the POL2 of the currently Enabled Profile permits the Profile
switch to take place.
3. If there is a conflict with POL2, the SM-SR aborts the procedure and informs the
concerned Operator accordingly.
4. The SM-SR and the eUICC, using the key set in the ISD-R, authenticate each other if
not already authenticated.
5. If there is no conflict with POL2, the SM-SR issues a Profile Enabling request to the
ISD-R on the eUICC including at least the ISD-P AID of the target Profile.
6. The eUICC performs a POL1 check.
7. If there is a conflict with POL1, the ISD-R aborts the procedure and informs the SM-
SR.
8. If there is no conflict with POL1, the ISD-R performs the Profile switch resulting in the
target Profile being enabled and the previously Enabled Profile being disabled.
9. The ISD-R reports the Profile switch result to the SM-SR.
10. If the switch is successful the SM-SR records in the EIS that the target Profile is
enabled and the previous Profile is disabled.
11. The SM-SR reports the Profile switch result back to the Operator(s). These messages
will include the EID and the ICCID of their respective Profiles.
12. The SM-SR SHALL report the Profile switch result back to the M2M SP if requested
by the Operator during PLMA registrations (see 3.5.15). These messages will include
the EID and the ICCID of the targeted Profiles.End Condition: The target Profile is enabled on the eUICC. The previously En abled Profile is disabled. The EIS is up to date.
3.5.7 Profile Enabling via SM -DP
A switch between two Profiles can be achieved by the following dedicated procedure. In this case, the request is issued by the Operator to the SM-DP which forwards it to the SM- SR associated with the target eUICC. This way, the Operator does not have to be linked to the SM-SR and relies on the SM-DP to make the connection.
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
participant “M2M SP” as SP #FFFFFF Participant “Operator” as OP #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-R” as ISDR #FFFFFF Endbox
OP->DP: [1] Profile Enabling Request\n(EID, ICCID)
rnote over DP #FFFFFF [2] Identify SM-SR endrnote
DP<->SR: [3] Mutual Authentication
DP->SR: [4] Profile Enabling Request
rnote over SR #FFFFFF [5] POL2 Check of currently Enabled Profile and Target Profile endrnote
SR-->DP: [6] POL2 Conflict Report
DP-->OP: [7] POL2 Conflict Report
SR<->ISDR: [8] Mutual Authentication
SR->ISDR: [9] Profile Enabling\nRequest (ISD-P-AID)
rnote over ISDR #FFFFFF [10] POL1 Check endrnote
ISDR-->SR: [11] POL1 Conflict Report
rnote over ISDR #FFFFFF [12] Currently Enabled Profile is Disabled. Target Profile is Enabled endrnote
ISDR->SR: [13] Profile Switch Result
rnote over SR #FFFFFF [14] EIS Update: Target Profile is now Enabled. Previous Profile is Disabled endrnote
SR->DP: [15] Profile Switch Result\n(EID, ICCID, …)
DP->OP: [16] Profile Switch Result\n(EID, ICCID, …)
Opt SR->SP: [17] Profile Switch Result (EID, ICCID, …) end
@enduml
Figure 9: Profile Enabling via SM-DP
Start Conditions:
a. The target Profile is disabled on the eUICC. Another Profile is enabled.
b. The Subscription associated with the target Profile is active in the Operator’s
network.
c. The EID of the target eUICC, the SRID and the ICCID of the target Profile are known
by the Operator.
Procedure:
1. The Operator sends a Profile Enabling request to the SM-DP. The request includes
the target EID and at least the ICCID of the target Profile.
2. The SM-DP identifies the related SM-SR.
3. The SM-SR and the SM-DP authenticate each other if not already authenticated.
4. The SM-DP forwards the Profile Enabling request to the SM-SR.
5. The SM-SR checks if the POL2 of the currently Enabled Profile permits the Profile
switch to take place.6. If there is a conflict with POL2, the SM-SR aborts the procedure and informs the
requesting SM-DP.
7. If there is a conflict with POL2, the error message is forwarded by the SM-DP to the
requesting Operator.
8. The SM-SR and the eUICC, using the key set in the ISD-R, authenticate each other if
not already authenticated.
9. If there is no conflict with POL2, the SM-SR issues a Profile Enabling request to the
ISD-R on the eUICC including at least the ISD-P AID of the target Profile.
10. The eUICC performs a POL1 check.
11. If there is a conflict with POL1, the ISD-R aborts the procedure and informs the SM-
SR.
12. If there is no conflict with POL1, the ISD-R performs the Profile switch resulting in the
target Profile being enabled and the previously enable Profile being disabled.
13. The ISD-R reports the Profile switch result to the SM-SR.
14. If the switch is successful the SM-SR records in the EIS that the target Profile is
enabled and the previous Profile is disabled.
15. The SM-SR reports the Profile switch result back to the requesting SM-DP and the
SM-DP or Operator of the disabled Profile. These messages will include the EID and
the ICCID of their respective Profiles.
16. The Profile switch result is forwarded to the requesting Operator.
17. The SM-SR SHALL report the Profile switch result back to the M2M SP if requested
by the Operator during PLMA registration (see 3.5.15). These messages will include
the EID and the ICCID of the targeted Profiles.End Condition: The target Profile is enabled on the eUICC. The previously Enabled Profile is disabled. The EIS is up to date.
3.5.8 Profile Disabling
Profile disabling can be achieved by the following procedure. The request is issued directly by the Operator to the SM-SR associated with the target eUICC.
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
participant “M2M SP” as SP #FFFFFF Participant “Operator” as OP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-R” as ISDR #FFFFFF endbox
OP->SR: [1] Profile Disabling Request \n(EID, ICCID)
SR-->OP: [2] Fall-Back Attribute Conflict
rnote over SR #FFFFFF [3] POL2 Check of current
Enabled Profile endrnote
SR-->OP: [4] POL2 Conflict Report
SR<->ISDR: [5] Mutual Authentication
SR->ISDR: [6] Provisioning Profile Enabling Request
rnote over ISDR #FFFFFF [7] POL1 Check of current Enabled Profile
IF OK, current Enabled Profile is Disabled and Profile with Fall-Back Attribute is Enabled endrnote
ISDR->SR: [8] Profile Disabling Result
rnote over SR #FFFFFF [9] EIS Update: Target Profile is now Disabled. Profile with Fall-Back Attribute is Enabled endrnote
SR->OP: [10] Profile Disabling Result \n(EID, ICCID, …)
Opt SR->SP: [11] Profile Disabling Result (EID, ICCID, …) end
@enduml
Figure 10: Profile Disabling
Start Condition: The target Profile is enabled on the eUICC.
Procedure:
1. The Operator sends a Profile Disabling request to the SM-SR. The request includes
the target EID and at least the ICCID of the target Profile.
2. If the target Profile for disabling is the Profile with Fall-Back Attribute set then the
Profile disabling SHALL NOT be executed.
3. The SM-SR checks if the POL2 of the Enabled Profile permits the Profile to be disabled
4. If there is a POL2 conflict, the SM-SR aborts the procedure and send error message
to Operator.
5. The SM-SR and the eUICC, using the key set in the ISD-R, authenticate each other if
not already authenticated.
6. If there is no POL2 conflict, the SM-SR issues a Profile enabling request to the ISD-R
on the eUICC for the Profile with Fall-Back Attribute set.
7. The eUICC performs an internal POL1 check for the currently Enable d Profile, and
verifies that the currently Enabled Profile does not have the Fall-Back Attribute set. If
permitted, the Enabled Profile is disabled and the ISD-R enables the Profile with Fall-
Back Attribute set.
8. The ISD-R sends reports the Profile disabling result to the SM-SR.9. If the disabling is successful the SM-SR records in the EIS that the target Profile is
disabled.
10. The SM-SR reports the Profile disabling result to the Operator(s). This message
includes the EID and the ICCID of the Profile(s).
11. The SM-SR SHALL report the Profile disabling result back to the M2M SP if requested
by the Operator during PLMA registration (see 3.5.155). These messages will include
the EID and the ICCID of the targeted Profiles.End Condition: The target Profile is now disabled on the eUICC, and the Profile with Fall- Back Attribute set is enabled.
3.5.9 ISD-P Deletion
A Profile can be deleted by its Operator.
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
participant “M2M SP” as SP #FFFFFF Participant “Operator” as OP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-R” as ISDR #FFFFFF Endbox
OP->SR: [1] ISD-P Deletion Request\n(EID, ICCID)
rnote over SR #FFFFFF [2] POL2 Check endrnote
SR-->OP: [3] Error
rnote over SR #FFFFFF [4] If Target Profile is Enabled, SM -SR starts Profile Disabling Procedure endrnote
SR<->ISDR: [5] Authentication
SR->ISDR: [6] ISD-P Deletion Request\n(ISD-P-AID)
rnote over ISDR #FFFFFF [7] POL1 Check endrnote
ISDR-->SR: [8] Error
rnote over ISDR #FFFFFF [9] eUICC Deletes the Profile and related ISD-P endrnote
ISDR->SR: [10] ISD-P Deletion Report
rnote over SR #FFFFFF [11] EIS Update endrnote
SR->OP: [12] ISD-P Deletion Report\n(EID, ICCID) Opt SR->SP: [13] ISD-P Deletion Report (EID, ICCID, …) end
@enduml
Figure 11: ISD-P Deletion
Start Condition: The Operator decides to permanently delete a Profile on a eUICC.
Procedure:
1. The Operator sends an ISD-P Deletion request to the SM-SR. The request includes
the target EID and the ICCID of the target Profile.
2. The SM-SR checks the POL2 of the target Profile, and verifies that the target Profile
does not have the Fall-Back Attribute set.
3. If there is a conflict with POL2 or with the Fall-Back Attribute, the SM-SR aborts the
procedure and informs the Operator(s) accordingly 4. If the target Profile is enabled, the SM-SR starts the Profile Disabling procedure.
5. The SM-SR and the eUICC, using the key set in the ISD-R, authenticate each other if
not already authenticated.
6. The SM-SR sends the ISD-P Deletion request to the ISD-R on the eUICC. The request
includes the ISD-P AID of the target Profile.
7. The eUICC performs a POL1 check and a Fall-Back Attribute check.
8. If there is a conflict with POL1 or with the Fall-Back Attribute, the ISD-R aborts the
procedure and informs the SM-SR.
9. If there is no conflict, the ISD-R then erases the target Profile and the related ISD-P.
10. The ISD-R reports the status of the ISD-P deletion to the SM-SR.
11. The SM-SR updates the EIS appropriately.
12. The SM-SR reports the status of the ISD-P deletion to the requesting Operator.
13. The SM-SR SHALL report ISD-P deletion result back to the M2M SP if requested by
the Operator during PLMA registration (see 3.5.15). These messages will include the
EID and the ICCID of the targeted Profiles.
End Condition: The target Profile is deleted from the eUICC. The EIS in the SM-SR is up to
date.3.5.10 ISD-P Deletion via SM -DP
A Profile can be deleted by its Operator. ISD-P deletion would be requested via the SM-DP. In this case, the Operator does not have to be linked to all SM-SRs and relies on the SM-DP to make the connection.
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
participant “M2M SP” as SP #FFFFFF Participant “Operator” as OP #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-R” as ISDR #FFFFFF endbox
OP->DP: [1] ISD-P Deletion Request\n(EID, ICCID, [SRID])
DP<->SR: [2] Mutual Authentication
DP->SR: [3] ISD-P Deletion Request\n(EID, ICCID)
Rnote over SR #FFFFFF [4] POL2 Check endrnote
SR-->DP: [5] Error
DP-->OP: [5] Error
Rnote over SR #FFFFFF [6] If Target Profile is Enabled, SM -SR
starts Profile Disabling procedure endrnote
SR<->ISDR: [7] Mutual Authentication
SR->ISDR: [8] ISD-P Deletion Request\n(ISD-P-AID)
Rnote over ISDR #FFFFFF [9] POL1 Check endrnote
ISDR-->SR: [10] Error
Rnote over ISDR #FFFFFF [11] eUICC Deletes the Profile and related ISD-P endrnote
ISDR->SR: [12] ISD-P Deletion Report
Rnote over SR #FFFFFF [13] EIS Update endrnote
SR->DP: [14] ISD-P Deletion Report\n(EID, ICCID)
DP->OP: [15] ISD-P Deletion Report\n(EID, ICCID)
Opt SR->SP: [16] ISD-P Deletion Report (EID, ICCID, …) end
@enduml
Figure 12: Operational Profile Deletion via SM -DP
Start Condition: The Operator decides to permanently delete a Profile on a eUICC.
Procedure:
1. The Operator sends an ISD-P Deletion request to the SM-DP. The request includes
the target EID and the ICCID of the target Profile. The Operator MAY also provide the
SRID.
2. The SM-SR and the SM-DP authenticate each other if not already authenticated.
3. If the SRID was not provided by the Operator the SM-DP identifies the related SM-
SR. The request is passed on to the dedicated SM-SR.
4. The SM-SR checks the POL2 and the Fall-Back Attribute of the target Profile.
5. If there is a conflict with POL2 or with the Fall-Back Attribute, the SM-SR aborts the
procedure and informs the Operator(s) accordingly
6. If the target Profile is enabled, the SM-SR starts the Profile Disabling procedure.
7. The SM-SR and the eUICC, using the key set in the ISD-R, authenticate each other if
not already authenticated.8. The SM-SR sends an ISD-P Deletion request to the ISD-R on the eUICC. The request
includes the ISD-P AID of the target Profile.
9. The eUICC performs a POL1 check and a Fall-Back Attribute check.
10. If there is a conflict with POL1 or with the Fall-Back Attribute, the ISD-R aborts the
procedure and informs the SM-SR.
11. If there is no conflict, the ISD-R then erases the target Profile and the related ISD-P.
12. The ISD-R reports the status of the ISD-P deletion to the SM-SR.
13. The SM-SR updates the EIS appropriately.
14. The SM-SR reports the status of the ISD-P deletion to the requesting SM-DP.
15. The SM-DP reports the status of the ISD-P deletion to the requesting Operator.
16. The SM-SR SHALL report ISD-P deletion result back to the M2M SP if requested by
the Operator during PLMA registration (see 3.5.15). This message will include the EID
and the ICCID of the targeted Profile.End Condition: The target Profile is deleted from the eUICC. The EIS in the SM-SR is up to date.
