Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Network Slicing

SNPN access mode

Stand-alone Non-Public Network Access Mode

Network Slicing →

SNPN access mode is a UE operating mode that restricts network selection exclusively to Stand-alone Non-Public Networks, preventing the UE from camping on public PLMNs to isolate private 5G deployments.

Introduced
Rel-16
Where
Core Network › 5G Core
Specifications
3 specs
SNPN access mode Description Purpose What changed Neighbours Detected Changes Specifications

Description

SNPN access mode is a UE configuration and operational state defined in 3GPP TS 23.501 that governs how a User Equipment selects and registers with networks. When a UE is set to SNPN access mode, it performs cell selection and network selection exclusively toward Stand-alone Non-Public Networks, which are identified by a combination of a PLMN ID and a Network Identifier (NID). The UE does not attempt to select public PLMNs while in this mode, ensuring that the device remains attached to its private network environment. This is particularly important for industrial, campus, and enterprise deployments where traffic must never leak to public networks and where the SNPN operator controls all connectivity.

The mechanism works through the interaction of several procedures. During cell selection, as described in TS 38.304, the UE reads the SIB1 broadcast, which carries the cell's PLMN identity and, for SNPN-capable cells, the NID information. The UE compares these against its configured SNPN subscription list (stored in the UE or provisioned via the USIM or a credential holder). Only cells advertising a matching SNPN are considered suitable. In RRC, as specified in TS 38.300, the UE then performs the RRC connection establishment toward the selected SNPN cell and proceeds with registration. The AMF of the SNPN authenticates the UE using credentials specific to that SNPN, which may be provisioned by the SNPN operator independently of any public mobile operator.

A key architectural point is that SNPN access mode is distinct from the normal PLMN selection mode. In normal mode, a UE may select any PLMN for which it has a subscription, including public PLMNs and, where allowed, SNPNs. In SNPN access mode, the UE is constrained to SNPNs only. This constraint is enforced at the NAS layer by the network selection procedures and at the AS layer by the cell selection criteria. The UE maintains an SNPN selection list, and the order in which SNPNs are attempted can be configured by the home network or the user.

From Rel-18 onward, the definition was extended to cover selection over additional access technologies beyond the Uu radio interface. The reference to Yt and NWu reflects the growing set of access paths through which a UE can reach an SNPN, including non-3GPP access and relay-based connectivity. This broadening aligns with the general trend in 3GPP toward multi-access connectivity and reflects the reality that private networks increasingly use heterogeneous access, such as WLAN interworking and device-to-device relaying, to extend coverage.

SNPN access mode is fundamental to the commercial viability of private 5G. It gives enterprises a deterministic way to keep devices bound to their own network, simplifies provisioning because the device does not need public credentials, and supports use cases such as factory automation, port operations, and campus networks where regulatory and security requirements demand strict isolation. It also interacts with roaming and onboarding procedures, since SNPNs may allow access via credentials held by a public network or via a default credential server (DCS) for onboarding.

Purpose & Motivation

SNPN access mode exists to solve the problem of network isolation for private 5G deployments. Before SNPNs were introduced in Rel-16, private networks were typically implemented as either isolated PLMNs or as network slices of a public network. Neither approach gave enterprises full control over identity, authentication, and network selection. An isolated PLMN required the enterprise to obtain a PLMN ID, which is a scarce regulatory resource, and network slicing still depended on the public operator's infrastructure and trust model. SNPNs decouple the private network identity from the public PLMN ID space by combining a PLMN ID with a Network Identifier (NID), allowing many private networks to coexist under a single PLMN ID.

However, the existence of SNPNs alone was not sufficient. A UE that supports SNPNs must know when to select them and must be prevented from inadvertently attaching to a public network. SNPN access mode provides this deterministic behavior. It allows a device to be provisioned for exclusive use on a private network, which is essential for devices that have no public subscription at all, such as sensors, robots, and industrial controllers. It also addresses security concerns: by preventing selection of public PLMNs, it reduces the attack surface and ensures that traffic never traverses infrastructure the enterprise does not control.

The Rel-18 extension to Yt and NWu access reflects the evolution of private networks toward multi-access and relay-based topologies. As SNPNs grow beyond single-campus deployments, devices need to reach the SNPN through various paths, and the access mode definition had to evolve to describe selection across those paths. This keeps the concept relevant as 5G-Advanced introduces more flexible deployment models.

What changed in its specifications

The latest release-to-release comparison of specifications that define SNPN access mode. Each summary describes the whole specification, not only this term.

TS 23.501Rel-18 → Rel-19

Rel-19 added MPQUIC steering to multi-access PDU sessions, XR and media handling, and an Energy Information Function. It also added Local Offloading Management for edge computing, Vertical Federated Learning for AI/ML, and Ambient IoT text.

Full comparison in TS 23.501 →
TS 38.300Rel-18 → Rel-19

Rel-19 adds multi-hop L2 UE-to-Network relay for NR sidelink as the largest item. It also adds low-power wake-up signal and receiver (LP-WUS/WUR) text, on-demand SSB and SIB1 for network energy savings, and sub-band full duplex for TDD carriers.

Full comparison in TS 38.300 →

Release Timeline

Detected Changes Across Releases

from 3GPP Change Requests

Specific changes extracted from the „Change history“ tables of 3GPP specifications (2 CRs across 2 releases). Complements the general historical overview above with the evidence-based evolution of this function.

Studied in Rel-16, normative work from Rel-17.

Rel-17 1 change
  • MUSIM support for SNPN access mode TS 23.501CR3094
Rel-18 1 change
  • Clarification of SNPN access mode TS 23.501CR3841

Defining Specifications

3GPP specifications that define or reference SNPN access mode, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 23.501 vk30 5G System Architecture Rel-20 read
TS 38.300 vj40 NR and NG-RAN Overall Description Rel-19 read
TS 38.304 vj30 NR UE Idle and Inactive State Procedures Rel-19 read