Menu

ETSI · Technical Specification

TS 103 383v12.7.0

Smart Cards; Embedded UICC; Requirements Specification

Defines use cases and technical requirements for embedded UICCs, including their profiles, security, procedures, and policy controls.

Version
v12.7.0
  1. v14.0.02018-07
  2. v13.3.02018-07
  3. v13.2.02016-05
  4. v13.1.02016-02
  5. v13.0.02015-10
  6. v12.8.02015-10
  7. v12.7.02015-02
  8. v12.6.02014-12
  9. v12.5.02014-08
  10. v12.4.02014-04
  11. v12.3.02014-02
  12. v12.2.02013-09
  13. v12.1.02013-06
  14. v12.0.02013-02
Issued
2015-02
Release
Release 12
Source
Original PDF · Publisher page

A formatted version of this document is not available yet; the text below is extracted clause by clause, so tables and figures may be incomplete.

Overview

This document sets out use cases and requirements for embedded UICCs, including provisioning and changing subscriptions and reporting terminal state and capabilities. It specifies requirements for eUICC identifiers, profiles, applications, file structures, procedures, and security. It also covers profile interoperability, policy enforcement and control, and policy rules, with annexes describing eUICC, profile, and application states and logical architecture. These requirements support consistent implementation of embedded UICCs across connected devices and terminals.

  • eUICC
  • UICC
  • profiles
  • NAA

Overview generated automatically from the document's scope and outline. The document text is authoritative.

Changes since v12.6.0

10 clauses modified, 1 clause added

Compared automatically clause by clause from the extracted text of both versions; differences only in layout, spacing or table cells are ignored. The documents are authoritative.

2 Referencesmodified

References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. In the case of a reference to a TC SCP document, a non specific reference implicitly refers to the latest version of that document in the same Release as the present document. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity.

2.1 Normative referencesmodified

References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. In the case of a reference to a TC SCP document, a non specific reference implicitly refers to the latest version of that document in the same Release as the present document. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. [1] ETSI TS 102 221: "Smart Cards; UICC-Terminal interface; Physic… …

2.2 Informative referencesmodified

References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. In the case of a reference to a TC SCP document, a non specific reference implicitly refers to the latest version of that document in the same Release as the present document. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject ar… …

3.1 Definitionsmodified

…Manager - Data Preparation (SM-DP): role that prepares operational and provisioning Profiles to be securely provisioned on the eUICC e.g. encryption of Profile … NOTE:NOTE 1: Also known as Profile Provisioning Credentials holder NOTE 2: "securely" is felt to relate to requirements captured in an appropriate section of the present document. The term "securely" may be removed from this definitio… …

3.2 Abbreviationsmodified

…etwork Operator NAA Network Access Application NAC Network Access Credentials. OEM Original Equipment Manufacturer OTA Over-The-Air PCF Policy Control Function … PIN Personal Identification Number PMC Profile Management Credentials PUK PIN Unblocking Key RAM Remote Application Management RFM Remote File Management SD Security Domain SIM Subscriber Identity Module SM Subscription Manager SM-DP Subscription Manager - Data Preparation SM-SR Subscription Manager - Secure Routing SP Service Pro… …

5.6 Use Case 5 - Terminal state and capabilities reportingadded

As the eUICC may be mounted in a terminal, the profile build and provisioning may depend on the terminal capabilities and states. For instance, when the user asks the operator for a subscription, the build of the profile may depend on the network capabilities supported by the terminal, and the provisioning initialization may depend on the terminal state of the battery. As a possible approach, the terminal may therefore need to be able to provide such information to the eUICC in order to potentially adapt the profile build and its delivery.

6.1 Generalmodified

…pecification for the eUICC shall provide an option that allows its implementation on existing terminals, i.e. not mandate the support of Rel-12 features by the … terminal.terminal (see note). REQ-12-EU-01-04 There shall be a standardized human readable representation of the eUICC identifier. NOTE: the requirement does not exclude the spe… …

6.3 Proceduralmodified

…EQ-12-EU-03-02 There shall be a mechanism to support Profile Container Initialisation. REQ-12-EU-03-03 There shall be a mechanism to support Profile Transport. … REQ-12-EU-03-03a It shall be possible for the eUICC and the Terminal to exchange information required to initiate the loading of a Profile. REQ-12-EU-03-04 Void. REQ-12-EU-03-04a The initial state of an installed Profile shall be the disabled state. REQ-12-EU-03-04b There shall be a mechanism to sup … a mechanism to support the disabling of an enabled Profile. REQ-12-EU-03-08 It shall be possible to load a Profile in one or multiple sessions. REQ-12-EU-03-09 … VoidVoid. REQ-12-EU-03-10 There may be a mechanism on the eUICC that identifies a change of device. REQ-12-EU-03-11 There shall be a mechanism to allow the eUICC to provide information on its capabilities and status (e.g. hosted algorithms, CAT, runtime environment and OTA capabilities, memory capacity and memory usage). Identifier Requirement REQ-12-EU-03-11a It shall be possible for an eUICC to provide the capabilities and state of the associated terminal to the Profile Management Credentials holder and/or the Profile Provisioning Credentials holder. REQ-12-EU-03-11b Terminal state and capabilities in REQ-12-EU-03-11a are the following: The information provided in the CAT command "Terminal Profile". Current Access Technology. Radio Access Technologies supported by the terminal. Battery state. REQ-12-EU-03-12 There shall be a mechanism to allow the eUICC to acknowledge the result of Profile Management Operations. REQ-12-EU-03-13 Activities on the eUIC … echanism to allow the eUICC to provide the information mentioned in REQ-12-EU-03-16/16a/16b/16c for all Profiles installed on the eUICC in an aggregated manner. … Identifier Requirement REQ-12-EU-03-18 It shall be possible for an authorized Profile Provisioning Credentials holder to determine that an eUICC contains a specific Profile. REQ-12-E… …