3.5.11 SM-SR Change
This procedure assumes that, prior to the procedure being executed, the Operators with installed Profiles on the concerned eUICC might request to be informed of the change by the current SM-SR (SM-SR1) and be allowed to take action as it relates to the desired disposition of their Profile (e.g. do nothing, update Policy rules, delete the Profile). In the case where the SM-SR has to be changed, the credentials of the individual eUICCs must remain confidential.
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “M2M SP” as SP #FFFFFF Participant “Operator(s)” as OP #FFFFFF Participant “Initiator” as INI #FFFFFF Participant “SM-SR<size:7>1</size>” as SR1 #FFFFFF Participant “SM-SR<size:7>2</size>” as SR2 #FFFFFF Participant “eUICC” as EUICC #FFFFFF
INI->SR2: [1] SM-SR Change Request
SR2->INI: [2] Confirmation
INI->SR1: [3] SM-SR Change Request
SR1->SR2: [4] Send EIS Dataset
SR2<->EUICC: [5] Key Establishment
SR2->EUICC: [6] Delete keyset related\nto SM-SR<size:7>1</size>
SR2->SR1: [7] Confirmation of\nSM-SR Change
SR2->INI: [7] Confirmation of SM-SR Change
Rnote over SR1 #FFFFFF [8] Deletes EIS dataset related to the eUICC endrnote
SR1->INI: [9] Report of the SM-SR Change
SR2->OP: [10] Report of the SM-SR Change
Opt SR2->SP: [11] Report of the SM-SR Change end
@enduml
Figure 13: SM-SR Change
Start Conditions:
a. The EID of the eUICC is known
b. The SRIDs of SM-SR1 and SM-SR2 are known.
c. The ISD-R is personalised with the keys of SM-SR1.
d. The change of SM-SR is allowed.
Procedure:
1. The initiator sends a request to SM-SR2 for a change of SM-SR.
2. SM-SR2 confirms that it can take over this role.
3. The initiator, or SM-SR2 acting for the initiator, requests the change from SM-SR1.
4. SM-SR1 sends the EIS dataset of the specified EID to SM-SR2.
5. A new shared key set is established between SM-SR2 and the ISD-R via the secure
channel provided by SM-SR1. The Key Establishment Procedure is described in the
Annex D.2.6. Now SM-SR2 can address the ISD-R directly, and SM-SR2 requests the eUICC to
delete the key set related to SM-SR1.
7. SM-SR2 sends a confirmation of the change to the SM-SR1.
8. SM-SR1 deletes the EIS dataset related to the eUICC.
9. SM-SR1 sends a response to the Initiator, indicating the success of the overall SM-SR
change operation.
10. SM-SR2 sends a report to the Operator owner(s) of the Profile(s) on the eUICC, either
directly or via the SM-DP, of the change of SM-SR.
11. If applicable, SM-SR2 sends a report to the M2M SP managing the eUICC.End Conditions: a. The ISD-R is personalised with the keys of the target SM-SR (SM-SR2). b. The eUICC is registered within the target SM-SR (SM-SR2). c. The EIS and EID reside within the target SM-SR (SM-SR2). d. SM-SR1 is no longer related to the eUICC. e. The Operator(s) owner of the Profile(s) is/are aware of the change. f. The M2M SP managing the eUICC is aware of the change.
NOTE1: This procedure MAY not support the transfer of the PLMA. If such transfer is
supported, this is out of scope of this specification. In all cases, the Operator
MAY set the same or different PLMA on SM-SR2, as described in procedure
3.5.15.1.
NOTE2: In this procedure, the Initiator SHOULD be the Operator1 as it is the one
requesting the transfer from SM-SR1 to SM-SR2.3.5.12 ISD-P Key Establishment Procedure
This procedure is defined within section 4.5 of this document.
3.5.13 Fall-Back Mechanism
In the event of loss of network connectivity, as detected by the Device, there is a need to change to the Profile with Fall-Back attribute set. In this case the eUICC disables the currently Enabled Profile (Profile A) and enables the Profile with Fall-Back Attribute set (Profile B). If Profile A has POL1 rule “disable not allowed” set then the eUICC will overrule this setting. If Profile A has POL1 rule “Profile deletion is mandatory when it is disabled” set, the eUICC SHALL NOT automatically delete this Profile. For security reasons if Profile A has the POL1 rule “disabled not allowed” or “Profile deletion is mandatory when it is disabled” set then the eUICC can only switch back to Profile A except if Profile A has been deleted by use of the Master Delete function. Profile A cannot be deleted with a normal delete command in this situation.
Start Conditions:
a. The Device reports network loss to the eUICC.
b. The eUICC is configured to perform the Fall-Back mechanism if certain network
connectivity issues are reported by the Device.
c. The Profile with Fall-Back attribute set is not the presently Enabled Profile.Procedure:
1. The eUICC disables the currently Enabled Profile (overruling POL1 if necessary) and
enables the Profile with Fall-Back Attribute set.
2. The eUICC reports the change of Enabled Profile to the SM-SR. The SM-SR updates
the EIS.
3. The SM-SR reports the change to the respective owners of the targeted Profiles. and
to the M2M SP, if requested by the Operator during PLMA registration (see 3.5.15).End Condition: The eUICC has enabled the Profile with Fall-Back Attribute set and the EIS of the SM-SR is up-to-date.
3.5.14 eUICC Certificate Verification
This procedure defines how an SM-DP on behalf of the Operator can verify if an eUICC is
certified, in particular if the eUICC is designed according to the present specif ication.
Procedure:
1. The OperatorSM-DP, SHALL be able to retrieve the eUICC certificate from:
a. The EIS stored within the SM-SR in which the eUICC is registered
OR
b. The EUM
NOTE: this interface is out of scope of this document).
2. The SM-DP extracts the EUM information from the eUICC certificate (for example:
certificates, SAS-UP [23 UP [23] accreditation etc.).
3. With the information retrieved at step 2, the SM-DP requests the EUM certificate from
the SM-SR, the EUM or the GSMA.
NOTE: The interface to the EUM and GSMA are out of the scope of this
document).
4. The SM-DP verifies the validity and signature of the EUM certificate.
5. The SM-DP verifies the EUM signature of the eUICC certificate.
End Condition: The eUICC certificate and EUM certificate have been checked by the SM-
DP.3.5.15 Profile Lifecycle Management Authorisation Registration at SM- SR
In some circumstances, on one hand, an M2M SP MAY have to manage the lifecycle of Operator Profiles by its own, and to be notified of any change in Operator Profiles lifecycle on the eUICCs they are responsible for. On the other hand, it is important for an Operator to be able to control which M2M SP is allowed to perform Profile Lifecycle Management on Operator’s Profile(s). The Profile Lifecycle Management Authorisation (PLMA) mechanisms described in this chapter will allow Operators to provide Profile Lifecycle Management functionality to an M2M SP while keeping the control of allowed commands and reports. Furthermore, an Operator might be willing to receive or not reports when an authorised M2M SP is changing the lifecycle of its own Profile(s).
All PLMA requests defined below will require a prior mutual authentication between the Operator and the SM-SR. In case an Operator does not have a dedicated interface with an SM-SR, it SHALL be possible to manage PLMA via its SM-DP interface. The SM-DP SHALL forward PLMA management commands to the SM-SR without any further processing and SHALL NOT host any PLMA.
NOTE:It SHOULD be considered that the role of an M2M SP can also be played by a partner Operator or affiliate from the Operator.
3.5.15.1 Set Profile Lifecycle Management Authorisation
This procedure sets the PLMAs on the SM-SR and includes which Platform Management commands are allowed to be executed by an M2M SP and which reports SHALL be sent to M2M SP and Operator.
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “M2M SP” as SP #FFFFFF Participant “Operator” as OP #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF
Alt [via SM-SR] OP->SR: [1.a] Set PLMA (M2M SP ID,\nIdentifier, PLMA List) Rnote over SR #FFFFFF [2] PLMA creation Endrnote
SR->OP: [3.a] Set PLMA Report (Operator ID, \nIdentifier, PLMA List)
Else [via SM-DP] OP->DP: [1.b] Set PLMA (M2M SP ID,\nIdentifier, PLMA List)
Rnote over DP #FFFFFF Identify SM-SR Endrnote
DP<->SR: Mutual Authentication
DP->SR: [1.c] Set PLMA (M2M SP ID,\nIdentifier, PLMA List) Rnote over SR #FFFFFF [2] PLMA creation endrnote
SR->DP: [3.b] Set PLMA Report (Operator ID,\nIdentifier, PLMA List)
DP->OP: [3.c] Set PLMA Report (Operator ID, \nIdentifier, PLMA List) end
SR->SP: [3.d] Set PLMA Report (Operator ID, \nIdentifier, PLMA List)
@enduml
Figure 14: Set Profile Lifecycle Management Authorisation
Start Condition:
The Operator opened a dedicated interface with the SM-SR, either directly or through its SM-
DP, for PLMA management.
Procedure:
1. The Operator whose Profile is resident on a set of eUICCs sends a PLMA request
to the SM-SR managing those eUICCs, either directly (1.a) or through its SM-DP
(1.b, 1.c), to set PLMA.
2. The SM-SR creates the corresponding PLMA for a specific set of eUICCs and/or
Profiles based on dedicated identifier provided to the SM-SR.
3. The SM-SR confirms the successful creation of the PLMA by notifying the
requesting Operator, either directly (3.a) or through its SM-DP (3.b, 3.c), as well
as the correspondent M2M SP (3.d).NOTE:The definition of needed identifier to set the PLMA on eUICC and /or Profiles is out of scope of this specification.
End Condition: The SM-SR has set the Profile Lifecycle Management functionality for the addressed M2M SP. The M2M SP is able to manage the lifecycle of the targeted Profile on a set of eUICCs and to receive reports related to those Profiles. In case of change done on the referenced Profile by the referenced M2M SP, the Operator is receiving relevant reports.
The Operator is able to send the set PLMA requests only for its own Profiles. Any changes to the PLMA (e.g. removal of reports to be sent to M2M SP) must be done by this procedure. Depending on the Operator choice, the PLMA will allow:
a. The referenced M2M SP to:
Request to enable the referenced Profile.
Request to disable the referenced Profile.
Request to delete the referenced Profile.
Request to set the Fall-Back Attribute on the referenced Profile.
Un-Set the Fall-Back Attribute on the referenced Profile as a result
of setting it on another Profile.
Request to set the Emergency Profile Attribute on the referenced
Profile.
Un-Set the Emergency Profile Attribute on the referenced Profile as
a result of setting it on another Profile.
b. The referenced M2M SP to receive reports on:
Referenced Profile enabling.
Referenced Profile disabling.
Referenced Profile deletion.
Referenced Profile Fall-Back Attribute setting/un-setting.
Referenced Profile Emergency Profile Attribute setting/un-setting.
c. Optionally (if supported by the SM-SR), the Operator to not receive reports
on:
Referenced Profile enabling.
Referenced Profile disabling.
Referenced Profile deletion.
Referenced Profile Fall-Back Attribute setting/un-setting.
Referenced Profile Emergency Profile Attribute setting/un-setting.NOTE:When no PLMA is provided to the M2M SP but the M2M SP has the need to get status changes on Profiles being resident on eUICCs it is responsible for, it is up to the Operator, owning the Profiles on the eUICC, to forward reports about Profile status changes to the correspondent M2M SP. This is outside of this specification.
3.5.15.2 Retrieve Profile Lifecycle Management Authorisation– by Operator
With this procedure the Operator retrieves the PLMA set on the SM-SR. @startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “Operator” as OP #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF
Alt [via SM-SR] OP->SR: [1.a] Retrieve PLMA (M2M SP ID, Identifier)
Rnote over SR #FFFFFF [2] Retrieve PLMA
endrnote
SR->OP: [3.a] Command Result (PLMA List)
Else [via SM-DP] OP->DP: [1.b] RetrievePLMA (M2M SP ID, Identifier)
Rnote over DP #FFFFFF Identify SM-SR Endrnote
DP<->SR: Mutual Authentication
DP->SR: [1.c] Retrieve PLMA (M2M SP ID, Identifier)
Rnote over SR #FFFFFF [2] Retrieve PLMA endrnote
SR->DP: [3.b] Command Result (PLMA List)
DP->OP: [3.c] Command Result (PLMA List) end @enduml
Figure 15: Retrieve Profile Lifecycle Management Authorisation by Operator
Start Condition:
a. The Operator opened a dedicated interface with the SM-SR, either directly or
through its SM-DP, for PLMA management.b. PLMA MAY exist in the SM-SR.
Procedure:
1. The Operator whose Profile resides on a set of eUICCs sends a PLMA request to
the SM-SR managing those eUICCs, either directly (1.a) or through its SM-DP
(1.b, 1.c), to retrieve PLMA, applying to its Profile(s) for an M2M SP. It SHALL be possible for the Operator to set in the request only the M2M
SP ID and / or any identifier pointing to a set of eUICCs and/or Profiles.
2. The SM-SR retrieves the PLMA applying to the identifier sent in the request.
3. The SM-SR return the corresponding PLMA to the requesting Operator (3.a, 3.b,
3.c).NOTE:The definition of needed identifier to retrieve PLMA applying to a set of eUICCs and/or Profiles is out of scope of this specification.
End Condition: The Operator has received the PLMA according to input parameters the Operator has provided in the request. An Operator is able to send the retrieve PLMA request for its own Profiles only.
3.5.15.3 Retrieve Profile Lifecycle Management Authorisation– by M2M SP
With this procedure, the M2M SP retrieves the PLMA the Operator has set on the SM-SR. @startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “M2M SP” as SP #FFFFFF Participant “SM-SR” as SR #FFFFFF
SP->SR: [1] Retrieve PLMA (Operator ID, \nIdentifier)
SR->SP: [2] Command Result (PLMA List)
@enduml
Figure 16: Retrieve Profile Lifecycle Management Authorisation by M2M SPStart
Condition:
a. The M2M SP opened a dedicated interface with the SM-SR to be able to retrieve its
own PLMA.b. PLMA MAY exist in the SM-SR.
