Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

Mobile IAB-MT type 2-O

Mobile Integrated Access and Backhaul Mobile Termination type 2-O

Radio Access Network →

Mobile IAB-MT type 2-O is an FR2 mobile terminal with only over-the-air requirements defined at the radiated interface boundary, specifying RF performance requirements for the mobile terminal of a mobile IAB node in millimeter-wave bands.

Introduced
Rel-18
Where
Radio Access Network › NG-RAN (5G)
Specifications
3 specs
Mobile IAB-MT type 2-O Description Purpose Neighbours Specifications

Description

The Mobile IAB-MT type 2-O is a specific classification of the Mobile Termination (MT) function within a Mobile Integrated Access and Backhaul (IAB) node, as defined in 3GPP Release 18 and later. An IAB node consists of two logical parts: a Distributed Unit (DU) that serves UEs and an MT that connects to a parent node (donor or another IAB node) for backhaul. The 'Mobile' prefix indicates that the IAB node itself is capable of physical mobility, i.e., it can move and change its parent node. The 'type 2-O' designation is a requirement category used in RF performance specifications (TS 38.174, 38.175, 38.176) to define how the MT must perform when operating in Frequency Range 2 (FR2, 24.25–52.6 GHz).

The '2' in type 2-O refers to FR2 operation, and the 'O' stands for 'OTA' (Over-The-Air). This means that all RF requirements for this MT type are defined as radiated requirements at the Radiated Interface Boundary (RIB), rather than as conducted requirements at the antenna connector. In FR2, due to the use of phased array antennas and the high integration of RF components, conducted testing is often impractical; therefore, OTA testing becomes the norm. The RIB is a virtual boundary surrounding the equipment where the radiated signals are evaluated. Type 2-O thus specifies that the MT's performance (e.g., transmit power, EVM, spectral flatness, spurious emissions) is measured over the air, ensuring that the complete antenna system is included in the assessment.

Mobile IAB-MT type 2-O is particularly relevant for mobile IAB nodes that are expected to move, such as those mounted on vehicles or drones. Because the node is mobile, its antenna orientation and propagation environment change dynamically, making OTA requirements essential to guarantee reliable backhaul link performance. The MT must maintain a stable link to its parent node while the node is in motion, and the type 2-O requirements ensure that the radiated characteristics meet the necessary quality. These requirements are defined in the 38.174 (RF performance for IAB), 38.175 (RF performance for mobile IAB) and 38.176 (RF performance for IAB with FR2) specifications.

In the network architecture, the Mobile IAB-MT type 2-O is not a separate physical entity but a compliance category. When a mobile IAB node is deployed, its MT must satisfy the type 2-O requirements if it operates in FR2 and uses OTA testing. This classification helps equipment vendors and operators ensure interoperability and performance. It also simplifies testing and certification because the same OTA methodology can be applied across different mobile IAB products. The type 2-O designation is part of a broader set of requirement types (e.g., type 1-O for FR1 OTA, type 2-C for FR2 conducted) that cover various frequency ranges and testing approaches.

Overall, the Mobile IAB-MT type 2-O is a key enabler for flexible, high-capacity backhaul in 5G-Advanced networks, especially in scenarios where fiber is unavailable and nodes need to be mobile. By defining clear OTA requirements at the RIB, 3GPP ensures that mobile IAB nodes can be reliably tested and deployed in millimeter-wave spectrum, supporting use cases like temporary events, disaster recovery, and moving hotspots.

Purpose & Motivation

The Mobile IAB-MT type 2-O exists to provide a standardized set of RF performance requirements for the mobile termination of IAB nodes operating in FR2 using OTA testing. As 5G networks evolve towards higher frequencies to achieve greater capacity, the use of FR2 bands becomes essential. However, traditional conducted RF requirements are difficult to apply at mmWave due to the integrated nature of antenna arrays. The type 2-O classification solves this by defining all requirements at the RIB, allowing manufacturers to test complete devices over the air. This approach ensures that the actual radiated performance, including antenna effects, is validated, which is critical for mobile IAB nodes that must maintain robust backhaul links while moving. The introduction in Release 18 addresses the growing demand for mobile IAB solutions, such as those on vehicles or drones, which require reliable mmWave connectivity. Without such requirements, there would be no consistent way to certify and compare mobile IAB equipment, leading to potential interoperability issues and degraded network performance.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-18 Initial

Introduced as a new requirement type for mobile IAB-MT operating in FR2 with OTA requirements at the RIB. This release defined the initial architecture and testing methodology for mobile IAB nodes, enabling their certification and deployment in millimeter-wave spectrum.

The definition carried over unchanged from Rel-18, maintaining the same OTA requirement set for mobile IAB-MT type 2-O. No modifications to the requirements were made in this release.

The definition remained unchanged from Rel-18 and Rel-19, continuing to specify OTA requirements at the RIB for mobile IAB-MT type 2-O. The term was carried over without revision.

Defining Specifications

3GPP specifications that define or reference Mobile IAB-MT type 2-O, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 38.174 vk00 NR Integrated Access and Backhaul Requirements Rel-20 read
TS 38.175 vj00 EMC for NR IAB Nodes Rel-19 read
TS 38.176 vj40 IAB Conformance Testing Rel-19 read