6.4 Securitymodified

…ng the capability for authorisation, authentication, integrity and confidentiality for the loading and installation of Operational or Provisioning Profiles, as … REQ-12-EU-03-04.per REQ-12-EU-03-04b and REQ-12-EU-03-04c. REQ-12-EU-04-03a All information required for loading and installation of profiles protected by the mechanism in REQ-12-EU-04-03 shall be transported to the eUI … onnectivity. REQ-12-EU-04-10 There shall be mechanisms to protect all profiles against unauthorized access, unauthorized deletion or unauthorized modification. … Identifier Requirement REQ-12-EU-04-11 The eUICC shall support Profile Provisioning Credentials to be used for decrypting profiles; e.g. Provisioning or Operational Profiles. REQ-12-E … 04-28a The Profile Provisioning Credentials used to provide authentication of the eUICC for Profile loading and installation shall be unique to a specific eUICC … Identifier Requirement REQ-12-EU-04-29 The eUICC shall use a mechanism ensuring that a Profile prepared for a given eUICC can be installed only on that eUICC. REQ-12-EU-04-30 The eUI… …

6.5 Profile Interoperability and Interactionsmodified

Identifier Requirement REQ-12-EU-05-01 It shall be possible for an eUICC to support loading and installing of Profiles generated by different SM-DPProfile entitiesProvisioning (seeCredential noteholders. 1). REQ-12-EU-05-01a A Profile shall use a standardised description format to allow its loading and installation on any compliant eUICC. REQ-12-EU-05-01b A Profile may contain proprietary elements (see notenote). 2). REQ-12-EU-05-01c An eUICC may support proprietary elements in a Profile. Proprietary elements that are not supported shall be ignored by the eUICC. REQ-12-EU-05 … l as PINs/PUKs. REQ-12-EU-05-02 The interface, in terms of file structure and metadata, for a Profile to be remotely provisioned onto an eUICC shall be common. … NOTE 1: The knowledge of an SM-DP is not applicable to the eUICC, but this requirement serves to indicate that a generic mechanism is required. NOTE 2:NOTE: Proprietary elements may contain, for instance, profile extensions adding features not initially included by the eUICC platform or data for features not specif… …

F Change historymodified

…tion 2.0.0 12.0.0 SCP #59 SCP(13)000103 001 - F Definition of subscriber 12.0.0 12.1.0 SCP(13)000104 002 - F Management of the content of provisioning profiles … 12.0.0 12.1.0 SCP(13)000105 003 - F Clarification of "platform-related commands" 12.0.0 12.1.0 SCP(13)000106 004 - F Clarification of "unexpected interruptions" 12.0.0 12.1.0 SCP(13)000107r1 005 1 F Removal of redundant requirements 12.0.0 12.1.0 SCP(13)000108r1 006 1 F Definitions of container term and container related 12.0.0 12.1.0 activities SCP(13)000109r1 007 1 B Missing requirement on anti-cloning of profiles 12.0.0 12.1.0 SCP(13)000110r1 008 1 F Credentials for container creation 12.0.0 12.1.0 SCP #60 SCP(13)000174 009 - F Two-layer encryption for profile loading and installation 12.1.0 12.2.0 SCP(13)000178 013 - B Requirement on anti-cloning part 2 12.1.0 12.2.0 SCP(13)000179 014 - B Requirement for direct mutual authentication between 12.1.0 12.2.0 eUICC and Profile Installer Credential holder SCP(13)000180 015 - B eUICC Information Requirements 12.1.0 12.2.0 SCP(13)000181 016 - C Clarification of profile state transitions 12.1.0 12.2.0 SCP(13)000182r1 017 - B Address resolution of profile management credentials 12.1.0 12.2.0 holder SCP #61 SCP(13)000262r1 018 2 D Potential Authorized Entities 12.2.0 12.3.0 SCP(13)000257 019 F Correction of MNO management of profile requirement 12.2.0 12.3.0 SCP(13)000261 020 B Requirements for authorization and credentials 12.2.0 12.3.0 establishment SCP(13)000260r1 021 1 C Obtain profile information 12.2.0 12.3.0 SCP(13)000258 022 C Deletion only of disabled profiles 12.2.0 12.3.0 SCP(13)000263 023 D Addition of Profile Container Initialisation definition 12.2.0 12.3.0 SCP(13)000259 024 C State of a successfully installed profile 12.2.0 12.3.0 SCP(13)000256r1 025 1 B Clarification about the uniqueness of Profile Installer 12.2.0 12.3.0 Credentials SCP #62 SCP(14)000071 029 B New requirements for Policy Control and Policy 12.3.0 12.4.0 Enforcement SCP(14)000068 030 B Enforcement of Policy Rules in disabled Profiles 12.3.0 12.4.0 SCP(14)000066r1 031 1 B Procedure to define the entities to receive 12.3.0 12.4.0 acknowledgement of management operations. SCP #63 SCP(14)000125r1 032 1 C Definition of authorized entity 12.4.0 12.5.0 SCP(14)000126 033 D Section 6.2 Cleanup 12.4.0 12.5.0 SCP(14)000127r1 034 1 F Definition of Profile Management Operations and 12.4.0 12.5.0 cleanup of Procedural section SCP(14)000128 035 D Section 6.1 Cleanup 12.4.0 12.5.0 SCP(14)000129r1 036 1 C Section 6.4 Cleanup 12.4.0 12.5.0 SCP(14)000130r1 037 1 D Replace Profile Installer by Profile Provisioner 12.4.0 12.5.0 SCP(14)000131 038 D Consistent use of term loading and installation 12.4.0 12.5.0 SCP(14)000132r1 039 1 B Transport for Profile Management 12.4.0 12.5.0 SCP(14)000133 040 C Introduction of eUICC Policy Control Credentials and 12.4.0 12.5.0 related requirements SCP(14)000134 041 C Security protection of acknowledgements 12.4.0 12.5.0 SCP(14)000135r1 042 1 B Visibility of application in a Profile 12.4.0 12.5.0 SCP(14)000143 043 B Profile Interoperability 12.4.0 12.5.0 SCP #64 SCP(14)000184 044 C eUICC identifier access by the Terminal 12.4.0 12.5.0 SCP(14)000185 045 B Protection of Profile identifier 12.4.0 12.5.0 SCP(14)000181r1 046 1 B Change of eUICC Policy Control Credentials 12.4.0 12.5.0 SCP(14)000183 048 B Description of Profile 12.4.0 12.5.0 SCP #65 SCP(14)000251 049 Applicable range of terminals 12.5.0 12.6.0 SCP(14)000253 050 Definitions of profile loading and transport 12.5.0 12.6.0 SCP(14)000258 052 Standardized profile format for loading and installation 12.5.0 12.6.0 SCP(14)000259r1 053 1 Profile determination by a PMC holder 12.5.0 12.6.0 SCP(14)000255 054 Security level for profile provisioning 12.5.0 12.6.0 SCP(14)000254 056 Requirement on atomic operations 12.5.0 12.6.0 SCP(14)000256 057 Human-readability of eUICC identifier 12.5.0 12.6.0 SCP(14)000252 058 Preventing deletion of an enabled Profile 12.5.0 12.6.0 Meeting Plenary Tdoc CR Rev Cat Subject Old Resulting Version Version Online SCP(14)000248r1 059 Multiple PMC function split 12.5.0 12.6.0 Vote SCP #66 SCP(14)000339 062 D Replace SM-DP by Profile Provisioning Credentials 12.6.0 12.7.0 holder in section 6.5 SCP(14)000340r1 063 F Correction of a void reference SCP(14)000341r1 064 1 B Terminal state and capabilities reporting through eUICC SCP(14)000342r1 065 1 B Initiation of Profile Provisioning