Procedure:
1. An M2M SP who wants to retrieve PLMA applying to a set of Operator owned
Profiles, sends a PLMA request to the SM-SR, managing those eUICCs having
the targeted Operator Profiles installed
It SHALL be possible for the M2M SP to set in the request the Operator ID
only and / or any identifier pointing to a set of eUICCs and/or Profiles.
2. The SM-SR return the corresponding PLMA to the requesting M2M SP.NOTE:The definition of needed identifier to retrieve PLMA applying to a set of eUICCs and/or Profiles is out of scope of this specification.
End Condition: The M2M SP has received the PLMA according to the input parameter the M2M SP has provided in the request.
An M2M SP is able to retrieve PLMA only for Profiles it has authorisations for. An M2M SP is able to send the retrieve PLMA request only for its own eUICCs.
3.5.15.4 Delete Profile Lifecycle Management Authorisation
The delete PLMA requests comprises the following steps: @startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “M2M SP” as SP #FFFFFF Participant “Operator” as OP #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF
Alt [via SM-SR] OP->SR: [1.a] Delete PLMA (M2M SP ID, Identifier)
Rnote over SR #FFFFFF [2] PLMA deletion endrnote
SR->OP: [3.a] Delete PLMA Report (Operator ID, Identifier)
Else [via SM-DP] OP->DP: [1.b] Delete PLMA (M2M SP ID, Identifier)
Rnote over DP #FFFFFF Identify SM-SR Endrnote
DP<->SR: Mutual Authentication
DP->SR:[1.c] Delete PLMA (M2M SP ID, Identifier)
Rnote over SR #FFFFFF [2] PLMA deletion endrnote
SR->DP: [3.b] Delete PLMA Report (Operator ID, Identifier)
DP->OP: [3.c] Delete PLMA Report (Operator ID, Identifier)
end
SR->SP: [3.d] Delete PLMA Report (Operator ID, Identifier)
@enduml
Figure 17: Delete Profile Lifecycle Management Authorisation
Start Condition:
a. The Operator opened a dedicated interface with the SM-SR, either directly or
through its SM-DP, for PLMA management.
b. PLMA exists in the SM-SR.Procedure:
1. An Operator whose Profile is resident on a set of eUICCs sends a PLMA request
to the SM-SR managing those eUICCs, either directly (1.a) or through its SM-DP
(1.b, 1.c), to delete PLMA.
It SHALL be possible for the Operator to set in the request only the M2M
SP ID and / or any identifier pointing to a set of eUICCs and/or Profiles.
2. The SM-SR deletes the PLMA applying to the identifier sent in the request.
3. The SM-SR confirms the successful deletion of the PLMA by notifying the
requesting Operator, either directly (3.a) or through its SM-DP (3.b, 3.c), as well
as the corresponding M2M SP (3.d).End Condition: The SM-SR has deleted the Profile Lifecycle Management functionality for
the addressed M2M SP. The referenced M2M SP is no more able to manage the lifecycle of
the Operator Profile(s) for the set of eUICCs as well as to receive reports related to those
Profiles.
An Operator is able to send the delete PLMA requests only for its own Profiles.
NOTE: In case that the M2M SP has still the need to get status changes on Profiles
being resident on eUICCs it is responsible for, it is up to the Operator, owning
the Profiles on the eUICC, to forward reports about Profile status changes to
the correspondent M2M SP. This is outside of this specification.3.5.16 Profile Enabling via M2M SP
A switch between two Profiles can be achieved by the following dedicated procedure. In this case the request is issued directly by the M2M SP to the SM-SR associated with the target eUICC. To be successful, the authorisation for the M2M SP SHALL be configured in the SM-
SR (see Profile Lifecycle Management Authorisation Registration at SM-SR chapter 3.5.15 for details). @startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “Operator” as OP #FFFFFF Participant “M2M SP” as SP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-R” as ISDR #FFFFFF Endbox
SP->SR: [1] Profile Enabling from M2M SP Request \n(M2M SP ID, EID, ICCID)
Rnote over SR #FFFFFF [2] – POL2 Check of currently Enabled Profile and Target Profile - Check of M2M SP PLMA Endrnote
SR-->SP: [3a] Conflict Report
SR-->OP: [3b] Conflict Report
SR<->ISDR: [4] Mutual Authentication
SR->ISDR: [5] Profile Enabling Request
Rnote over ISDR #FFFFFF [6] POL1 Check of currently Enabled Profile and Target Profile Endrnote
ISDR-->SR: [7] Conflict Report
SR-->SP: [8a] Conflict Report
SR->OP: [8b] Conflict Report
Rnote over ISDR #FFFFFF [9] Currently Enabled Profile is Disabled. Target Profile is Enabled Endrnote
ISDR->SR: [10] Profile Switch Confirmation
Rnote over SR #FFFFFF [11] EIS Update: Target Profile is now Enabled. Previously Profile is Disabled Endrnote
SR->SP: [12] Profile Switch Result
opt SR-->OP: [13] Profile Switch Result end
@enduml
Figure 18: Profile Enabling via M2M SP
Start Conditions:
a. The target Profile is disabled on the eUICC. Another Profile is enabled.
b. The Subscription associated with the target Profile is active in the Operator’s
network.
c. The EID of the target eUICC, the SRID associated with the target Profile and the
ICCID of the target Profile are known by the M2M SP.Procedure:
1. The M2M SP sends a Profile Enabling from M2M SP request to the SM-SR. The
request includes the target EID and the ICCID of the target Profile.
2. The SM-SR checks if the POL2 of both the currently Enabled Profile and the target
Profile permit the Profile switch to take place. The SM-SR checks if the M2M SP has
the authorisations to enable the targeted Profile.
3. If there is a conflict with POL2 or with the M2M SP authorisations, the SM-SR aborts
the procedure and MAY inform the M2M SP. In addition the SM-SR MAY inform the
corresponding Operator(s) accordingly.
4. The SM-SR and the eUICC, using the key set in the ISD-R, authenticate each other if
not already authenticated. 5. If there is no conflict with POL2, the SM-SR issues a Profile Enabling request to the
ISD-R on the eUICC including at least the ISD-P AID of the target Profile.
6. The eUICC performs a POL1 check.
7. If there is a conflict with POL1, the ISD-R aborts the procedure and informs the SM-
SR.
8. In addition the SM-SR MAY inform the concerned M2M SP and Operator(s)
accordingly.
9. If there is no conflict with POL1, the ISD-R performs the Profile switch resulting in the
target Profile being enabled and the previously Enabled Profile being disabled.
10. The ISD-R reports the Profile switch result to the SM-SR.
11. If the switch is successful the SM-SR records in the EIS that the target Profile is
enabled and the previous Profile is disabled.
12. The SM-SR reports the Profile switch result back to the M2M SP.
13. The SM-SR SHALL report the Profile switch result back to the Operator(s) if requested
by the Operator(s). These messages will include the M2M SP OID, the EID and the
ICCID of their targeted Profiles.
End Condition: The target Profile is enabled on the eUICC. The previously Enabled Profile
is disabled. The EIS is up to date.3.5.17 Profile Disabling via M2M SP
Profile disabling can be achieved by the following procedure. In this case the request is issued directly by the M2M SP to the SM-SR associated with the target eUICC. To be successful, the authorisation for the M2M SP SHALL be configured in the SM-SR (see Profile Lifecycle Management Authorisation Registration at SM-SR chapter 3.5.15 for details). @startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “Operator” as OP #FFFFFF Participant “M2M SP” as SP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-R” as ISDR #FFFFFF Endbox
SP->SR: [1] Profile Disabling from M2M SP Request \n(M2M SP ID, EID, ICCID)
Rnote over SR #FFFFFF [2] – Check of Fall-Back Attribute set [3] - POL2 Check of currently Enabled Profile - Check of M2M SP PLMA Endrnote
SR-->SP: [4a] Conflict Report
SR-->OP: [4b] Conflict Report
SR<->ISDR: [5] Mutual Authentication
SR->ISDR: [6] Profile Disabling Request
Rnote over ISDR #FFFFFF [7] POL1 Check of currently Enabled Profile endrnote
ISDR-->SR: [8] Conflict Report
SR-->SP: [9a] Conflict Report
SR-->OP: [9b] Conflict Report
Rnote over ISDR #FFFFFF [10] - Currently Enabled Profile is Disabled - Fall-Back Profile is Enabled endrnote
ISDR->SR: [11] Disabling Profile Confirm ation
Rnote over SR #FFFFFF [12] EIS update: Target Profile is Disabled Endrnote
SR->SP: [13] Profile Disabling Result
Opt SR-->OP: [14] Profile Disabling Result end
@enduml
Figure 19: Profile Disabling via M2M SP
Start Conditions: The target Profile is enabled on the eUICC.
Procedure:
1. The M2M SP sends a Profile Disabling from M2M SP request to the SM-SR. The
request includes the target EID and the ICCID of the target Profile.
2. If the target Profile for disabling is the Profile with Fall-Back Attribute set then the
Profile disabling SHALL NOT be executed.
3. The SM-SR checks if the POL2 of the Enabled Profile permits the Profile to be
disabled. The SM-SR checks if the M2M SP has the authorisations to disable the
targeted Profile
4. If there is a conflict with POL2 or with the M2M SP authorisations, the SM-SR aborts
the procedure and MAY inform the M2M SP. In addition the SM-SR MAY inform the
corresponding Operator accordingly.
5. The SM-SR and the eUICC, using the key set in the ISD-R, authenticate each other
if not already authenticated.6. If there is no POL2 conflict, the SM-SR issues a Profile enabling request to the ISD-
R on the eUICC for the Profile with Fall-Back Attribute set.
7. The eUICC performs an internal POL1 check for the currently Enabled Profile.
8. If there is a conflict with POL1, the ISD-R aborts the procedure and informs the SM-
SR.
9. In addition the SM-SR MAY inform the corresponding M2M SP and Operator
accordingly.
10. If permitted, the Enabled Profile is disabled and the ISD-R enables the Profile with
Fall-Back Attribute set.
11. The ISD-R sends reports of the Profile disabling result to the SM-SR.
12. If the disabling is successful the SM-SR records in the EIS that the target Profile is
disabled.
13. The SM-SR reports the Profile disabling result back to the M2M SP.
14. The SM-SR SHALL report the Profile disabling result back to the Operator(s) if
requested by the Operator(s). These messages will include the M2M SP OID, the
EID and the ICCID of their targeted Profiles.End Condition: The target Profile is now disabled on the eUICC, and the Profile with Fall- Back Attribute set is enabled.
3.5.18 ISD-P Deletion via M2M SP
A Profile can be deleted by the following procedure. In this case the request is issued directly by the M2M SP to the SM-SR associated with the target eUICC. To be successful, the authorisation for the M2M SP SHALL be configured in the SM-SR (see Profile Lifecycle Management Authorisation Registration at SM-SR chapter 3.5.15 for details). @startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “Operator” as OP #FFFFFF Participant “M2M SP” as SP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-R” as ISDR #FFFFFFEndbox
SP->SR: [1] ISD-P Deletion Request\n(M2M SP ID, EID, ICCID)
rnote over SR #FFFFFF [2] POL2 Check, PLMA endrnote
SR-->SP: [3a] Error
SR-->OP: [3b] Error
rnote over SR #FFFFFF [4] If Target Profile is Enabled, SM -SR starts Profile Disabling Procedure endrnote
SR<->ISDR: [5] Authentication
SR->ISDR: [6] ISD-P Deletion Request\n(ISD-P-AID)
rnote over ISDR #FFFFFF [7] POL1 Check endrnote
ISDR-->SR: [8] POL1 Conflict
SR-->SP: [9a] POL1 Conflict
SR-->OP: [9b] POL1 Conflict
rnote over ISDR #FFFFFF [10] eUICC Deletes the Profile and related ISD-P endrnote
ISDR->SR: [11] ISD-P Deletion Report
rnote over SR #FFFFFF [12] EIS Update endrnote
SR->SP: [13] ISD-P Deletion Report\n(M2M SP ID, EID, ICCID)
opt SR->OP: [14] ISD-P Deletion Report\n(M2M SP ID, EID, ICCID) end
@enduml
Figure 20: ISD-P Deletion via M2M SP
Start Conditions: The M2M SP decides to permanently delete a Profile on a eUICC.
Procedure:
1. The M2M SP sends an ISD-P Deletion from M2M SP request to the SM-SR. The
request includes the target EID and the ICCID of the targeted Profile.
2. The SM-SR checks the POL2 of the target Profile. The SM-SR checks if the M2M
SP has the authorisations to delete the targeted Profile 3. If there is a conflict with POL2 or with the M2M SP authorisations, the SM-SR aborts
the procedure and MAY inform the M2M SP. In addition the SM-SR MAY inform the
corresponding Operator accordingly.
4. If the target Profile is enabled, the SM-SR starts the Profile Disabling procedure.
5. The SM-SR and the eUICC, using the key set in the ISD-R, authenticate each other
if not already authenticated.
6. The SM-SR sends the ISD-P Deletion request to the ISD-R on the eUICC. The
request includes the ISD-P AID of the targeted Profile.
7. The eUICC performs a POL1 check.
8. If there is a conflict with POL1, the ISD-R aborts the procedure and informs the SM-
SR.
9. In addition the SM-SR MAY inform the corresponding M2M SP and Operator
accordingly.
10. If there is no conflict, the ISD-R then erases the targeted Profile and the related ISD-
P.
11. The ISD-R sends reports of the ISD-P deletion result to the SM-SR.
12. If the ISD-P deletion is successful the SM-SR updates the EIS appropriately
13. The SM-SR reports the ISD-P deletion result back to the M2M SP.
14. The SM-SR SHALL report the ISD-P deletion result back to the Operator(s) if
requested by the Operator(s). These messages will include the M2M SP OID, the
EID and the ICCID of the deleted Profile.
End Condition: The target Profile is deleted from the eUICC. The EIS in the SM-SR is up to
date.3.5.19 Fall-Back Attribute Management
This procedure contains the steps needed to change the Fall-Back Attribute from one Profile
to another.
