Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

Geostationary (GEO) satellites

Geostationary Earth Orbit satellites

Radio Access Network →

Geostationary (GEO) satellites Geostationary (GEO) satellites is a group of satellites positioned at 35,786 km above the Equator, rotating in sync with Earth, appearing stationary, and providing continuous coverage of a large fixed region for 5G non-terrestrial networks (NTN).

Introduced
Rel-16
Where
Management
Specifications
2 specs
Geostationary (GEO) satellites Description Purpose Neighbours Specifications

Description

Geostationary Earth Orbit (GEO) satellites are placed precisely in the plane of the Equator at an altitude of approximately 35,786 km. At this altitude, the orbital period of the satellite matches the Earth's rotational period (one sidereal day), so the satellite appears to stand still relative to a fixed point on the ground. This property is fundamental to satellite communications because it allows a single satellite to provide continuous, uninterrupted coverage of a large geographic area without the need for complex tracking antennas or frequent handovers between satellites.

In the context of 3GPP, GEO satellites are one of the key spaceborne platforms considered for Non-Terrestrial Networks (NTN), alongside Low Earth Orbit (LEO) and Medium Earth Orbit (MEO) satellites. 3GPP specifications such as TS 28.808 and TS 28.841 define management and orchestration aspects for NTN, including the integration of GEO satellites into the 5G core and radio access network.

Architecturally, a GEO satellite can act as a transparent payload (bent-pipe) or a regenerative payload. In a transparent architecture, the satellite simply amplifies and frequency-converts the signal between the user equipment (UE) and the ground gateway, which connects to the 5G RAN. In a regenerative architecture, the satellite carries a gNB (or part of it) onboard, enabling inter-satellite links and reducing the dependency on ground gateways. The 3GPP NTN architecture supports both configurations, with the satellite being integrated into the NG-RAN as a remote radio head or as a full base station.

Key components of a GEO-based NTN include the satellite payload, the ground gateway (which connects the satellite to the terrestrial 5G core), the feeder link (between satellite and gateway), and the service link (between satellite and UE). The UE can be a handheld device, a VSAT terminal, or an IoT device. Due to the high path loss, GEO systems often require larger antennas or higher transmit power, but they benefit from a fixed coverage footprint that simplifies network planning and resource management.

In summary, GEO satellites provide a stable, wide-area coverage solution that complements terrestrial 5G networks, especially in remote or underserved areas. Their integration into 3GPP systems has required careful adaptation of protocols to handle the long propagation delay, and ongoing work in Rel-18 and beyond continues to refine management and performance aspects.

Purpose & Motivation

GEO satellites exist to provide continuous, wide-area coverage from a fixed point in the sky, eliminating the need for tracking and enabling broadcast and broadband services over vast regions. In 3GPP, they are motivated by the need to extend 5G connectivity to areas where terrestrial infrastructure is uneconomical or impossible, such as rural, maritime, and aeronautical environments. The long delay and high path loss of GEO were previously handled by proprietary satellite systems; 3GPP's inclusion of GEO in NTN standards allows seamless integration with 5G core and management frameworks, leveraging common protocols and orchestration. This addresses the limitation of previous satellite systems that were isolated from mobile networks and could not benefit from 5G service continuity, slicing, and QoS frameworks.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-16 Initial

Initial definition introduced GEO satellites as located in the Equator plane at 35,786 km, rotating at Earth's rate, and providing continuous coverage with a single satellite. This release marked the first 3GPP study on NTN integration, defining the basic characteristics of GEO for 5G.

The definition was revised to remove the explicit statement about continuous coverage, focusing solely on the orbital mechanics and altitude. This wording change reflects a more precise technical description, while the coverage property remains inherent.

The definition carried over unchanged from Rel-17, maintaining the concise description of GEO orbital characteristics. Rel-18 work continued to enhance NTN management and performance aspects without altering the core definition.

Defining Specifications

3GPP specifications that define or reference Geostationary (GEO) satellites, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TR 28.808 vh00 5G satellite integration management study Rel-17 read
TR 28.841 vi01 Technical Report on IoT NTN Enhancements Rel-18 read