Contents
  1. 1 Scope
  2. 2 References
  3. 2.1 Normative references
  4. 2.2 Informative references
  5. 3 Definitions and abbreviations
  6. 3.1 Definitions
  7. 3.1a Definitions for further study
  8. 3.2 Abbreviations
  9. 4 Abstract (informative)
  10. 5 Background (informative)
  11. 5.1 Overview of the use cases
  12. 5.2 Use Case: 1 - Provisioning of multiple eUICCs for M2M
  13. 5.2.1 Use case 1 - example a) - Utility Meters
  14. 5.2.2 Use case 1 - example b) - Security Camera
  15. 5.2.3 Use case 1 - example c) - Telematics
  16. 5.3 Use case 2 - Provisioning of an eUICC for a first subscription with a new connected device
  17. 5.3.1 Use case 2 - example a) - Provisioning of a new device
  18. 5.3.2 Use case 2 - example b) - Provisioning of multiple new devices for an enterprise
  19. 5.4 Use case 3 - Change of subscription for a device
  20. 5.4.1 Use case 3 - example a) - Change of subscription by consumer
  21. 5.4.2 Use case 3 - example b) - Change of subscriptions for devices for enterprise workforce
  22. 5.5 Use Case 4 - Change of SM-SR
  23. 5.6 Use Case 5 - Terminal state and capabilities reporting
  24. 6 Requirements
  25. 6.1 General
  26. 6.2 Profile, Application and File Structure
  27. 6.3 Procedural
  28. 6.4 Security
  29. 6.5 Profile Interoperability and Interactions
  30. 6.6 Policy Enforcement
  31. 6.7 Policy Control
  32. 6.8 Policy Rules
  33. A Void
  34. B States (see also annex D)
  35. B.1 States of eUICC
  36. B.2 States of Profiles
  37. B.3 States of Applications in Profiles
  38. C Logical aspects of eUICC Architecture and associated Security Credentials
  39. D Profiles and NAA (Network Access Application) States
  40. E Profile Aspects
  41. E.1 Profile Content
  42. E.2 Profile Related Principles
  43. F Change history

ETSI TS 103 383 V12.7.0 (2015-02)

TECHNICAL SPECIFICATION

      Smart Cards;
    Embedded UICC;
Requirements Specification
       (Release 12)
        Reference
RTS/SCP-ReUICCvc70
        Keywords
embedded, Smart Card
         650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16

 Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice

The present document can be downloaded from:
     http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
  existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
       print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
                Information on the current status of this and other ETSI documents is available at
                                     http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
                         https://portal.etsi.org/People/CommiteeSupportStaff.aspx

Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
                        and microfilm except as authorized by written permission of ETSI.
          The content of the PDF version shall not be modified without the written authorization of ETSI.
                  The copyright and the foregoing restriction extend to reproduction in all media.
                                © European Telecommunications Standards Institute 2015.
                                                 All rights reserved.
      TM                TM        TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
               TM
           3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
                                of the 3GPP Organizational Partners.
          GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Smart Card Platform (SCP).

The contents of the present document are subject to continuing work within TC SCP and may change following formal TC SCP approval. If TC SCP modifies the contents of the present document, it will then be republished by ETSI with an identifying change of release date and an increase in version number as follows:

Version x.y.z

where:

x    the first digit:
0     early working draft;
1     presented to TC SCP for information;
2     presented to TC SCP for approval;
3     or greater indicates TC SCP approved document under change control.
y    the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
     updates, etc.
         z    the third digit is incremented when editorial only changes have been incorporated in the document.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "may not", "need", "need not", "will",
"will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms
for the expression of provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. Introduction Work on Machine-to-Machine (M2M) applications has given rise to the possibility of having a UICC that is embedded in a communication device in such a way that the UICC is not easily accessible or replaceable. The ability to change network subscriptions on such devices becomes problematic, thus necessitating new methods for securely and remotely provisioning access credentials on these Embedded UICCs (eUICC) and managing subscription changes from one MNO to another.

In its current state, the present document is to be considered as a "work in progress". It contains a restricted set of requirements related to the provisioning of profiles in an eUICC as well as general requirements on the architecture of the eUICC. As a consequence, some of the elements required to specify a complete technical solution are missing, among which are requirements for:

•management of profiles;

•management of credentials;

•the policy control function;

which will be defined in further versions of the present document.