The Operator1 owning the Profile that currently has the Fall-Back Attribute set and the
Operator2 that wants to set the Fall-Back Attribute on its own Profile need to have an
agreement. This agreement is materialised by the Operator1 settings a PLMA where it MAY
grant Operator2 the authorisation to unset the Fall-Back Attribute on its Operator1 Profile as
a consequence of setting the Fall-Back Attribute on the Operator 2 Profile by Operator 2.
NOTE: There is no operation that explicitly un-sets the Fall-Back Attribute on a Profile.
The Fall-Back Attribute is only un-set as the consequence of setting the Fall-
Back Attribute on another Profile.
@startuml
skinparam monochrome true
skinparam ArrowColor Blackhide footbox
Participant “M2M SP” as SP #FFFFFF Participant “Operator 1\n<size:10>(owning Profile A)</size>” as OP1 #FFFFFF Participant “Operator 2\n<size:10>(owning Profile B)</size>” as OP2 #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF
Alt [via SM-SR]
OP2->SR: [1.a] Set Fall-Back Attribute\non Profile B Request
Else [via SM-DP] OP2->DP: [1.b] Set Fall-Back Attribute\non Profile B Request
Rnote over DP #FFFFFF Identify SM-SR Endrnote
DP<->SR: Mutual Authentication
DP->SR: [1.c] Set Fall-Back Attribute\non Profile B Request
end
Rnote over SR #FFFFFF [2] Check PLMA Endrnote
SR-->OP2: [2.a] report PLMA conflict SR->EUICC: [3] Set Fall-Back Attribute\non Profile B
Rnote over EUICC #FFFFFF [4] Unset Fall-Back Attribute on Profile A by Setting Fall-Back Attribute on Profile B Endrnote
EUICC->SR: [5] Set Fall-Back Attribute Report
Rnote over SR #FFFFFF [6] EIS Update Endrnote
SR->OP1: [7] Unset Fall-Back Attribute Report of Profile A
SR->OP2: [8] Set Fall-Back Attribute Report of Profile B
Opt [If if requested by Operator 1] SR->SP: [9] Unset Fall-Back Attribute Report of Profile A End
Opt [If if requested by Operator 2] SR->SP: [10] Set Fall-Back Attribute Report of Profile B end
@enduml
Figure 21: Fall-Back Attribute Management
Start Conditions:
a. Profile A with Fall-Back Attribute set.
b. Profile B, targeted to have the Fall-Back Attribute set, present on the eUICC.
c. Profile A owner Operator1 has configured a PLMA authorizing Operator2 to unset the
Fall-Back Attribute on Profile A.
Procedure:
1. The Operator2 owning Profile B requests setting of the Fall-Back Attribute on Profile
B to the SM-SR, either directly (1.a) or through its SM-DP (1.b, 1.c).
2. The SM-SR checks if Operator1 has configured a PLMA authorizing Operator2 to
unset the Fall-Back Attribute on Profile A.
a. If there is a conflict with the authorisation, the SM-SR aborts the procedure
and informs the Operator 2.
3. The SM-SR, by calling Set Fall-Back Attribute function, requests the eUICC to set the
Fall-Back Attribute to the Profile B.
4. The eUICC performs the operation. This will remove the Fall-Back Attribute from
Profile A.
5. The eUICC reports the status of the Set Fall-Back operation to the SM-SR
6. The SM-SR update the EIS accordingly.
7. The SM-SR reports to the Operator1 owning the Profile A that the Fall-Back Attribute
has been unset on its Profile.
8. The SM-SR reports to Operator2 that Profile B now has the Fall-Back Attribute set.
9. The SM-SR SHALL report to the M2M SP that the Profile A has the Fall-Back Attribute
unset, if requested by the Operator1 during PLMA registration (see 3.5.155).
10. The SM-SR SHALL report to the M2M SP that the Profile B has the Fall-Back Attribute
set, if requested by the Operator2 during PLMA registration (see 3.5.155).
End Conditions:The Profile B has the Fall-Back Attribute set. The Profile A has the Fall-Back Attribute unset.
3.5.20 Fall-Back Attribute Management via the M2M SP
Operators MAY also authorise an M2M SP to change the Fall-Back Attribute from one Profile
to another. This procedure contains the steps needed to execute such an operation.
The Operator1 owning the Profile that currently has the Fall-Back Attribute set and the
Operator2 that agree to have the Fall-Back Attribute set on its own Profile need to have an
agreement with the M2M SP. This agreement is materialised by the Operator2 and Operator1
settings PLMAs where they MAY grant the M2M SP the authorisation to set or unset the Fall-
Back Attribute on their respective Profile.
NOTE: There is no operation that explicitly un-sets the Fall-Back Attribute on a Profile.
The Fall-Back Attribute is only unset as the consequence of setting the Fall-
Back Attribute on another Profile.@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “M2M SP” as SP #FFFFFF Participant “Operator 1\n<size:10>(owning Profile A)</size>” as OP1 #FFFFFF Participant “Operator 2\n<size:10>(owning Profile B)</size>” as OP2 #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF
SP->SR: [1] Set Fall-Back Attribute on Profile B Request
Rnote over SR #FFFFFF [2] Check PLMA for Setting Fall-Back Attribute from Operator 2 Endrnote SR-->SP: [2.a] report PLMA conflict Rnote over SR #FFFFFF [3] Check PLMA for Unsetting Fall -Back Attribute from Operator 1 Endrnote SR-->SP: [3.a] report PLMA conflict
SR->EUICC: [4] Set Fall-Back Attribute on Profile B
Rnote over EUICC #FFFFFF [5] Unset Fall-Back Attribute on Profile A by Setting Fall-Back Attribute on Profile B Endrnote
EUICC->SR: [6] Set Fall-Back Attribute Report
Rnote over SR #FFFFFF [7] EIS Update Endrnote
SR->OP1: [8] Unset Fall-Back Attribute Report of Profile A
SR->OP2: [9] Set Fall-Back Attribute Report of Profile B
SR->SP: [10] Set Fall-Back Attribute Report of Profile B
@enduml
Figure 22: Fall-Back Attribute Management via M2M SP
Start Conditions:
a. Profile A with Fall-Back Attribute set.
b. Profile B, targeted to have the Fall-Back Attribute set, present on the eUICC.
c. Profile A owner Operator1 has configured a PLMA authorizing the M2M SP to unset
the Fall-Back Attribute.
d. Profile B owner Operator2 has configured a PLMA authorising the M2M SP to set the
Fall-Back Attribute.
Procedure:
1. The M2M SP requests setting of the Fall-Back Attribute on Profile B to the SM-SR.
2. The SM-SR checks if a PLMA from Operator2 authorises the M2M SP to set the Fall-
Back Attribute on Profile B.
a) If there is a conflict with the authorisation, the SM-SR aborts the procedure
and informs the M2M SP.3. The SM-SR checks if a PLMA from Operator1 authorises the M2M SP to unset the
Fall-Back Attribute on Profile A.
a) If there is a conflict with the authorisation, the SM-SR aborts the procedure
and informs the M2M SP. 4. The SM-SR, by calling Set Fall-Back Attribute function, requests the eUICC to set the
Fall-Back Attribute to the Profile B.
5. The eUICC Sets the Fall-Back Attribute on the Profile B. This will remove the Fall-
Back Attribute from Profile A.
6. The eUICC sends a report of the operation to the SM-SR
7. The SM-SR update the EIS accordingly.
8. The SM-SR reports to the Operator1 that Profile A now has the Fall-Back Attribute
unset.
9. The SM-SR reports to Operator2 that Profile B now has the Fall-Back Attribute set.
10. The SM-SR reports to the M2M SP that the Fall-Back Attribute is now set in Profile B.
End Conditions:The Profile B has the Fall-Back Attribute set. The Profile A has the Fall-Back Attribute unset.
3.5.21 Emergency Profile Attribute Management
Under certain circumstances, it MAY be necessary to set the Emergency Profile Attribute for
a Profile when no other Profile has the Emergency Profile Attribute set (case 1), or, a change
regarding the Profile that has the Emergency Profile Attribute set is needed (case 2). This
procedure contains the steps needed to execute such operations. For case 2. the Operator1
owning the Profile that currently has the Emergency Profile Attribute set and the Operator2
that wants to set the Emergency Profile Attribute on its own Profile need to have an
agreement. This agreement is materialised by the Operator1 settings a PLMA where it MAY
grant Operator2 the authorisation to unset the Emergency Profile Attribute on this Operator1
Profile.
NOTE: There is no operation that explicitly unsets the Emergency Profile Attribute on
a Profile. The Emergency Profile Attribute is only unset as a consequence of
setting the Emergency Profile Attribute on another Profile.For case 1 the procedure below applies:
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “M2M SP” as SP #FFFFFF Participant “Operator 1\n<size:10>(owning Profile A)</size>” as OP1 #FFFFFF Participant “Operator 2\n<size:10>(owning Profile B)</size>” as OP2 #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF
Alt [via SM-SR] OP2->SR: [1.a] Set Emergency Profile Attribute\non Profile B Request
Else [via SM-DP] OP2->DP: [1.b] Set Emergency Profile Attribute\non Profile B Request
Rnote over DP #FFFFFF Identify SM-SR Endrnote
DP<->SR: Mutual Authentication
DP->SR: [1.c] Set Emergency Profile Attribute\non Profile B Request
end
SR->EUICC: [2] Set Emergency Profile Attribute\non Profile B
Rnote over EUICC #FFFFFF [3a] Verify if Profile B has not set Fall -Back Attribute Endrnote EUICC-->SR: [3.a] report error
Rnote over EUICC #FFFFFF [3b] Set Emergency Profile Attribute on Profile B Endrnote
EUICC->SR: [4] Set Emergency Profile Attribute Report
Rnote over SR #FFFFFF
[5] EIS Update Endrnote
SR->OP2: [6] Set Emergency Profile Attribute Report of Profile B
SR->OP1
Opt [If if requested by Operator 2] SR->SP: [7] Set Emergency Profile Attribute Report of Profile B end @enduml
Figure 23: Emergency Profile Attribute Management (case 1)
Start Conditions (case 1):
a. No Profile with Emergency Profile Attribute set exists.
b. Profile B, targeted to have the Emergency Profile Attribute set, present on the eUICC
and disabled
c. Profile B does not have the Fall-Back Attribute set.
Procedure (case 1):
1. The Operator2 owning Profile B requests setting of the Emergency Profile Attribute on
Profile B to the SM-SR, either directly (1.a) or through its SM-DP (1.b, 1.c).
2. The SM-SR, by calling Set Emergency Profile Attribute function, requests the eUICC
to set the Emergency Profile Attribute to the Profile B.
3. The eUICC verifies that Profile B does not have the Fall-Back Attribute set (3a) and
performs the operation (3b).
a. If the conditions (3a) is not true, the eUICC aborts the procedure and reports
an error to the SM-SR.
4. The eUICC reports the status of the Set Emergency Profile Attribute operation to the
SM-SR
5. The SM-SR updates the EIS accordingly.
6. The SM-SR reports to all Operators, having a Profile on this eUICC, that a Profile now
has the Emergency Profile Attribute set. This report MAY include the Profile ID.
7. The SM-SR SHALL report to the M2M SP that the Profile B has the Emergency Profile
Attribute set, if requested by the Operator2 during PLMA registrations (see 3.5.155).End Conditions (case 1): The Profile B has the Emergency Profile Attribute set.
For case 2 the procedure below applies
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “M2M SP” as SP #FFFFFF Participant “Operator 1\n<size:10>(owning Profile A)</size>” as OP1 #FFFFFF Participant “Operator 2\n<size:10>(owning Profile B)</size>” as OP2 #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF
Alt [via SM-SR] OP2->SR: [1.a] Set Emergency Profile Attribute\non Profile B Request
Else [via SM-DP] OP2->DP: [1.b] Set Emergency Profile Attribute\non Profile B Request
Rnote over DP #FFFFFF Identify SM-SR Endrnote
DP<->SR: Mutual Authentication
DP->SR: [1.c] Set Emergency Profile Attribute \non Profile B Request
end
Rnote over SR #FFFFFF [2] Check PLMA for Set Emergency Profile Attribute for Operator 2 Endrnote
SR-->OP2: [2.a] report authorisation conflict SR->EUICC: [3] Set Emergency Profile Attribute\non Profile B
Rnote over EUICC #FFFFFF [4a] Verify if Profile B has not set Fall -Back Attribute Endrnote EUICC-->SR: [4.a] report error
Rnote over EUICC #FFFFFF [4b] Unset Emergency Profile Attribute on Profile A by Setting Emergency Profile Attribute on Profile B Endrnote
EUICC->SR: [5] Set Emergency Profile Attribute Report
Rnote over SR #FFFFFF [6] EIS Update Endrnote
SR->OP2: [7] Set Emergency Profile Attribute Report of Profile B
SR->OP1
Opt [If if requested by Operator 1] SR->SP: [8] Unset Emergency Profile Attribute Report of Profile A End
Opt [If if requested by Operator 2] SR->SP: [9] Set Emergency Profile Attribute Report of Profile B end @enduml
Figure 24: Emergency Profile Attribute Management (case 2)
Start Conditions (case 2):
a. Profile A with Emergency Profile Attribute set.
b. Profile B, targeted to have the Emergency Profile Attribute set, present on the eUICC.
c. Profile A owner Operator1 has configured a PLMA authorizing Operator2 to unset the
Emergency Profile Attribute on Profile A.
Procedure (case 2):
1. The Operator2 owning Profile B requests setting of the Emergency Profile Attribute on
Profile B to the SM-SR, either directly (1.a) or through its SM-DP (1.b, 1.c).
2. The SM-SR checks if Operator2 has PLMA configured to unset the Emergency Profile
Attribute from the Operator1 owning the Profile that currently has the Emergency
Profile Attribute set.
a. If there is a conflict with the authorisation, the SM-SR aborts the procedure
and informs the Operator 2.
3. The SM-SR, by calling Set Emergency Profile Attribute function, requests the eUICC
to set the Emergency Profile Attribute to the Profile B.
4. The eUICC verifies that Profile B does not have the Fall-Back Attribute set (4a) and
performs the operation (4b). This will remove the Emergency Profile Attribute from
Profile A.
a. If the conditions (4a) is not true, the eUICC aborts the procedure and reports
an error to the SM-SR.
