Description
V2P (Vehicle-to-Pedestrian) Service is one of the four fundamental V2X service types defined by 3GPP, alongside V2V (Vehicle-to-Vehicle), V2I (Vehicle-to-Infrastructure) and V2N (Vehicle-to-Network). It describes a communication relationship in which at least one party is a UE carried by a person — typically a handheld terminal, smartphone, wearable or dedicated pedestrian safety device — and the other party is a UE installed on a vehicle. The service is defined at the application/service level rather than at the radio level, meaning it can be realized over different underlying transport mechanisms: direct sidelink communication (PC5 interface) or network-based communication over the Uu interface via the cellular core network.
Architecturally, V2P is part of the broader V2X Service framework specified in TS 22.885 (service requirements) and TS 23.785 (architecture enhancements for LTE-based V2X). In the direct communication mode, the pedestrian UE and the vehicle UE exchange V2X messages over the PC5 sidelink using either LTE sidelink (Rel-14 onwards) or NR sidelink (Rel-16 onwards). In the network-based mode, V2X messages are transported through the EPC or 5GC, with the V2X application server or a local V2X control function coordinating message distribution. The V2X Control Function (for LTE/EPC) or the V2X Control Function in 5GC provides the UE with the parameters needed to use V2P services, including authorization, radio parameters and service authorization policies.
A key characteristic of V2P is that the pedestrian side is typically resource-constrained: handheld devices have limited battery, antenna gain and transmit power compared to vehicle-mounted units. 3GPP therefore addresses V2P-specific requirements such as pedestrian UE power saving, the ability of pedestrian UEs to receive V2X messages without transmitting, and the need for the network to support pedestrian UEs that may not be continuously active. The service requirements in TS 22.885 define performance expectations such as latency, reliability and range for V2P use cases, which are typically more stringent than ordinary mobile broadband but less demanding than some V2V safety use cases.
V2P messages are carried as V2X messages, which contain V2X application layer information and may be safety-related (e.g. collision warnings between a vehicle and a pedestrian) or non-safety-related. The application layer is outside 3GPP scope, but 3GPP specifies the transport, QoS handling, authorization and message dissemination mechanisms. In 5G (Rel-16 onwards), V2P benefits from the enhanced NR sidelink design, which supports groupcast and broadcast communication, more flexible resource allocation and improved reliability and latency, making it better suited for vulnerable road user protection.
V2P is important because vulnerable road users — pedestrians, cyclists and motorcyclists — represent a large share of road traffic fatalities, and direct or network-assisted warnings between vehicles and these users can prevent accidents. It is a foundational service concept for intelligent transport systems (ITS) and cooperative safety applications, and it is referenced throughout the V2X architecture, security and radio specifications.
Purpose & Motivation
V2P Service exists to formalize, within the 3GPP system, the communication relationship between vehicles and people. Before Rel-14, cellular systems had no standardized way to describe or support direct safety communication between a vehicle and a pedestrian's handheld device; V2X work in 3GPP initially focused on V2V and V2I, and pedestrian protection was addressed only indirectly. The introduction of V2P in Rel-14 gave operators, vendors and application developers a common service definition, enabling authorization, QoS and radio resource frameworks to be applied consistently to pedestrian-related safety applications.
The concept solves several practical problems. First, it allows a pedestrian UE to participate in V2X safety communication even though it has very different capabilities from a vehicle OBU — limited power, smaller antennas and intermittent activity. Second, it provides a standardized basis for the network to authorize and configure pedestrian devices for V2X, avoiding proprietary or fragmented approaches. Third, it enables both direct sidelink and network-based delivery, so that V2P can work in coverage, out of coverage, or via infrastructure depending on deployment choices.
Historically, V2P was motivated by road safety statistics showing high fatality rates among unprotected road users, and by the broader ITS vision of cooperative intelligent transport systems. By defining V2P as a first-class V2X service type, 3GPP ensured that pedestrian protection could be designed into the same architecture, security and radio frameworks as vehicle-to-vehicle communication, rather than being an afterthought.
Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
V2P Service was introduced as a type of V2X Service where one party is a UE equipped on a vehicle and the other party is a UE carried by an individual (e.g. handheld terminal carried by a pedestrian, cyclist, driver or passenger). This established the initial LTE-based V2X architecture with PC5 sidelink and Uu transport options.
The definition wording was revised to: 'A type of V2X Service, where both parties of the communication are UEs using V2P application.' The change shifted the emphasis from the physical placement of the devices (vehicle vs. carried by a person) to the application type used by both parties, aligning V2P with the parallel rewording of V2V.
Defining Specifications
3GPP specifications that define or reference V2P Service, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 22.885 ve00 | LTE Support for V2X Services | Rel-14 read |
| TR 23.785 ve00 | Architecture enhancements for LTE V2X services | Rel-14 read |
| TR 26.985 vj00 | Media Handling for Advanced V2X Services | Rel-19 read |