1 Scope

The present document defines the use cases and requirements for an embedded UICC.

2 References

2.1 Normative references

References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies.

•In the case of a reference to a TC SCP document, a non specific reference implicitly refers to the latest version of that document in the same Release as the present document.

Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference.

NOTE:While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity.

The following referenced documents are necessary for the application of the present document.

[1]                 ETSI TS 102 221: "Smart Cards; UICC-Terminal interface; Physical and logical characteristics".
[2]                 ETSI TS 102 671: "Smart Cards; Machine to Machine UICC; Physical and logical characteristics".
[3]                 ETSI TS 102 223: "Smart Cards; Card Application Toolkit (CAT)".
[4]                 ETSI TS 102 241: "Smart Cards; UICC Application Programming Interface (UICC API) for Java
                    Card (TM)".

2.2 Informative references

References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies.

•In the case of a reference to a TC SCP document, a non specific reference implicitly refers to the latest version of that document in the same Release as the present document.

NOTE:While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity.

The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area.

[i.1]               Recommendation ITU-T E.212: "The international identification plan for public networks and
                    subscriptions".
[i.2]               ETSI TR 102 216: "Smart cards; Vocabulary for Smart Card Platform specifications".

3 Definitions and abbreviations

3.1 Definitions

For the purposes of the present document, the terms and definitions given in TR 102 216 [i.2] and the following apply:

Embedded UICC: UICC which is not easily accessible or replaceable, is not intended to be removed or replaced in the terminal, and enables the secure changing of subscriptions

Enabled Profile: profile, the files and/or applications (e.g. NAA) of which are selectable over the UICC-Terminal interface

eUICC Management Credentials: credentials used to verify the authorization for the establishment of Profile Management Credentials and Profile Provisioning Credentials

eUICC Supplier: supplier of the eUICC modules and resident software (such as firmware and operating system)

Mobile Network Operator (MNO): entity providing communication services to its customers through mobile networks

Network Access Application (NAA): application residing on an eUICC that provides authorization to access a network

EXAMPLE:A USIM application.

NOTE:Copied from TR 102 216 [i.2], to be deleted when the current document is finalised.

Network Access Credentials (NAC): data required to authenticate to an ITU E.212 [i.1] Network

NOTE:Network Access Credentials may include data such as Ki/K, and IMSI stored within a NAA.

Operational Profile: Profile containing one or more network access applications and associated network access credentials

Operational Subscription: subscription that enables a device to access an ITU E.212 [i.1] network for the purpose of accessing telecommunication and related services

Policy: principles reflected in a set of rules that govern the behaviour of an eUICC and/or entities involved in the remote management of the eUICC

Policy Control Function: function that defines, updates or removes Policy Rules to implement a Policy

Policy Enforcement Function: function that executes Policy Rules to implement a Policy

Policy Rule: defines the actions required to implement a Policy and the conditions under which they are executed

eUICC Policy Control Credentials: credentials used for authorisation and authentication for the establishment and update of the Policy Rules defined on the eUICC outside Profiles

NOTE:This definition might be refined according to the decision about the need to have Policy Rules defined inside and/or outside Profiles.

Profile: combination of a file structure, data and applications to be provisioned onto, or present on, an eUICC

Profile Access Credentials: data required to exist within a Profile so that secured communication can be set up between an external entity and the eUICC in order to manage that Profile's structure and its data (e.g. operator OTA keys)

Profile Container: logical container for a Profile on an eUICC providing security services, enabling separation of Profiles and providing secure communication

Profile Container Initialisation: process of preparing a Profile Container so that it is ready for Profile Installation

Profile Loading: transfer of a profile from a Profile Provisioning Credentials holder into the eUICC so that it is ready for installation

Profile Transport: transfer of a cryptographically protected Profile from a Profile Management Credential holder to the eUICC

Profile Installation: process of allocating resources and registering parameters for a Profile to bring it to a state where it can be enabled

Profile Provisioning Credentials: data required to exist within an eUICC so that a Profile downloaded from an external entity can be decrypted and installed on the eUICC

Profile Management Credentials: data required to exist within an eUICC so that a secured communication can be set up between an external entity and the eUICC in order to manage the Profiles on the eUICC

Profile Management Operations: consists of Profile Transport, Profile deletion, Profile enabling, and Profile disabling

Provisioning: container creation and initialisation, loading, and installation of a Profile into an eUICC

Provisioning Profile: Profile containing one or more network access applications, and associated network access credentials which, when installed on an eUICC, enables access to communication network(s), to provide transport capability for eUICC management and profile management between the eUICC and an SM-SR

Provisioning Subscription: subscription, with its associated provisioning Profile, that enables a device to access a mobile network for the purpose of management of operational Profiles on the eUICC

Subscriber: entity that has a subscription with a telecommunications service provider

Subscription: commercial relationship for the supply of services between the Subscriber and Telecommunications Service Provider

Subscription Manager: combination of the functions of the SM-SR and the SM-DP

Subscription Manager - Data Preparation (SM-DP): role that prepares operational and provisioning Profiles to be securely provisioned on the eUICC e.g. encryption of Profile

NOTE 1:Also known as Profile Provisioning Credentials holder

NOTE 2:"securely" is felt to relate to requirements captured in an appropriate section of the present document. The term "securely" may be removed from this definition once those requirements are specified.

Subscription Manager - Secure Routing (SM-SR): role that securely performs functions which directly manage the operational and provisioning Profiles on the eUICC

NOTE:"securely" is felt to relate to requirements captured in an appropriate section of the present document. The term "securely" may be removed from this definition once those requirements are specified.

Telecommunications Service Provider: MNO, or party trusted by the MNO acting on behalf of the MNO, which provides services to the subscriber

3.1a Definitions for further study

Definitions are required for the following terms:

•Initialised State:

NOTE:This definition is required. Best proposal so far: "refers to the state the eUICC is in when an operational profile is either not active or not present, and the eUICC is only accessible for the purpose of management of operational Profiles".