5. The eUICC reports the status of the Set Emergency Profile Attribute operation to the
SM-SR
6. The SM-SR updates the EIS accordingly. 7. The SM-SR reports to all Operators, having a Profile on this eUICC, that another
Profile now has the Emergency Profile Attribute set. This report MAY include the
Profile ID.
8. The SM-SR SHALL report to the M2M SP that the Profile A has the Emergency Profile
Attribute unset, if requested by the Operator1 during PLMA registrations (see 3.5.155).
9. The SM-SR SHALL report to the M2M SP that the Profile B has the Emergency Profile
Attribute set, if requested by the Operator2 during PLMA registrations (see 3.5.155).
End Conditions (case 2):
The Profile A has the Emergency Profile Attribute unset. The Profile B has the Emergency
Profile Attribute set.3.5.22 Emergency Profile Attribute Management via the M2M SP
Operators MAY also authorise an M2M SP to change which Profile has the Emergency Profile Attribute set. Under certain circumstances, it MAY be necessary to set the Emergency Profile Attribute for a Profile when no other Profile has the Emergency Profile Attribute set (case 1), or, a change regarding the Profile that has the Emergency Profile Attribute set is needed (case 2). This procedure contains the steps needed to execute such operations. For case 1 the Operator2 that agrees to have the Emergency Profile Attribute set on its own Profile need to have an agreement with the M2M SP. This agreement is materialised by the Operator2 setting PLMAs where Operator2 MAY grant the M2M SP the authorisation to set the Emergency Profile Attribute on its respective Profile. For case 2. the Operator1 owning the Profile that currently has th e Emergency Profile Attribute set and the Operator2 that agree to have the Emergency Profile Attribute set on its own Profile need to have an agreement with the M2M SP. This agreement is materialised by the Operator2 and Operator1 setting PLMAs where Operator2 MAY grant the M2M SP the authorisation to set the Emergency Profile Attribute on its respective Profile and where Operator1 MAY grant the M2M SP the authorisation to un-set the Emergency Profile Attribute on its respective Profile.
NOTE:There is no operation that explicitly unsets the Emergency Profile Attribute on a Profile. The Emergency Profile Attribute is only unset as a consequence of setting the Emergency Profile Attribute on another Profile.
For case 1 the procedure below applies:
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “M2M SP” as SP #FFFFFF Participant “Operator 1\n<size:10>(owning Profile A)</size>” as OP1 #FFFFFF Participant “Operator 2\n<size:10>(owning Profile B)</size>” as OP2 #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF
SP->SR: [1] Set Emergency Profile Attribute on Profile B Request
Rnote over SR #FFFFFF
[2] Check PLMA for Setting Emergency Profile Attribute from Operator 2 Endrnote SR-->SP: [2.a] report authorisation conflict
SR->EUICC: [3] Set Emergency Profile Attribute on Profile B
Rnote over EUICC #FFFFFF [4a] Verify if Profile B has not set Fall -Back Attribute Endrnote EUICC-->SR: [4.a] report error
Rnote over EUICC #FFFFFF [4b] Set Emergency Profile Attribute on Profile B Endrnote
EUICC->SR: [5] Set Emergency Profile Attribute Report
Rnote over SR #FFFFFF [6] EIS Update Endrnote
SR->OP2: [7] Set Emergency Profile Attribute Report of Profile B
SR->OP1
SR->SP: [8] Set Emergency Profile Attribute Report of Profile B @enduml
Figure 25: Emergency Profile Attribute Management via M2M SP (case 1)
Start Conditions:
a. Profile B, targeted to have the Emergency Profile Attribute set, present on the eUICC.
b. Profile B owner Operator2 has configured a PLMA authorizing the M2M SP to set the
Emergency Profile Attribute.
Procedure:
1. The M2M SP requests setting of the Emergency Profile Attribute on Profile B to the
SM-SR.
2. The SM-SR checks if a PLMA from Operator2 that authorises the M2M SP to set the
Emergency Profile Attribute on Profile B is configured
a. If there is a conflict with the authorisation, the SM-SR aborts the procedure
and informs the M2M SP. 3. The SM-SR, by calling Set Emergency Profile Attribute function, requests the eUICC
to set the Emergency Profile Attribute to the Profile B.
4. The eUICC verifies that Profile B does not have the Fall-Back Attribute set (4a) and
then sets the Emergency Profile Attribute to the Profile B (4b).
a. If the conditions (4a) is not true, the eUICC aborts the procedure and reports
an error to the SM-SR.
5. The eUICC sends a report of the operation to the SM-SR
6. The SM-SR updates the EIS accordingly.
7. The SM-SR reports to all Operators, having a Profile on this eUICC, that a Profile now
has the Emergency Profile Attribute set. This report MAY include the Profile ID.
8. The SM-SR reports to the M2M SP that the Emergency Profile Attribute is now set for
Profile B.
End Conditions:
The Profile B has the Emergency Profile Attribute set.For case 2 the procedure below applies:
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “M2M SP” as SP #FFFFFF Participant “Operator 1\n<size:10>(owning Profile A)</size>” as OP1 #FFFFFF Participant “Operator 2\n<size:10>(owning Profile B)</size>” as OP2 #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF
SP->SR: [1] Set Emergency Profile Attribute on Profile B Request
Rnote over SR #FFFFFF [2] Check PLMA for Setting Emergency Profile Attribute from Operator 2 Endrnote SR-->SP: [2.a] report authorisation conflict Rnote over SR #FFFFFF [3] Check PLMA for Unsetting Emergency Profile Attribute from Operator 1 Endrnote SR-->SP: [3.a] report authorisation conflict
SR->EUICC: [4] Set Emergency Profile Attribute on Profile B
Rnote over EUICC #FFFFFF [5a] Verify if Profile B has not set Fall -Back Attribute Endrnote EUICC-->SR: [5.a] report error
Rnote over EUICC #FFFFFF [5b] Unset Emergency Profile Attribute on Profile A by Setting Emergency Profile Attribute on Profile B Endrnote
EUICC->SR: [6] Set Emergency Profile Attribute Report
Rnote over SR #FFFFFF [7] EIS Update Endrnote
SR->OP2: [8] Set Emergency Profile Attribute Report of Profile B
SR->OP1
SR->SP: [9] Set Emergency Profile Attribute Report of Profile B @enduml
Figure 26: Emergency Profile Attribute Management via M2M SP (case 2)
Start Conditions:
a. Profile A with Emergency Profile Attribute set.
b. Profile B, targeted to have the Emergency Profile Attribute set, present on the eUICC.
c. Profile A owner Operator1 has configured a PLMA authorizing the M2M-SP to unset
the Emergency Profile Attribute.
d. Profile B owner Operator2 has configured a PLMA authorizing the M2M-SP to set the
Emergency Profile Attribute.
Procedure:
1. The M2M SP requests setting of the Emergency Profile Attribute on Profile B to the
SM-SR.
2. The SM-SR checks if a PLMA from Operator2 that authorises the M2M SP to set the
Emergency Profile Attribute on Profile B is configured.
a. If there is a conflict with the authorisation, the SM-SR aborts the procedure
and informs the M2M SP.
3. The SM-SR checks if a PLMA from Operator1 that authorises the M2M SP to unset
the Emergency Profile Attribute on Profile A is configured.
a. If there is a conflict with the authorisation, the SM-SR aborts the procedure
and informs the M2M SP.
4. The SM-SR, by calling Set Emergency Profile Attribute function, requests the eUICC
to set the Emergency Profile Attribute to the Profile B.
5. The eUICC verifies that Profile B does not have the Fall-Back Attribute set (5a) and
then sets the Emergency Profile Attribute to the Profile B (5b). This will remove the
Emergency Profile Attribute from Profile A.
a. If the conditions (5a) is not true, the eUICC aborts the procedure and reports
an error to the SM-SR.
6. The eUICC sends a report of the operation to the SM-SR
7. The SM-SR updates the EIS accordingly.8. The SM-SR reports to all Operators, having a Profile on this eUICC, that another Profile now has the Emergency Profile Attribute set. This report MAY include the Profile ID. 9. The SM-SR reports to the M2M SP that the Emergency Profile Attribute is now set for Profile B.
End Conditions: The Profile A has the Emergency Profile Attribute unset. The Profile B has the Emergency Profile Attribute set.
3.5.23 Local Enable of the Test Profile
A switch from Operational Profile to the Test Profile can be achieved by the following dedicated procedure. The request is issued directly from the Device to the eUICC. @startuml skinparam monochrome true skinparam ArrowColor Black skinparam maxmessagesize 450 skinparam ParticipantPadding 100 skinparam sequenceArrowThickness 1
hide footbox
participant “Device” as DEV #FFFFFF participant “eUICC” as EUICC #FFFFFF
DEV->EUICC: [1] Local Enabling request
rnote over EUICC #FFFFFF [2] Verify that the Test Profile exists endrnote
EUICC-->DEV: Error
rnote over EUICC #FFFFFF [3] Verify that the currently Enabled Profile is NOT the Emergency Profile
endrnote
EUICC-->DEV: Error
rnote over EUICC #FFFFFF [4] Verify that the currently Enabled Profile is NOT the Test Profile endrnote
EUICC-->DEV: Error
group Profile switch
rnote over EUICC #FFFFFF [5] Enable Test Profile endrnote
EUICC->DEV: [6] Profile Enabling Result
EUICC->DEV: [7] REFRESH
end
@enduml
Start Conditions: An Operational Profile is enabled.
Procedure:
1. The Device sends a Local Enable request to the eUICC.
2. The eUICC performs a verification that the Test Profile is present in the eUICC,
sending an Error in case no Test Profile exists.
3. The eUICC verifies that the currently Enabled Profile is not the Emergency Profile, if
it is the Emergency Profile, the eUICC aborts the procedure sending an error.
4. The eUICC verifies that the currently Enabled Profile is not the Test Profile; if it is the
Test Profile, the eUICC aborts the procedure sending an error.
5. The eUICC Enables the Test Profile without enforcing POL1.
6. The eUICC sends the Profile Enabling result to the Device.
7. The eUICC sends a REFRESH proactive command in UICC reset mode to the Device.End Condition: The Test Profile is enabled on the eUICC. The previously enabled Operational Profile is disabled.
3.5.24 Local Disable of the Test Profile
Local Disable can be achieved by the following procedure. The request is issued directly by the Device to the eUICC. @startuml
skinparam monochrome true skinparam ArrowColor Black skinparam maxmessagesize 450 skinparam ParticipantPadding 100 skinparam sequenceArrowThickness 1
hide footbox
participant “SM-SR” as SR #FFFFFF participant “Device” as DEV #FFFFFF participant “eUICC” as EUICC #FFFFFF
DEV->EUICC: [1] Local Disabling request
rnote over EUICC #FFFFFF [2] Verify that the currently Enabled Profile is the Test Profile endrnote
EUICC-->DEV: Error
group Profile switch rnote over EUICC #FFFFFF [3] Test Profile is Disabled and the previously Disabled Operational Profile is enabled endrnote
EUICC->DEV: [4] Profile Disabling Result EUICC->DEV: [5] REFRESH
opt EUICC->SR: [6] Profile Disabling Result end
end @enduml
Start Condition: The Test Profile is enabled on the eUICC. Procedure: 1. The Device sends a Local Disable request to the eUICC.
2. The eUICC verifies that the currently Enabled Profile is the Test Profile, if it’s not, the
eUICC aborts the procedure and sends an error.
3. The eUICC Disables the Test Profile and Enables the Previously Disabled Operational
Profile.
4. The eUICC sends the Profile Disabling result to the Device.
5. The eUICC sends a REFRESH proactive command in UICC reset mode to the Device.NOTE:In case of any error after this step, indicating that the currently Enabled Profile cannot provide connectivity, the eUICC will trigger the Fall-Back Mechanism and will ensure that the previously enabled Profile is the Profile that was enabled before the Local Enable.
6. If configured, the eUICC sends the Profile Disabling result to the SM-SR. If applicable,
the SM-SR informs the Operator and/or the M2M SP accordingly.End Condition: The Test Profile is disabled on the eUICC, and the previously Enabled Profile or the Profile with Fall-Back Attribute set is enabled.
3.5.25 Local Enable of the Emergency Profile
The following operation allows the Emergency Profile to be enabled when needed. This local operation is directly triggered by the Device. @startuml skinparam monochrome true skinparam ArrowColor Black skinparam maxmessagesize 450 skinparam ParticipantPadding 100 skinparam sequenceArrowThickness 1
hide footbox
participant “Device” as DEV #FFFFFF participant “eUICC” as EUICC #FFFFFF
DEV->EUICC: [1] Local Enabling request
rnote over EUICC #FFFFFF [2] Verify that the Emergency Profile exists endrnote
EUICC-->DEV: Error
rnote over EUICC #FFFFFF [3] Verify that the currently Enabled Profile is NOT the Emergency Profile endrnote
EUICC-->DEV: Error
group Profile switch
rnote over EUICC #FFFFFF [4] Enable Emergency Profile endrnote
EUICC->DEV: [5] Profile Enabling Result
EUICC->DEV: [6] REFRESH
end @enduml
Start Condition: A Profile is Enabled. Procedure: 1. The Device sends a Local Enable request to the eUICC for the Emergency Profile.
2. The eUICC verifies that the Emergency Profile is present in the eUICC, sending an Error in case no Emergency Profile exists.
3. The eUICC verifies that the currently Enabled Profile is not the Emergency Profile, if it is the Emergency Profile, the eUICC aborts the procedure sending an error.
4. The eUICC performs the Profile switch, without enforcing POL1, the Emergency Profile is Enabled and the Previously Enabled Profile is Disabled.
5. The eUICC sends the Profile Enabling result to the Device.
6. The eUICC sends a REFRESH proactive command in UICC reset mode to the Device. End Condition: The Emergency Profile is enabled on the eUICC. The previously enabled Profile is disabled.
