Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

SAN transmission bandwidth configuration

SAN (Satellite Access Node) Transmission Bandwidth Configuration

Radio Access Network →

SAN transmission bandwidth configuration is the set of resource blocks located within the SAN channel bandwidth that may be used for transmitting or receiving by the Satellite Access Node, defining the actually usable spectrum inside a carrier.

Introduced
Rel-17
Where
Radio Access Network › NG-RAN (5G)
Specifications
4 specs
SAN transmission bandwidth configuration Description Purpose Neighbours Specifications

Description

The SAN transmission bandwidth configuration is the set of resource blocks (RBs) located within the SAN channel bandwidth that may be used by the Satellite Access Node for transmitting or receiving. It is defined in 3GPP RF specifications 36.108, 36.181, 38.108, and 38.181 and is the innermost of the three nested spectral parameters for satellite access: operating band ⊇ SAN RF bandwidth ⊇ SAN channel bandwidth ⊇ transmission bandwidth configuration. In other words, it is the portion of a carrier's channel bandwidth that is actually populated with resource blocks and available for scheduling user and control traffic.

The concept mirrors the terrestrial NR/E-UTRA transmission bandwidth configuration: a channel bandwidth of, say, 20 MHz does not permit the use of all 20 MHz for resource blocks because guard bands must be reserved at both edges to limit out-of-band emissions and to allow the transmitter filter to roll off. The transmission bandwidth configuration specifies exactly how many resource blocks (and thus how many subcarriers, given the numerology) fit inside the channel bandwidth after guard bands are subtracted. For example, in NR at 15 kHz subcarrier spacing, a 20 MHz channel typically supports 51 resource blocks in the transmission bandwidth configuration, with the remainder consumed by guard bands.

For the SAN, this parameter is critical because satellite links are power- and spectrum-constrained. The scheduler in the gNB/eNB function hosted by the SAN can only allocate resource blocks that lie within the transmission bandwidth configuration; any RB outside it would violate the RF emission mask. The configuration therefore directly bounds the maximum number of schedulable RBs per slot and, combined with modulation and coding, the peak and average throughput per carrier. It also determines the DC subcarrier handling and the placement of synchronization and broadcast signals relative to the channel edges.

In RF conformance testing, the transmission bandwidth configuration is the reference for occupied bandwidth measurements, EVM, and in-band emission requirements. Test equipment configures the analyzer span to the channel bandwidth but evaluates in-band performance only over the resource blocks declared in the transmission bandwidth configuration. For radiated testing of satellite nodes (36.181/38.181), the configuration must be known so that the test antenna and chamber are dimensioned for the correct occupied spectrum.

Network planners use the transmission bandwidth configuration to compute per-carrier capacity: throughput ≈ (number of RBs in the configuration) × (bits per RB per second, set by MCS and numerology). Because satellite spectrum is expensive and guard bands are wasteful, maximizing the transmission bandwidth configuration within a given channel bandwidth is a design goal, and 3GPP specifications tabulate the allowed RB counts per channel bandwidth and subcarrier spacing. Together with SAN channel bandwidth and SAN RF bandwidth, this term completes the spectral description of a Satellite Access Node.

Purpose & Motivation

When 3GPP defined RF requirements for Satellite Access Nodes in Release 17, it needed a precise way to describe which part of a carrier's channel bandwidth is actually usable for scheduling. Simply stating the channel bandwidth is insufficient because guard bands consume spectrum at the edges, and RF conformance tests must know exactly which resource blocks are expected to carry signal. The SAN transmission bandwidth configuration provides that precise, resource-block-level definition, adapted from the well-established terrestrial transmission bandwidth configuration concept but explicitly scoped to the satellite access node.

The term solves the problem of ambiguity in capacity planning and conformance testing for NTN. Satellite operators need to know the exact number of resource blocks available per carrier to compute throughput and to dimension beams; test houses need the same information to set measurement spans and evaluate in-band emissions. By defining the configuration as the set of resource blocks within the SAN channel bandwidth usable for transmit or receive, 3GPP ensures that vendors, operators, and regulators share a common understanding of the usable spectrum.

It also supports the nested spectral hierarchy that makes NTN RF specifications modular: the operating band defines regulatory spectrum, the SAN RF bandwidth defines the node's aggregate footprint, the SAN channel bandwidth defines each carrier's envelope, and the transmission bandwidth configuration defines the schedulable resource blocks. This layered approach lets 3GPP reuse terrestrial RF methodology while accommodating the unique constraints of satellite access, such as radiated testing and shared spectrum.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-17 Initial

Initial definition introduced for NTN: the SAN transmission bandwidth configuration was defined as the set of resource blocks within the SAN channel bandwidth usable for transmitting or receiving by the SAN, establishing the schedulable-spectrum reference for satellite access.

The definition carried over unchanged from Rel-17, retaining the resource-block-set wording within the SAN channel bandwidth.

The definition remained unchanged from Rel-18; no textual revision is reflected in the quoted wording.

The definition remained unchanged from Rel-19, continuing to describe the usable resource-block set within the SAN channel bandwidth.

Defining Specifications

3GPP specifications that define or reference SAN transmission bandwidth configuration, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 36.108 vk00 Satellite Access Node RF Requirements Rel-20 read
TS 36.181 vj40 RF Test Methods and Conformance for Satellite Access Nodes Rel-19 read
TS 38.108 vk00 NR NTN Satellite Access Node RF Requirements Rel-20 read
TS 38.181 vj40 NR Satellite Access Node RF Conformance Testing Rel-19 read