3.2 Abbreviations

For the purposes of the present document, the following abbreviations apply:

ATR                Answer To Reset
CAT                Card Application Toolkit
CSIM               CDMA Subscriber Identity Module
eUICC            embedded UICC
FFS              For Further Study
IMSI             International Mobile Subscriber Identity
ISIM             IM Services Identity Module
M2M              Machine to Machine (communication)
MNO              Mobile Network Operator
NAA              Network Access Application
NAC              Network Access Credentials.
OEM              Original Equipment Manufacturer
OTA              Over-The-Air
PCF              Policy Control Function
PIN              Personal Identification Number
PMC              Profile Management Credentials
PUK              PIN Unblocking Key
RAM              Remote Application Management
RFM              Remote File Management
SD               Security Domain
SIM              Subscriber Identity Module
SM               Subscription Manager
SM-DP            Subscription Manager - Data Preparation
SM-SR            Subscription Manager - Secure Routing
SP               Service Provider
TBD              To Be Defined
USIM             Universal Subscriber Identity Module

4 Abstract (informative)

The present document enables remote management of an embedded UICC (eUICC) for purposes of changing an MNO subscription without requiring a physical removal and replacement of the UICC in the end Device.

The present document develops use cases and requirements for the "enhanced, remote management" of a UICC, which is embedded in a communication device, i.e. where the UICC is not intended to be removed. This type of embedded UICC (eUICC) is compatible with Machine-to-Machine (M2M) applications. The eUICC may be embedded at the manufacturing site in advance, depending on the country and network operator, and is compatible for use in a variety of end-user equipment. In these scenarios there may be a requirement to remotely change a subscription easily, similar to what is currently achieved by physically changing the UICC.

The purpose for defining these requirements is to provide ease of use and deployment benefits for end users/consumers and thereby stimulate the M2M sector. A further intent is to enable the creation of common standards and processes for remote management of profiles on an eUICC, such that interoperability is ensured.

It is noted that new business models and usage scenarios, primarily driven by M2M, struggle when supported by the traditional UICC/SIM card. For example:

•By installing a physical UICC, the user is connected to a specific network, as the card only provides access to one network. Should the user wish to (or need to) use another network, then they or the M2M Service Provider has to fit another card in the user's device.

•Changing a UICC may be problematic since that M2M equipment may be remotely located and/or hermetically sealed. It should be noted that where the UICC is not intended to be sealed and inaccessible, the portability of traditional form factor UICC cards is perceived to be a user benefit.

•Non-standard provisioning and re-provisioning methods are being defined and used. These present security implications and a risk of fragmentation within the industry.

New remote provisioning/re-provisioning mechanisms are required to support the new business models and usage scenarios.

5 Background (informative)

5.1 Overview of the use cases

A range of use cases is identified in this clause to derive requirements for the development of a trusted framework for the management of an embedded UICC (eUICC). This is not intended to be an exhaustive list of use cases and applications, but a set of examples to ensure requirements will be flexible enough to securely support current and future use cases.

Use cases are provided as a means to understand and add context to the overall requirements.

5.2 Use Case: 1 - Provisioning of multiple eUICCs for M2M

A Machine-to-Machine Service Provider (M2M SP) sets-up subscriptions for a number of connected M2M devices to start telecommunication services with a first MNO. While it is expected that there will be a very great range of M2M applications, and many of these will have different parties and business models, it is likely that the key technical requirements will become clear through examining a few examples of this use case; the following examples are considered further in this clause:

a)Provisioning for a first subscription, and optional later change of subscription, for communication services for automated reading of utility (electricity, water, gas) meters; a M2M Service Provider will contract these subscriptions.

b)Provisioning for a first subscription and optional later change of subscription for a security camera.

c)Provisioning for a first subscription, and optional later change of subscription for communication services to vehicles (e.g. telematics); the vehicle vendor will provide the automotive services.

5.2.1 Use case 1 - example a) - Utility Meters

The Meter Reading M2M SP has a commercial contract to both supply meters and - once they have been installed - to provide regular meter readings of these meters to the utility company. The M2M SP selects the preferred MNO to provide a number of subscriptions after completing a tender process for the communication services as part of a defined service level agreement.

Once the MNO is selected, the M2M SP arranges for the utility meters to be installed and as part of the installation process for the communication services to start. While the physical installation is a manual process, the subscription management required for the communication services will be automated.

These contracts for communication services are negotiated to last for a given period of time e.g. several years; if a change of contract is negotiated, the change is likely to apply to multiple subscriptions. The changeover is expected to be managed in an automatic fashion at an agreed date over a relatively short period.

5.2.2 Use case 1 - example b) - Security Camera

A consumer purchases a security camera for monitoring his house. The security camera is supplied with a communication service so that recorded data is uploaded and stored as part of the service from a security (M2M) SP. The consumer (or M2M SP) installs the camera and sets up access to the security services online.

The M2M SP selects the MNO for the video camera service; the subscription management will be automated for the contracted number of subscriptions between the M2M SP and the MNO.

These contracts for communication services are negotiated to last for a given period of time e.g. several years; if a change of contract is negotiated, the change is likely to apply to multiple subscriptions. The changeover is expected to be managed in an automatic fashion at an agreed date over a relatively short period. Noting that the level of MNO coverage within individual properties can be different, an automated check of coverage for the target MNO may form part of any change of an operational profile.

5.2.3 Use case 1 - example c) - Telematics

A consumer purchases a new vehicle and this includes a number of vehicle manufacturer provided services delivered over wide area wireless communications to the vehicle and its occupants. The services will be delivered whether the vehicle is mobile or stationary, and whether or not the vehicle is in the country in which it was purchased. The vehicle manufacturer himself or a subcontractor acts as M2M SP, providing both vehicle related services (such as engine monitoring) and being a broker for services supplied by other SPs (such as infotainment).

The subscription starts at vehicle purchase to be operational as the customer drives the vehicle away; the subscription management will be automated for the contracted number of subscriptions between the M2M SP and the MNO. The M2M SP agrees to the commercial contract with MNO(s) in either the same or different countries for subscriptions for the communication services; the vehicle customer may not know which MNO is providing communication services.