3.5.26 Local Disable of the Emergency Profile
The following operation locally disables the Emergency Profile, enabling the previously Enabled Profile. @startuml skinparam monochrome true skinparam ArrowColor Black skinparam maxmessagesize 450
skinparam ParticipantPadding 100 skinparam sequenceArrowThickness 1
hide footbox
participant “SM-SR” as SMSR #FFFFFF participant “Device” as DEV #FFFFFF participant “eUICC” as EUICC #FFFFFF
DEV->EUICC: [1] Local Disabling request
rnote over EUICC #FFFFFF [2] Verify that the currently Enabled Profile is the Emergency Profile endrnote
EUICC-->DEV: Error
group Profile switch
rnote over EUICC #FFFFFF [3] Emergency Profile is Disabled and the previously Disabled Profile is Enabled endrnote
EUICC->DEV: [4] Profile Disabling Result
EUICC->DEV: [5] REFRESH
opt EUICC->SMSR: [6] Profile Disabling Result end
end
@enduml
Start Condition:
The Emergency Profile is Enabled.
Procedure:
1. The Device sends a Local Disable request to the eUICC.
2. The eUICC verifies that the currently Enabled Profile is the Emergency Profile, if it’s
not, the eUICC aborts the procedure and sends an error.
3. The eUICC Disables the Emergency Profile and Enables the previously Enabled
Profile.4. The eUICC sends the Profile Disabling result to the Device.
5. The eUICC sends a REFRESH proactive command in UICC reset mode to the Device .
NOTE: In case of any error after this step, indicating that the currently En abled Profile
cannot provide connectivity, the eUICC will trigger the Fall-Back Mechanism
and will ensure that the previously enabled Profile is the Profile that was
enabled before the Local Enable.
6. If configured, the eUICC sends the Profile Disabling result to the SM-SR. If applicable,
the SM-SR informs the Operator and/or the M2M SP accordingly.End Condition: The Emergency Profile is disabled on the eUICC and the previously Enabled Profile or the Profile with Fall-Back Attribute set is enabled.
3.6 Policy Control
3.6.1 Overview Diagram of Rule Management System
The figure below represents the Policy Rule management system:
Figure 27: Policy Rule Management System
3.6.2 Policy Rules Management
Policy control, as it relates to a Profile, is required by the Operator and is achieved through
the use of rules set by the Operator.
This Policy control is under the control (or jurisdiction) of a single Operator Policy. This Policy
MAY be comprised of sub-policies whose enforcement lies with different entities.
There are two types of rules:
POL1 – these rules resides within a Profile and would be enforced by the eUICC.
POL2 – these rules would be stored at and enforced by the SM-SR. The Operator
sends POL2 directly to the SM-SR or through the SM-DP for attaching as metadata
to a Profile.
POL1 and POL2 are representations of a common Operator Policy enforced in different
locations/entities. The combination of POL1 and POL2 represent the contract between an
Operator and a Subscriber as applied to the Profile.In this section all commands are considered as being updates; in the first instance when a rule is first established is considered a special case of update.
3.6.2.1 SM-SR Policy Rule Management Engine
The SM-SR has a Policy Rule management engine identified as “Task 1” in the diagram. Task 1 accepts the following commands: 1) Update POL2 as per Operator request 2) Update POL2 as per Operator request via SM-DP
Task 1 sets the POL2 as per the metadata supplied with a Profile from SM-DP. Task 1 enforces POL2 rules right after installation of the related Profile. Furthermore Task 1 updates the relevant EIS accordingly. The SM-SR is responsible for enforcing the POL2 rules when managing an eUICC.
3.6.2.2 SM-DP Policy Rule Management Engine
The SM-DP has a Policy Rule management engine identified as “Task 2” and “Task 4” in
the diagram.
Task 2 accepts the following commands:
1) Set POL1 as per Operator request and embed it in the Profile.
Task 4 accepts the following commands
1) “Update POL2” from the Operator, and passes it to the SM-SR for updating the EIS.
2) Set POL2 from the Operator and attach it to a Profile as metadata for transmission
to the SM-SR.3.6.2.3 eUICC Policy Rule Management Engine
The eUICC has a Policy Rule management engine identified as “Task 3” in the diagram.
Task 3 can read the POL1 rules that reside within the installed Profiles. Furthermore it enforces the POL1 rules right after the installation of the related Profile (see role of Platform Service Manager in Section 3.2.2). Task 3 accepts the following command:
1)Read/Update POL1 as per Operator request (commands are sent by the Operator’s respective OTA system).
3.6.2.4 OTA Policy Rule Update Mechanism
For Task 5 the Operator OTA Platform is used. In this case it is accepting POL1 update commands from the Operator Rule Maker and issues POL1 updates to the eUICC.
3.6.3 Policy Control Mechanism
The Policy Control Mechanism within the eUICC is a combination of:
The Policy Rules stored within the ISD-P under Operator authority;
The Policy Rules Enforcer, which is the process delivering the Policy Enforcement
Function and resides within the Platform Service Manager.
See the diagram in Section 3.2.23.6.3.1 Policy Rules
Policy Rules are checked at different state changes of Profiles. They MAY impact both the state of the Profile that is associated with the rule and the state of other Profiles. Depending on the nature of the rule, Policy enforcement can happen at the eUICC and/or at the SM-SR level. Only the Operator which is the owner of the Profile is able to modify the Policy Rules. At the eUICC level, the rules are part of the Profile package and are enforced by the eUICC operating system through the interaction with the Platform Service Manager. The Operator can update the Policy Rules within its Profile using its own OTA Platform(s). Updating can only be done when the Profile is in enabled state. The policy enforcement mechanisms defined in this document to enforce the contractual provisions governing the remote Provisioning of an Embedded SIM are subject to applicable competition and regulatory law. The following principles apply to the enforcement of contractual provisions:
Participating Operators must not abuse policy enforcement mechanisms to block or
impede in any way the legitimate installation, enabling, disabling and deletion of a
Profile on an Embedded SIM.
Participating Operators can enforce policy rules provided such actions comply with
applicable competition and regulatory law.The following Policy Rules are defined: NOTE: This assumes the SM-SR to be GSMA certified and trusted by the Operator.
Policy Rules Enforcement when the Enforced at
Profile is
1 Disabling of this Profile not Enabled eUICC via POL1
allowed SM-SR via POL2
2 Deletion of this Profile not Enabled or Disabled eUICC via POL1
allowed SM-SR via POL2 3 Profile deletion is N/A eUICC via POL1
mandatory when it is SM-SR via POL2
disabled.
POL1 and POL2 settings MAY or MAY not be the same. POL1 and POL2 are enforced by
different entities (eUICC for POL1; SM-SR for POL2) and will be enforced independently.
The explicit setting of POL1 and POL2 rules is the choice of the Operator (e.g. to set POL1
rules to be empty).3.6.3.2 eUICC Policy Rules Enforcer Function
The Policy Rules Enforcer is able to read and enforce all the POL1 present on the eUICC. The only case where the eUICC can overrule POL1 is the Fall-Back Mechanism.
3.6.3.3 SM-SR Policy Rules Enforcer Function
The SM-SR Policy Rules Enforcer is able to read and enforce the Policy Rules contained in the EIS of the targeted eUICC.
4 Security Model: Threats Analysis & Risk Assessment Model
4.1 Security Challenges
As mentioned in the basic assumptions section, one of the major expectations of this
architecture is to provide a solution offering a security level at least equivalent to the security
reached by the current UICC and its management systems.
Considering the new delivery of Profiles in the eUICC compared to the existing model, the
following main security challenges SHALL be considered and fixed in the security analysis:
a) Different Actors MAY be involved in Profile creation, load, install and enabling and be
involved in managing the eUICC during its lifecycle.
b) A Profile can be replaced in the eUICC.
c) Several Profiles MAY be hosted at a given time in the eUICC.
d) Authentication algorithms MAY be shared between operators.
e) Profile and Platform Management are controlled through rules and/or commands
which need to be considered in the assets to be protected.
f) Remote installation/Provisioning of a Profile.
g) Remote management of the Profile.
NOTE: The support of proprietary authentication algorithms and the upgradability of
authentication algorithms are for further study.
Therefore, the challenge is to deliver a solution offering a sufficient security level, but with
enough flexibility to permit interconnection of various subsystems provided by different
sources, delivering a part of, or an entire, solution.4.2 Security Analysis Methodology
Because the design of the solution for eUICC and its remote Provisioning system must be
driven by security concerns, it is of primary importance to identify the key risks on the whole
architecture in order to derive security recommendations and principles that will shape the
final design.
The proposed methodology is based on a 4 step process:
1. Identification of assets (see Annex C);
2. Identification of functions;
3. Identification of threats & risks (see Annex B);
4. Description of security requirements.4.3 Aim of the Security Realm Approach
A Security Realm is defined as the clustering of Roles and Actors connected through a single protected private network and operated by a sole entity. This entity, in charge of day to day operations of a Security Realm is defined as an “administrative entity” and might be comprised of one or several actors bound by a unique commercial or legal agreement. The segmentation in realms allows for the application of adequate protection levels related to a specific context applying to an administrative entity and its realm. This might be due to local specificities such as regulations, lawful enforcement, corporate policies or geographic context. The requirements pertaining to Security Realms also ensure for a common level of security when addressing communications between Security Realms. The security requirements applied to the Profile, Platform Management commands and Profile transport security are not addressed by Security Realms. The eUICC, being a shared asset between different administrative entities, is considered to be an independent Security Realm.
Negotiated and shared logical secured interface
Realm 1 Realm 2
Operator SMDP SMSR eUICC
Realm 3 Realm 4
Realm 5Operator SMDP SMSR
eUICCRealm 6 Realm 7 Realm 8 Realm 9
9Operator SMDP SMSR eUICC
Realm 10 Realm 11 Realm12
Operator SMDP SMSR eUICC
Realm 13 Realm 14 Realm15
SMDP MNO SMSR eUICC
Realm 16
M2M SP
Realm 17 Realm18
Operator SMSR eUICC
Realm 19 Realm20
M2M SP SMSR eUICC
Figure 28: Examples of security realms organisation in the security model
4.4 Security Requirements
This section lists security requirements.
In the security model we consider the Subscriber, Operator, M2M SP, SM-DP, SM-SR, eUICC
and EUM.
We consider the Operator, M2M SP, SM-DP, SM-SR, eUICC and EUM as elements that can
belong to a Security Realm.
The requirements section is organised in three layered parts:
General requirements, to be applied to the whole architecture, including any security
realm and its Actor(s) and role(s);
Security requirements attached to a security realm, i.e. including to all of the role(s)
attached to the security realm;
Security requirements attached to a particular role; a section is dedicated to each of
the following Roles:
o eUICC;
o SM-SR;
o SM-DP;
o Device. Role 1 Role 2 Role 3 Role 4 Device
requirement requirement requirement requirement requirements
s s Securitys realm 2 Securitys realm 3
Security realm 1 requirements requirements requirementsGeneral Requirements
Figure 29: Example of security requirements organisation
4.4.1 General Security Requirements
# Requirement
Cryptographic solutions used within the eUICC ecosystem SHALL offer strength at
SG1
least conform to NIST cryptographic recommendations in NIST SP800-57 [20]. Past or future communications associated with Profile download and installation,
between the SM-DP and the eUICC, whenever trappable by third party SHALL NOT
SG2 be recoverable based upon the compromise of a single long-term key used for
message encryption. A similar requirement for Platform Management is for further
study.SG3 The certificate chains SHALL be highly secure, highly reliable and verifiable.
SG4 All cryptographic keys SHALL be kept in secure environment (e.g. HSM, eUICC).
SG5 The keys used by the EUM for eUICC Certificate generation SHALL be stored in a
secure environment (i.e. in a Hardware Security Module).SG6 The solution SHALL NOT prevent a further release allowing the capability to upgrade
the network authentication algorithms used within the ecosystem.
The architecture SHALL provide a flexible solution including on the base of its security
SG7 principles, meaning the security applied to a subsystem of the global ecosystem
SHALL NOT challenge the security of the overall ecosystem once interconnected.
The architecture SHALL provide an interoperable solution including on the base of its
SG8 security principles, meaning the security applied to a subsystem of the global
ecosystem SHALL NOT challenge the security of the overall ecosystem once
interconnected.
Multiple Roles and functions MAY be played by a single Actor as long as:
1. It respects local lawful obligations;
SG9
2. It does not lower the overall security level of the system;
3. It does not conflict with own Operator security policies (e.g. force an operator
to share its secrets with a third party).SG10 The Operator and the M2M SP SHALL be able to reject to use a non-trusted system
for the Embedded UICC management.4.4.2 Security Realms Requirements
# Requirement
SR1 Security realms SHALL be identifiable and mutually authenticated for the purpose of
any communication.SR2 Communication between the SM-SR and the eUICC SHALL be protected against
replay attacks.An entity within a security realm MAY need authorisation before communication SR3 exchange.
Any end to end data communication between two security realms of the eUICC
SR4 ecosystem SHALL be origin authenticated, integrity and confidentiality protected,
protected against replay attacks and non-reputable. Non-repudiation MAY not apply
to communication with the eUICC. Network communication links used inside a security realm SHALL be dedicated – i.e.
SR5 neither public network, neither mutualised. E.g. solutions such as MPLS or GRE are
not considered as dedicated links; a solution such as an authenticated and secured
VPN is considered as dedicated. When two security realms are exchanging data, they SHALL at first engage a security
SR6 negotiation (e.g. EAP, IPSEC, TLS handshake…) resulting in the application of an
agreed security level between them.
SR7 Security realms SHALL enforce filtering rules so that only authorised entities
are granted access to allowed services.SR8 When negotiating a communication, at least the lowest acceptable common
cryptographic suite SHALL apply.4.4.3 eUICC Requirements
# Requirement
eUICC SHALL be certified according to the GSMA Embedded UICC Protection Profile SE1 [27].
Void SE2
Void SE3
SE4 The eUICC platform SHALL be in line with Common Criteria EAL4+ - EAL4
augmented by AVA_VAN.5 and ALC_DVS.2.
SE5 Upon Profile deletion, the eUICC SHALL ensure of the complete wipe of the Profile.SE6 eUICC SHALL only accept Platform and Profile Management commands sent from
an authorised SM-SR or SM-DP.SE7 The integrity of the Profile SHALL be ensured before its installation in the eUICC.
eUICC SHALL reject any Platform and Profile Management commands that are in
SE8 conflict with the Policy Rules of any Profile on the eUICC the only exception being for
the master delete command.SE9 eUICC SHALL be resistant to tamper attacks (physical and logical).
