Description
UE-only Operation is a Rel-18 feature defined in 3GPP TS 23.586 (Study on Ranging/Sidelink Positioning), TR 23.700, and TS 38.355. It refers to a mode of operation for Ranging/Sidelink Positioning where the entire positioning service request handling and result calculation are performed by the UE itself, without relying on a network entity such as a Location Management Function (LMF) or a gNB. This is in contrast to network-assisted or network-based modes where the network coordinates measurements and computes the position.
In UE-only Operation, UEs use sidelink (PC5) interfaces to exchange positioning reference signals (PRS) or ranging signals directly with other UEs. The initiating UE sends a service request over sidelink, and the participating UEs perform measurements (e.g., time of arrival, round-trip time) and share the raw data. The initiating UE then calculates the relative distance or position based on the collected measurements. The process is fully distributed: no core network involvement is required for the positioning computation, although the network may still configure sidelink resources and provide authorization.
The architecture leverages the 5G NR sidelink physical layer (PC5) and the positioning protocol enhancements defined in TS 38.355. Key components include the initiating UE (which acts as a controller), the target UE(s) (which respond with measurements), and the sidelink resource pool configured by the gNB. The UE must support sidelink positioning capabilities and may use broadcast, groupcast, or unicast sidelink communication. Security and privacy are handled at the application layer or via sidelink security procedures.
UE-only Operation is particularly valuable in scenarios where network coverage is unavailable or unreliable, such as disaster response, underground mining, or remote areas. It also enables low-latency positioning for V2X (e.g., vehicle platooning, collision avoidance) and industrial IoT (e.g., asset tracking within a factory). Because the UE performs the calculation, the mode reduces signaling overhead and dependency on network infrastructure, but it requires sufficient UE processing power and battery.
The feature was introduced in Rel-18 as part of the broader 5G positioning enhancements. It complements other modes like UE-assisted (where the UE measures but the network computes) and network-based (where the network measures and computes). The definition remained unchanged in Rel-19, indicating stability. UE-only Operation is expected to be further refined in future releases to support higher accuracy and more efficient sidelink resource allocation.
Purpose & Motivation
UE-only Operation was motivated by the need for positioning and ranging in environments where network coverage is absent or unreliable, and by the desire to reduce latency and signaling overhead for time-critical applications. Traditional cellular positioning relies on network infrastructure (e.g., LMF, gNBs) to coordinate measurements and compute location, which introduces delay and requires connectivity. For V2X and public safety, devices must be able to determine relative positions directly and quickly, even without network assistance. UE-only Operation solves this by moving the entire positioning workflow to the UE, enabling autonomous, low-latency operation. It also addresses privacy concerns, as location data need not be shared with the network. The feature builds on 5G sidelink capabilities and represents a step toward fully distributed positioning for advanced applications.
Release Timeline
Detected Changes Across Releases
from 3GPP Change RequestsSpecific changes extracted from the „Change history“ tables of 3GPP specifications (3 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.
Defining Specifications
3GPP specifications that define or reference UE-only Operation, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 23.586 vj00 | Ranging & Sidelink Positioning in 5GS | Rel-19 read |
| TS 23.700 vk10 | AI/ML Application Layer Support Phase 2 | Rel-20 read |
| TS 38.355 vj20 | Sidelink Positioning Protocol (SLPP) Specification | Rel-19 read |