These contracts for communication services are negotiated to last for a given period of time e.g. several years; if a change of contract is negotiated by the M2M SP, the change is likely to apply to multiple subscriptions. The changeover is expected to be managed in an automatic fashion at an agreed date over a relatively short period.

5.3 Use case 2 - Provisioning of an eUICC for a first subscription with a new connected device

An end user purchases a new type of communications or connected device from an OEM together with a subscription to provide first services to this device. While it is expected that there will be a range of consumer purchased devices for communication, media and Internet applications and more, and many of these will have different parties and business models, it is likely that the key technical requirements will become clear through examining a few examples; the following examples are considered further in this clause:

a)Provisioning an eUICC in a new device; the consumer will select the MNO to provide communication services.

b)Provisioning an eUICC in multiple connected new device for an enterprise workforce; the enterprise will select the MNO to provide the subscriptions.

5.3.1 Use case 2 - example a) - Provisioning of a new device

A consumer purchases a new device with an eUICC and then selects an MNO for communication services. The MNO might be selected at the same or another retailer, at an MNO shop or online and will be activated within a short period. First use of the new device will be with the first subscription already set-up, or if no subscription is set-up, the customer will select an MNO and, if required, after appropriate authorization a subscription will be set-up. The subscription management will be automated for this single consumer subscription between the consumer and the MNO. The consumer agrees to the contract with the MNO for the subscription for the communication services.

5.3.2 Use case 2 - example b) - Provisioning of multiple new devices for an enterprise

An enterprise (Purchasing Manager) purchases new devices for a set of employees. Contracts for multiple subscriptions will be negotiated for communication services, which enable a range of telecommunication and enterprise applications. The subscriptions will be activated as new employees start, at the latest on their first use of the device. The subscription activation may be followed by device management to configure enterprise specific applications and directories.

The subscription management will be automated for the contracted number of subscriptions between the enterprise and the MNO. The enterprise agrees to the commercial contract with MNO(s) for subscriptions for the communication services; the enterprise employees will be aware of which MNO is providing communication services.

5.4 Use case 3 - Change of subscription for a device

A subscriber changes the contract and thus subscription for the device to stop services with the current MNO and start services with a new MNO.

a)Change of a subscription for a device by the consumer.

b)Change of the subscriptions of multiple connected new devices for an enterprise workforce to a new MNO; the enterprise will select the MNO to provide the subscriptions.

5.4.1 Use case 3 - example a) - Change of subscription by consumer

A contract for communication services of a device is expected to last for a period of one or more years; if a change of contract is decided upon by the consumer, the change is likely to apply to a single subscription, or possibly a few subscriptions the consumer has for connected devices. The changeover is expected to be managed seamlessly in an automatic fashion at an agreed date. The changeover will be undertaken in accordance with relevant Policy Control Functions.

5.4.2 Use case 3 - example b) - Change of subscriptions for devices for enterprise workforce

Contracts for communication services for the workforce are expected to be negotiated to last for a period of one or more years. If a change of contract is negotiated by the enterprise, the change is likely to apply to multiple subscriptions, and the changeover is expected to be managed in an automatic fashion at an agreed date over a relatively short period. The changeover will be undertaken in accordance with relevant Policy Control Functions.

5.5 Use Case 4 - Change of SM-SR

The M2M device manufacturer orders eUICCs from an eUICC Manufacturer. The eUICCs contain Profile Management Credentials which are associated with an SM-SR Y.

MNO A has to provide telecommunication services to a M2M service provider that has M2M devices equipped with eUICCs. The SM-SR Z is used by MNO A.

However, as MNO A usually manages their profiles with SM-SR Z, the management of the eUICCs will be handed over from SM-SR Y to SM-SR Z.

SM-SR Z will request the necessary data to manage the eUICCs (e.g. the appropriate access credentials, characteristics of the eUICCs, previous SM-SRs) in the M2M devices from SM-SR Y.

However, SM-SR Z doesn't want the SM-SR Y to have knowledge of the eUICC Profile Management Credentials it will have.

Therefore SM-SR Y and SM-SR Z perform a change of eUICC management responsibilities involving the eUICCs in the process.

As a consequence SM-SR Z becomes the entity managing the eUICCs on behalf of the MNO A.

5.6 Use Case 5 - Terminal state and capabilities reporting

As the eUICC may be mounted in a terminal, the profile build and provisioning may depend on the terminal capabilities and states. For instance, when the user asks the operator for a subscription, the build of the profile may depend on the network capabilities supported by the terminal, and the provisioning initialization may depend on the terminal state of the battery. As a possible approach, the terminal may therefore need to be able to provide such information to the eUICC in order to potentially adapt the profile build and its delivery.

6 Requirements

6.1 General

   Identifier                                               Requirement
REQ-12-EU-01-01 The eUICC is a UICC that shall conform to either TS 102 221 [1] or TS 102 671 [2] and in
                   particular to the technical realisation of the requirements specified in the present
                   document.
REQ-12-EU-01-02 The eUICC shall be identified with a globally unique and non-modifiable identifier.
REQ-12-EU-01-03 As far as feasible, the technical specification for the eUICC shall provide an option that
                   allows its implementation on existing terminals, i.e. not mandate the support of Rel-12
                   features by the terminal (see note).
REQ-12-EU-01-04 There shall be a standardized human readable representation of the eUICC identifier.
NOTE:   the requirement does not exclude the specification of eUICC-specific mechanisms that require
        additional feature support by Rel-12 and beyond Terminals.