SE10 Profile keys and algorithm parameters SHALL NOT be extractable from the eUICC.
SE11 A Profile SHALL NOT be exported from the eUICC.
According to 3GPP TS21.133 [17], eUICC SHALL be able to play a role in deterring
SE12 terminal theft; e.g. this could be achieved by the definition of a particular configuration
for the eUICC preventing normal use of the Device but allowing emergency services.SE13 The eUICC SHALL provide a secure way for the SM-DP and SM-SR to check its
identity and status in such a way that the entity has a proof of identity and origin. This
capability is offered through the verification of the eUICC certificate during the
Eligibility Verification function.SE14 All cryptographic functions SHALL be implemented in a robust tamper-proof way and
resistant to side-channel attacks.SE15 The Operator Credentials SHALL NOT be extractable from a Profile on the eUICC.
SE16 The eUICC SHOULD support a secure mechanism to allow the eUICC OS Update.
In case it supports such mechanism, it SHALL be declared in the EIS.SE17 If the mechanism in SE16 is supported, the eUICC SHALL implement a mechanism
to report the updated OS version identifier to the SM-SR.4.4.4 SM-SR and SM -DP Requirements
# Requirement
SM1 SM-DP SHALL be certified according to a GSMA SAS-SM scheme [22]. (SM-DP)
SM2 SM-SR SHALL be certified according to a GSMA SAS-SM scheme [22]. (SM-SR)
SM3 SM-SR SHALL implement an access control mechanism on the request for execution
of the SM-SR functions only to authorised security realms.
(SM-SR) SM4 SM-DP SHALL implement an access control mechanism on the request for execution
of the SM-DP functions only to authorised security realms.
(SM-DP) SM5 Security realm of SM-SR and SM-DP, and eUICC interfaces SHALL have proper
counter measures against denial of services attacks.
(SM-SR) SM6 The donor SM-SR SHALL NOT be able to access the eUICC once the SM-SR switch
procedure has been completed.
(SM-SR) SM7 The SM-DP SHALL be able to establish Profile Management Credentials on the
eUICC for the secure end-to-end communication used for the Profile loading in a
(SM-DP) reliable and confidential way. SM8 The SM-SR SHALL be able to establish Platform Management Credentials on the
eUICC for the secure end-to-end communication used for the Platform Management
(SM-SR) in a reliable and confidential way.The Operator SHALL be able to update the OTA Keys in its Profile on the eUICC in a SM9 secure and confidential way reusing existing OTA Platform mechanisms.
SM10 There SHALL be a secure end to end communication channel between the Security
Realms which host the SM-DP function and the eUICC during the Profile installation.4.4.5 Machine to Machine Device Requirements
# Requirement
SD1 The security of the system SHALL NOT be dependent upon the security mechanisms
within the Device.SD2 The Device SHALL NOT be able to access nor modify sensitive Profile data, i.e.
credentials, management commands, Policy Rules, authentication algorithm
parameters.4.4.6 Policy Control Function
# Requirement
SP1 Policy Rules are to be protected against modification by unauthorised entities when
they are stored within, and transported between, the SM-SR, SM-DP and eUICC.SP2 Policy Rule transport SHALL be treated as per SR2.
4.5 Security Architecture
4.5.1 Secure Download and Installation of a Profile
This section describes the security details related to the procedure stated in section 3.5.4. Download and installation of a Profile SHALL be done in a secure way, as follows:
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “Operator” as OP #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF
OP->DP: [1.a] Profile Download Request
Rnote over DP #FFFFFF [1.b] SM-SR Identification Endrnote
DP->SR: [1.c] Get eUICC info set (EIS) of EID
SR-->EUICC: [1.d] Void
SR->DP: [1.e] Send eUICC info set (EIS) of EID
Rnote over DP #FFFFFF [1.f] EIS check Endrnote
DP-->OP: [1.g] if EIS Conflict, notify
DP->SR: [2.a] ISD-P creation
SR->EUICC: [2.b] ISD-P creation
EUICC->SR: [2.c] Creation response
SR->DP: [2.d] Creation response
DP-->OP: [2.e] if failure, notify
DP<->EUICC: [3] Secure Channel establishment: \nsession keyset (cf. section 4.5.1.2)
Rnote over DP #FFFFFF [4] Encrypt and sign the Profile using the session keyset endrnote
DP->EUICC: [5] Send the Profile encrypted and singed \nwith the session keyset
Rnote over EUICC #FFFFFF
[6-7] Verify, decrypt and install Profile Using the session keyset Endrnote
EUICC->SR: [8.a] Profile Download Confirmation\n(EID, …)
Rnote over SR #FFFFFF [8.b] EIS Update Endrnote
SR->DP: [8.c] Profile Download Confirmation \n(EID, …)
DP->OP: [8.d] Profile Download Confirmation \n(EID, …)
@enduml
Figure 30: Secure Download and Installation of a Profile
The process between the Operator and the eUICC SHALL be as follows:
Start Conditions:
A. Operator and SM-DP share the Network Access Credentials associated to the
Profile.Procedure:
1. (a) The Operator requests a Profile download and installation to the SM-DP
1. (a) If not already done in earlier transactions, the SM-DP and the SM-SR authenticate each other and will use secure communication for all further data exchanges.
1. (b-f) The SM-DP requests the SM-SR for the relevant part of the eUICC information set (EIS).
2. (a-e) The SM-DP requests that the SM-SR creates an ISD-P on the eUICC.
3. The SM-DP establishes a keyset between itself and this new ISD-P within the
eUICC (See section 4.5.1.1 regarding Establishment of the Keyset)4. The SM-DP encrypts and signs the Profile using the keyset established in step 3
according to the secure channel protocol.5. The SM-DP sends the encrypted and signed Profile to the ISD-P for download
and installation in the eUICC using the secure channel protocol based on the
keyset established in step 36. The eUICC decrypts and verifies the integrity of the Profile using the keyset
established in step 3.7. The Profile is installed on the eUICC.
8. (a to d) The eUICC notifies the status of the download and installation process to the SM-SR, to the SM-DP and the Operator. The SM-SR updates the EIS information of the corresponding eUICC in its database.
End Conditions: A. The Profile is installed on the eUICC.
4.5.1.1 Establishment of the Keyset
This chapter details the establishment of the keyset in step 3 in the Secure Download and Installation process. The keyset is calculated by both the SM-DP and the eUICC on the base of a shared secret called ShS. The ShS is generated locally by both entities SM-DP and eUICC using a Key Agreement Algorithm.
4.5.1.2 Key Agreement
A key agreement protocol is executed between the SM-DP and the eUICC to generate the Shared Secret ShS. The ShS is generated by both SM-DP and the eUICC using a key agreement protocol (e.g. Elliptic Curve Key Agreement based on Diffie-Hellman or ElGamal – ECKA-DH, ECKA-EG).
The result of the key agreement protocol must provide authentication which will help protect against man-in-the-middle attacks Authentication of the eUICC to the SM-DP is mandatory.
The mutual authentication of the SM-DP and the eUICC is mandatory. The following figure details the step 3 of Figure 30.
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox
Participant “Operator” as OP #FFFFFF Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Box “eUICC” #FFFFFF Participant “ISD-P” as ISDP #FFFFFF endbox
DP->ISDP: [3.a] Initiate key agreement
Rnote over ISDP #FFFFFF [3.b] Calculate ShS, derive keyset Endrnote
ISDP->DP: [3.c] Key agreement response
Rnote over DP #FFFFFF [3.d] Calculate ShS derive keyset Endrnote
@enduml
Figure 31: Key Set Establishment: Key Agreement Protocol (overview)
4.5.2 Mutual Authentication
This section details the mutual authentication mechanism between two entities in the architecture. The entities concerned within this section to authenticate each other are SM-DP to SM-SR and SM-SR to SM-SR. Authentication between other entities in the system MAY use other solutions for authentication and is not in the scope for this section. To secure the messages being sent between the entities from an authentication point of view, at least one of the following two mechanisms SHALL be used:
1. Security within a message allowing it to be authenticated, e.g. Web Service Security
(WS-Security);
Mutual authenticated transport level security, e.g. TLS.5 Compliance requirements
5.1 SM-SR and SM -DP Compliance Requirements
# Requirement
SMC1 Site Security of SM-DP and SM-SR SHALL be certified
according to GSMA SAS-SM scheme [22].
SMC2 Functional compliance of SM-DP and SM-SR SHALL be verified
through vendor or third party test suite according to the GSMA
test plan.5.2 eUICC Compliance requirements
# Requirement
EUC1 eUICC SHALL be certified according to the GSMA Embedded
UICC Protection Profile [27].
EUC2 Functional compliance of eUICC SHALL be verified through an
independent GSMA industry-approved certification scheme.5.3 EUM Compliance requirements
# Requirement
EMC1 The EUM production site SHALL be GSMA SAS-UP [23]
certified.A Interfaces
The purpose of this section is to provide additional information about the various interfaces required between the different elements of the architecture, and the functions to be supported over these interfaces.
A.1 EUM – SM-SR interface
The procedure “eUICC Registration at SM-SR” in section 3.5.1 mainly addresses this interface. The main purpose is to enable the registration of the eUICC platform at the SM-SR.
A.2 Operator – SM-DP Interface
This interface covers the Profile ordering aspects and the procedure as defined in section
3.5.3. This interface is also used during the Profile Download and Installation procedure as
defined in section 3.5.4, the Profile enabling via SM-DP as defined in section 3.5.7 and the
ISD-P deletion via SM-DP as defined in section 3.5.10.
The following information is exchanged between the Operator and the SM-DP:
The description of the Subscriptions e.g.:
o The IMSI range or list of IMSIs, the ICCID range or list of ICCIDs
o The Applications and files as defined in the relevant specifications (in particular
3GPP TS 31.102 [18], 3GPP TS 31.103 [19] and ETSI TS 102 221 [3].)
o The algorithm parameters associated with its corresponding Network Access
Application (for instance with Milenage: the OPc, ri, ci values)
Other data or applications which are part of the Profiles.
All relevant information needed to configure the future ISD-P, the Remote File
Management and Remote Application Management applications.
The Policy Rules.
All relevant known information on the target eUICC and its SM-SR e.g.:
o The geographical location of the SM-SR.
o The type of communication supported by the SM-SR.
o the security level to be supported by the SM-SR (in particular, the security
association methods that can be used between the SM-DP and the SM-SR (see
security section for proper recommendations))
o The methods to be supported by the SM-SR to communicate with the eUICC (e.g.
support of SMS and/or RAM over HTTP(s) over LTE/EPS)
o The conditions under which the Profiles prepared and encrypted by the SM-DP
are to be delivered directly (via SM-SR) to the specified eUICC.
The SM-DP provides:
The relevant information for the Profiles to the Operator so that the Operator can
provision the information relevant to the Subscription in its mobile network.A.3 SM-DP – SM-SR Interface
This interface is used during the Profile download and installation, the Profile enabling via SM-DP, Profile disabling via-SM-DP, Profile deletion via SM-DP procedures. The entity taking the role of SM-DP and/or the SM-SR MAY retain certain information related to the Profile according to the commercial agreement, Operator Policy Rules and regulatory data retention obligations.
A.4 Operator – SM-SR interface
This interface is used during the Profile enabling, Profile disabling, and Profile deletion procedures. The SM-SR takes as input: - Platform management requests from the Operator; - Policy Rule (POL2) update from the Operator; - The EID of the targeted eUICCs. The Operator takes as input: - The relevant parts of the EIS of the targeted eUICCs; - Receipts/responses to Operator Platform management requests; - Receipts/responses to Operator Policy Rule updates; - Platform management-related events. This interface is also used when managing the PLMA, allowing M2M SP to manage a Profile owned by an Operator on its behalf, and under PLMAs. The related procedure is described in section 3.5.15.
A.5 SM-SR – eUICC interface
This interface is used during the Profile download and installation, the Profile enabling, the Profile enabling via SM-DP, Profile disabling, Profile disabling via-SM-DP, Profile deletion, Profile deletion via SM-DP procedures.
A.6 SM-SR – SM-SR Interface
This interface is used during the SM-SR Change procedure as defined in 3.5.11.
A.7 Operator – eUICC interface
This corresponds to the interface between the Operator and the eUICC.
A.8 M2M SP – SM-SR interface
This interface is used during the Profile enabling, Profile disabling, and Profile deletion via M2M SP procedures as defined in 3.5.16, 3.5.17 and 3.5.18.
A.9 Device – eUICC interface
This interface provides the possibility for a Device supporting Local Enable / Local Disable
functionality to enable or disable the Test Profile or the Emergency Pr ofile. Local Enable and
Local Disable functions are only possible for the Test Profile or the Emergency Profile .
A Device supporting Emergency Calls, requiring a dedicated Emergency Profile, can use this
interface to enable the Emergency Profile in situations requiring to set up an Emergency Call
to specific Emergency Call number(s). The Device can use this interface to disable the
Emergency Profile when the emergency situation has ended.
NOTE: An emergency situation MAY not end immediately after an Emergency Call,
as it MAY be necessary to receive a call back from the Public Safety Answering
Point (PSAP).B Risk Matrix (Informative)
This section lists risks, related impacted sensitive assets and impacted properties (C=Confidentiality, I=Integrity, A=Availa bility).
Impacts
# Risks Definition Assets
C I A
Generic Risks
Penetration on a server managing master keys or private keys, loss of
Failure in certificates or
V01
private keys chain
confidentiality due to human error or malevolence might lead to loss of all certificates
trust in the entire process chain. Authentication algorithm Weakening of authentication algorithms due to malevolence, human error eUICC
V02
breach or other means. authentication algorithm
A breakthrough in cryptographic research might lead to the weakening or All assets using
V03 Cryptographic breakthrough
total loss of authentication and ciphering schemes. cryptographic primitives
V04 EID tampering Installation of Profile on a wrong eUICC Profile
Provisioning & Delivery Risks Denial of service on public
Denial of service using vulnerabilities in public interfaces or basic resource Profiles
V05 exhaustion techniques might lead to the impossibility of Provisioning and
network facing components connectivity chain to eUICC
management of eUICC, and cause loss of services.