6.2 Profile, Application and File Structure

   Identifier                                              Requirement
REQ-12-EU-02-01 Each Profile shall be globally and uniquely identified.
REQ-12-EU-02-02 It shall be possible for the MNO to manage the contents of its Enabled Profile on the
                 eUICC in the same manner as for a UICC; e.g. Remote File and Application
                 Management.
REQ-12-EU-02-03 It shall be possible for a Profile to include data, such as identities, keys, PINs, certificates,
                 and algorithm parameters, as well as first and second level applications.
REQ-12-EU-02-04 The eUICC shall support two types of Profile: Operational Profile and Provisioning Profile
                 (see note).
REQ-12-EU-02-05 Profiles shall have an indication of the profile type.
REQ-12-EU-02-06 The eUICC shall be able to read the profile types.
REQ-12-EU-02-07 An Operational Profile may be used for provisioning.
REQ-12-EU-02-08 The eUICC may contain one or more Profiles regardless of their type.
REQ-12-EU-02-09 It shall be possible to securely bind Operational Profiles to specific Terminals.
REQ-12-EU-02-10 The Profile identifier associated with a Profile shall remain the same through the lifetime
                 of the Profile.
NOTE:   The technical solution shall not preclude future support for other standardised types of Profiles.

6.3 Procedural

    Identifier                                             Requirement
REQ-12-EU-03-01 There shall be a mechanism to support the creation of Profile Containers.
REQ-12-EU-03-02 There shall be a mechanism to support Profile Container Initialisation.
REQ-12-EU-03-03 There shall be a mechanism to support Profile Transport.
REQ-12-EU-03-03a It shall be possible for the eUICC and the Terminal to exchange information required to
                 initiate the loading of a Profile.
REQ-12-EU-03-04 Void.
REQ-12-EU-03-04a The initial state of an installed Profile shall be the disabled state.
REQ-12-EU-03-04b There shall be a mechanism to support Profile Loading.
REQ-12-EU-03-04c There shall be a mechanism to support Profile Installation.
REQ-12-EU-03-05 There shall be a mechanism to support the deletion of disabled Profiles.
REQ-12-EU-03-05a It shall not be possible to delete an enabled Profile.
REQ-12-EU-03-06 There shall be a mechanism to support the enabling of a disabled Profile.
REQ-12-EU-03-07 There shall be a mechanism to support the disabling of an enabled Profile.
REQ-12-EU-03-08 It shall be possible to load a Profile in one or multiple sessions.
REQ-12-EU-03-09 Void.
REQ-12-EU-03-10 There may be a mechanism on the eUICC that identifies a change of device.
REQ-12-EU-03-11 There shall be a mechanism to allow the eUICC to provide information on its capabilities
                 and status (e.g. hosted algorithms, CAT, runtime environment and OTA capabilities,
                 memory capacity and memory usage).
    Identifier                                              Requirement
REQ-12-EU-03-11a It shall be possible for an eUICC to provide the capabilities and state of the associated
                   terminal to the Profile Management Credentials holder and/or the Profile Provisioning
                   Credentials holder.
REQ-12-EU-03-11b Terminal state and capabilities in REQ-12-EU-03-11a are the following:
                         •    The information provided in the CAT command "Terminal Profile".
                         •    Current Access Technology.
                         •    Radio Access Technologies supported by the terminal.
                   Battery state.
REQ-12-EU-03-12 There shall be a mechanism to allow the eUICC to acknowledge the result of Profile
                   Management Operations.
REQ-12-EU-03-13 Activities on the eUICC related to any other Profile or the overall management of the
                   eUICC, such as the mechanism defined in REQ-12-EU-03-11, shall not disrupt the
                   services provided by the enabled Profile to the terminal, to the network or to the user.
REQ-12-EU-03-14 eUICC shall provide isolation of data and applications between Profiles.
REQ-12-EU-03-15 There shall be a mechanism for the eUICC to recover from interruptions of Profile
                   management operations.
REQ-12-EU-03-15a There shall be a mechanism for the eUICC to optionally ensure the Profile Loading,
                   Installation and Deletion operations to be atomic, i.e. are either executed completely or
                   return to the state before the start of the operation.
REQ-12-EU-03-16 There shall be a mechanism to allow the eUICC to provide Profile identifier information.
REQ-12-EU-03-16a There shall be a mechanism to allow the eUICC to provide Profile state information
                   (enabled or disabled) to an authorized entity (see note 2).
REQ-12-EU-03-16b There shall be a mechanism to allow the eUICC to provide Profile type information
                   (i.e. provisioning or operational) to an authorized entity (see note 2).
REQ-12-EU-03-16c There shall be a mechanism to allow the eUICC to provide meta-data information
                   (e.g. Profile MNO name and ICCID) associated with a profile to an authorized entity
                   (see note 2).
REQ-12-EU-03-17 There shall be a mechanism to allow the eUICC to provide the information mentioned in
                   REQ-12-EU-03-16/16a/16b/16c for all Profiles installed on the eUICC in an aggregated
                   manner.
REQ-12-EU-03-18 It shall be possible for an authorized Profile Provisioning Credentials holder to determine
                   that an eUICC contains a specific Profile.
REQ-12-EU-03-19 It shall be possible to switch between Profiles in a failsafe manner.
REQ-12-EU-03-20 There shall be a mechanism to allow the eUICC to provide at least the following
                   information to an authorized entity on demand: eUICC identifier, eUICC manufacturer,
                   date of eUICC manufacture, eUICC operating system, and operating system version (see
                   note 2).
REQ-12-EU-03-21 There shall be a mechanism for an eUICC to resolve the network address of an
                   associated Profile Management Credentials holder.
REQ-12-EU-03-22 It shall be possible to define within the Profile which entities are to receive
                   acknowledgement of Profile management operations related to that Profile, as described
                   in REQ-12-EU-03-12 (see note 3).
REQ-12-EU-03-23 Toolkit menu entries of an application contained in a disabled profile shall not be part of a
                   SET UP MENU proactive command according to TS 102 223 [3].
REQ-12-EU-03-24 It shall not be possible to trigger, according to TS 102 241 [4], a toolkit application that is
                   part of a disabled profile.
REQ-12-EU-03-25 The poll interval for toolkit applications in a profile shall be disabled, according to
                   TS 102 223 [3], by the eUICC when this profile is disabled and shall be enabled,
                   according to TS 102 223 [3], when the profile is enabled.
REQ-12-EU-03-26 The timer set by a toolkit application in a profile shall be deactivated, according to
                   TS 102 223 [3], by the eUICC when this profile is disabled and shall be started, according
                   to TS 102 223 [3], when the profile is enabled.
REQ-12-EU-03-27 It shall not be possible to select an application that is part of a disabled profile.
REQ-12-EU-03-28 Any selected application in an enabled Profile shall be deselected, according to
                   TS 102 221 [1], by the eUICC when this Profile is disabled.
REQ-12-EU-03-29 It shall be possible for the terminal to obtain the eUICC identifier.
REQ-12-EU-03-30 It shall be possible for an authorized Profile Management Credentials holder to determine
                   that an eUICC contains a specific Profile.
NOTE 1: Void.
NOTE 2: Requirement to be revised in order to define the authorized entity. Potential authorized entities
         include: Profile Provisioning Credentials holder, Profile Management Credentials holder, eUICC
         Management Credentials holder.
NOTE 3: Requirement to be revised in order to define the entities. Potential entities include: Profile
         Provisioning Credentials holder, Profile Management Credentials holder, eUICC Management
         Credentials holder, Profile Access Credentials holder.