Critical component Lax policies in network access or interconnection might lead to the
V06
communication interception interception and loss of confidentiality in critical assets such as Profiles. eUICC Penetration of the
Lax policies in network access or interconnection might lead to the
V07 Subscription Management
interception, alteration or deletion of critical assets such as Profiles. network components
network
Rogue component insertion A malicious or compromised partner might introduce a rogue component
V08 within trusted network (e.g. within a security domain leading to loss of integrity or confidentiality of All
SM-SR or SM-DP) critical information such as the Profile or a management command.
Confidentiality loss of Interception of transport key might lead to unsolicited connection to the
transport keys used to deliver eUICC or network component in order to perform denial of service, theft data protection key and its
V09
certificate
the Profile up to the eUICC of service or impersonation.
Confidentiality or integrity loss
Communication of Profiles over non protected networks might lead to the Profiles
V10 of Profile during Provisioning
interception or tampering of transiting Profiles eUICC
or delivery Insufficient isolation of Profiles on the eUICC might lead to the reuse or eUICC
Poor isolation of Profiles on
V11 leaking of critical part of the Profile such as the ISD-P or keys such as the
the eUICC Profiles
K.
Human error, malevolence or action from a malicious 3rd party might lead management function key
Rogue Profile and Platform
V12 to unsolicited Profile or Platform Management commands resulting in loss
Management commands eUICC
of service, impersonation or fraud.
PCF files
Human error, malevolence or compromising of the PCF might enable
V13 PCF breach Profiles
scenarios where a Profile is able to bypass operators Profile policies
eUICC
eUICC Risks
Failure in providing a secure eUICC might lead to physical or logical
V14 eUICC tampering
attacks that might allow leaking or modifying of installed Profiles. eUICC It might be possible for an attacker to install a valid Profile on a non-trusted
Installation of Profile within a
V15 eUICC (being soft or hardware) thus allowing for the extraction or eUICC
non-certified eUICC
replication of the Profile. This might lead to fraud or impersonation attacks
eUICC
Failure to prevent Profile extraction or loss of confidentiality in the Profile data protection key and its
creation database might lead to the leak of data enabling the cloning of certificate
V16 eUICC cloning
eUICC and embedding them in soft or rogue eUICC in order to perpetuate
fraud or impersonation. OTA Keys
Profile keys
Dependability Failure to recover from a Delivery of a malformed Profile might result in a loss of communication eUICC
V17
damaged Profile abilities and ultimately to Device loss. Inability for a eUICC to verify the integrity of a delivered Profile, might lead eUICC
V18 Enabling of degraded Profiles to the installation of a malformed or forged Profile leading to loss of
service, OTA ping-pong storm, fraud or impersonation scenarios.
Inability to remove old Profiles from an eUICC might lead to the dead eUICC
V19 Inability to wipe Profile occupancy of a Profile slot, rendering Profile switching or Provisioning
impossible. Failure to make emergency In case of forged, malformed or absence of a valid Profile, it might be eUICC
V20
call impossible for a user to make emergency calls. Baseband
Device
Unauthorised ability to wipe If Profiles are erasable directly from the Device without authorisation by
V21 Profile for reselling of stolen using a software or hardware switch, it might enable malicious 3rd parties eUICC
Device to resell a stolen Device.C List of Sensitive Assets (Informative)
This section lists the sensitive assets to be protected. The management of such assets is the
most critical when they are available in clear and impacts the components accessing these
assets (see 2 nd column). However they MAY be transferred between entities as long as their
security properties (integrity, confidentiality, authentication…) are not compromised. The
fourth column of the following table corresponds to the criticality of the asset for the Embedded
UICC ecosystem. The criticality illustrates a security impact on the architecture and the
potential cost impact on the Actor(s) in case of security failure.
The following criticalities are considered:
Criticality 4: the Embedded UICC ecosystem MAY be at risk with severe business
risks for several or all Actors. Criticality 3: one part of the Embedded UICC ecosystem is affected; the affected
Actor(s) MAY suffer strong effects which MAY endanger their whole business.
Criticality 2: the service is temporarily interrupted; the affected Actor(s) have a major
business impact.
Criticality 1: the service is temporarily interrupted; the affected Actor(s) have a minor
business impact.Sensitive Asset Asset Handled In Clear By: Criticality
Asset Originator
Owner
Authentication Operator Operator, eUICC 3 to 4
Algorithm
Authentication Operator Operator, eUICC, SM-DP 2 (one eUICC
Algorithm Key affected) to 4 (a set of
eUICCs affected)
Authentication Operator Operator, eUICC, SM-DP 2 (one eUICC
Algorithm affected) to 4 (a set of
Parameters eUICCs affected)
(e.g. Opc, Ri-Ci
etc.)
IMSI Operator Operator, eUICC, SM-DP 1 (one IMSI affected)
to 2 (a set of IMSIs
affected)
MSISDN Operator Operator, SM-DP, SM-SR 1 (one MSISDN
affected) to 2 (a set of
MSISDNs affected)
GSMA CI Root CA owner Root CA owner 4
Certificate
EUM Certificate Root CA owner EUM 3
eUICC EUM EUM, eUICC 2 to 3
Certificate
EID EUM SM-SR, eUICC, SM-DP, Operator, , 1 (one EID affected) to
EUM 2 (a set of EIDs
affected)
Profile Operator Operator, eUICC, SM-DP 3 to 4Sensitive Asset Asset Handled In Clear By: Criticality
Asset Originator
Owner
Operator OTA Operator Operator, eUICC, SMDP 3 to 4
Keys
PCF rules Operator eUICC, Operator, SM-SR, SM-DP 3 to 4Profile Asset Asset Handled In Clear By: Criticality Management Originator Sensitive Data Owner Platform SM-SR SM-SR, eUICC 2 to 4 management keyset Profile SM-DP SM-DP, eUICC 4 Management keyset
D Additional Information Related to Section 4.5 (Informative)
Nomenclature used in this annex:
Acronym Definition
EC Elliptic Curves
Ke The key from the keyset used for encryption
Km The key from the keyset used for message authentication and integrity
protection.
Ku The key from the keyset used for protection of key values.
PKeuicc This Public key is part of the eUICC Certificate. In GlobalPlatform, it
corresponds to the public key of the ECASD.
For ElGamal Elliptic Curves key agreement this key is PK.CASD.ECKA [GP
Am. E]
For signature verification by external entities this key is PK.CASD.AUT [GP
Am. A]
For confidentially (encryption by external entity) this key is PK.CASD.CT [GP
Am. A]
SKeuicc Private key of the eUICC. In GlobalPlatform, it corresponds to the private key
of the ECASD.
For ElGamal Elliptic Curves key agreement this key is SK.CASD.ECKA [GP
Am. E]
For signature by eUICC this key is SK.CASD.AUT[GP Am. A]
For decryption by eUICC this key is SK.CASD.CT [GP Am. A]
PKSM-DP Public Key of the SM-DP
SKSM-DP Private Key of the SM-DP
PKeph Ephemeral Public Key generated by the SM-DP
SKeph Ephemeral Private Key generated by the SM-DPD.1 Void
Void
D.2 Details on the ElGamal Key Agreement
@startuml skinparam monochrome true skinparam ArrowColor Black
hide footbox Participant “SM-DP” as DP #FFFFFF Participant “SM-SR” as SR #FFFFFF Participant “eUICC” as EUICC #FFFFFF
Rnote over DP #FFFFFF [1] Verify eUICC Cert and EUM signature Endrnote
DP->SR: [2.1] Key agreement initiation\n(SM-DP Certificate)
SR->EUICC: [2.2] Key agreement initiation\n(SM-DP Certificate)
Rnote over DP #FFFFFF [3.1] Generation of SKeph and PKeph Endrnote
DP->SR: [3.2] Keyset generation Request (PKeph)
SR->EUICC: [3.3] Keyset generation request
Rnote over EUICC #FFFFFF [3.4] a. ISD-P provides ECASD with PKeph b. ECASD generates its ShS from eUICC's SK and SM -DP PKeph c. ISD-P generates its keys and receipt endrnote
EUICC->SR: [3.5] Confirmation (receipt)
SR->DP: [3.6] Confirmation (receipt)
Rnote over DP #FFFFFF [4] Generate ShS from SKeph and eUICC PK Derive key Verify receipt and validity endrnote
DP<->EUICC: Mutual Authentication OK
@enduml
Figure 32 : ElGamal Key Agreement
Start Condition: The SM-SR has connectivity with the eUICC.
1. The SM-DP verifies the eUICC Certificate, which carries a signature from the EUM.
This is part of step 1.e of Figure 30.
2.1 and 2.2 The SM-DP sends its certificate to the eUICC through the SM-SR
3.1 The SM-DP generates an ephemeral EC (elliptic curve) key pair, named SKeph
and PKeph and sends PKeph to the SM-SR.
3.2 and 3.3 The SM-DP sends a key set generation request to the SM-SR, including
the ephemeral public key PKeph. The SM-SR passes the request for key set
generation to the ISD-P on the eUICC, providing the PKeph.
3-4. The eUICC now performs the following actions: The ISD-P provides the ECASD
with the PKeph.
The ECASD generates a Shared Secret ShS from its own secret key and received
ephemeral PKeph and returns it to the ISD-P.
The ISD-P uses ShS to generate its own key pair as well as a receipt from the
operation.
3-5. The ISD-P passes a confirmation (with receipt) of the generation back to the SM-
SR.
3-6. The SM-SR passes the confirmation back to the SM-DP.
4. The SM-DP generates ShS from the ephemeral secret key SKeph and the eUICCs
public key.
The SM-DP uses this calculated ShS to derive the same key set as generated by the
ISD-P.
The SM-DP verifies the receipt it received from the eUICC to verify the validity of
the entire operation. Together with the eUICC Certificate verified in step 1, this also
confirms the authenticity of the eUICC, and confirms the correct keyset derivation
on both the eUICC and the SM-DP server.
End Condition: A secret key set, whose contents are only known within the ISD-P and
by the SM-DP has been generated and the eUICC is authenticated to the SM-DP.In a GP based model, for key agreement the PKeuicc corresponds to PK.CASD.ECKA which is part of CERT.CASD.ECKA signed by the EUM.
D.3 Calculation of the keyset (Ke, Km, Ku)
The keyset is constituted of 3 keys, derived from the ShS, calculated both by eUICC and SM- DP entities as follow: Ke: encryption key used to encrypt the Profile; Km: integrity key used for MAC; Ku: key from the keyset used for protection of key values. To be calculated, these keys SHALL use a Key Derivation Function (KDF).
The KDF could be a PRF (Pseudo Random Function) which is a combination of one way hash functions. Several PRFs can be used in the Key Derivation Function. The KDF could take as parameters information related to the eUICC, the Profile owner (Operator), the Profile itself, the SM-DP or the card issuer.
These different keys are calculated as follow:
Ke=KDF(ShS, additional_information, diversified_parameter1); Km=KDF(ShS, additional_information, diversified_parameter2);
Ku=KDF(ShS, additional_information, diversified_parameter3);
With,
additional_information is a common diversification input to generate the three keys; it
could include information relating to Operator, SM-DP, eUICC, Profile and a nonce.
Diversified_parameters are diversification parameters to generate different keys.
The Profile can be sent from the SM-DP to the eUICC on the base of a secure channel protocol
using this keyset.D.4 Role of the EUM in the Certificate Chain
The EUM is required in the different key establishment scenarios to sign the eUICC Certificate which contains the public key of the asymmetric key pair of the eUICC (stored in the ECASD in the GlobalPlatform scenario). By verifying this signature and by checking the response produced by the eUICC in the key establishment procedure, the SM-DP can authenticate the eUICC independently of the SM-SR.
D.5 Mutual Authentication Binding to a SOA Environment
This section provides information when deploying eUICC remote management system in SOA environment using Web Services technology, following the OASIS and W3C WS-* standard. This standard provides interoperability and loose coupling between parties named as “message requester” and “message receiver”. The architecture does not prevent from using another type of technology if the security requirements detailed in this document are met. It implies that both message requester and message receiver uses the same technology.
D.5.1 Authentication
To secure the messages being sent between the entities, at least one of the following two
mechanisms SHALL be used:
1. WS-Security standard for client authentication and transport level security (TLS) for
server authentication.
2. Mutual authenticated transport level security (TLS).
In both cases the authentication at TLS level requires the use of digital signed certificates.
A platform that needs to prove its identity at TLS level is required to have X.509 certificates
(and public-private key pairs).
The specifics of who is trusted to issue X.509 certificates depend on the organisation’s PKI
setup. For authentication, the subject of the X.509 certificate identifies the Actor. We also
assume that the issuer of the X.509 certificates is a general Certificate Authority not directly
involved in any authorisation of the web service transactions, but is relied on for the validity of
the X.509 certificate in a manner out of scope of the scenarios covered.E Void
F Profile Creation, Ordering and Personalisation (Informative)
The following diagram shows an example of how the functions defined in section 3.3.1.1 MAY be performed.
Figure 33: Profile Creation, Ordering and Personalisation
Document Management Document History
Version Date Brief Description of Approval Editor /
Change Authority Company
GSMA Embedded
1st Release of Document,
SIM Leadership Ian Smith,
V1.0 01/7/2013 submitted to DAG#108 and Team and PSMC GSMA
PSMC#116 for approval 2nd Release of Document, GSMA Embedded
Ian Smith,
V1.1 06/12/2013 submitted to DAG#108 and SIM Leadership
GSMA
PSMC#116 for approval Team and PSMC
Version 4 is released (skipping GSMA Embedded
Yolanda Sanz,
V4.0 31/03/2019 v2.0 and v3.0) to align with SIM Leadership
GSMA
SGP.02 version V4.0. . Team and TG
Carmen Kwok,
V4.1 08/05/2020 4th Release of Document ISAG
GSMA
Other Information
Type Description
Document Owner Carmen Kwok, GSMA
Editor / Company Alejandro Pulido, VALIDIt is our intention to provide a quality product for your use. If you find any errors or omissions, please contact us with your comments. You may notify us at [email protected]
Your comments or suggestions & questions are always welcome.
6
© GSM Association. Converted automatically from the published PDF; layout, figures and tables may differ from the original. The authoritative version is the original: https://www.gsma.com/esim/wp-content/uploads/2020/06/SGP.01-v4.1.pdf.