6.4 Security

    Identifier                                           Requirement
REQ-12-EU-04-01  There shall be a secure mechanism providing the capability for authorisation,
                 authentication, integrity and confidentiality for the management of Operational or
                 Provisioning Profiles, as per REQ-12-EU-03-03, REQ-12-EU-03-05, REQ-12-EU-03-06
                 and REQ-12-EU-03-07.
REQ-12-EU-04-02 The mechanism in REQ-12-EU-04-01 shall use Profile Management Credentials.
REQ-12-EU-04-03 There shall be an additional secure mechanism providing the capability for authorisation,
                 authentication, integrity and confidentiality for the loading and installation of Operational
                 or Provisioning Profiles, as per REQ-12-EU-03-04b and REQ-12-EU-03-04c.
REQ-12-EU-04-03a All information required for loading and installation of profiles protected by the
                 mechanism in REQ-12-EU-04-03 shall be transported to the eUICC using the mechanism
                 defined in REQ-12-EU-04-01.
REQ-12-EU-04-04 The mechanism in REQ-12-EU-04-03 shall use Profile Provisioning Credentials.
REQ-12-EU-04-05 There shall be a secure mechanism providing the capability for authorisation and
                 authentication for the creation of a container for Operational or Provisioning Profiles, as
                 per REQ-12-EU-03-01.
REQ-12-EU-04-06 There shall be a secure mechanism providing the capability for authorisation,
                 authentication, integrity and confidentiality for the initialisation of a container for
                 Operational or Provisioning Profiles, as per REQ-12-EU-03-02.
REQ-12-EU-04-07 The mechanism in REQ-12-EU-04-05 shall use Profile Management credentials.
REQ-12-EU-04-08 The mechanism in REQ-12-EU-04-06 shall use credentials (see note).
REQ-12-EU-04-09 There shall be a safeguard mechanism against profile installation error that may leave
                 devices unintentionally without connectivity.
REQ-12-EU-04-10 There shall be mechanisms to protect all profiles against unauthorized access,
                 unauthorized deletion or unauthorized modification.
REQ-12-EU-04-11 The eUICC shall support Profile Provisioning Credentials to be used for decrypting
                 profiles; e.g. Provisioning or Operational Profiles.
REQ-12-EU-04-12 The Profile Provisioning Credentials used in REQ-12-EU-04-11 shall also be used for
                 integrity checking of a Profile.
REQ-12-EU-04-13 The eUICC shall be able to host algorithms for network authentication external to
                 Profiles.
REQ-12-EU-04-14 The eUICC shall be able to provide MNO algorithm capabilities to the Network Access
                 Applications (NAA) hosted in an enabled Operational or Provisioning Profile.
REQ-12-EU-04-15 There shall be a mechanism on the eUICC whereby NAA parameters from an enabled
                 Profile are used to customize the corresponding MNO algorithm hosted on the eUICC.
REQ-12-EU-04-16 The eUICC shall ensure the confidentiality and integrity of algorithm parameters.
REQ-12-EU-04-16a The security mechanism used to protect the algorithm parameters (especially the key K)
                 during provisioning of the Profile shall provide at least the same security strength as the
                 strength of the algorithm key itself.
REQ-12-EU-04-17 There shall be a mechanism that allows mutual authentication between an eUICC and
                 the Profile Management Credentials holder.
REQ-12-EU-04-18 The mechanism in REQ-12-EU-04-17 shall use Profile Management Credentials.
REQ-12-EU-04-19 Mutual authentication between the eUICC and the Profile Management Credentials
                 holder shall be mandatory.
REQ-12-EU-04-20 There shall be a mechanism that allows mutual authentication between the eUICC and
                 the Profile Provisioning Credentials holder.
REQ-12-EU-04-21 Mutual authentication between the eUICC and the Profile Provisioning Credentials holder
                 shall be mandatory.
REQ-12-EU-04-22 There shall be a secure mechanism to allow the Profile Provisioning Credentials to be
                 installed, replaced or deleted.
REQ-12-EU-04-23 The overall solution shall prevent replay attacks for the management of Operational and
                 Provisioning Profiles.
REQ-12-EU-04-24 It shall be possible to establish new Profile Management Credentials and/or Profile
                 Provisioning Credentials on the eUICC.
REQ-12-EU-04-25 It should be possible to revoke Profile Management Credentials and Profile Provisioning
                 Credentials on the eUICC in a secure way.
REQ-12-EU-04-26 It shall be possible for an eUICC to host multiple sets of Profile Provisioning Credentials
                 at a given time for the loading and installation of multiple Profiles.
REQ-12-EU-04-27 There shall be only one set of Profile Provisioning Credentials per Profile.
REQ-12-EU-04-28 The Profile Provisioning Credentials used to provide confidentiality and integrity
                 protection of a profile payload shall be unique to a specific Profile and to a specific
                 eUICC.
REQ-12-EU-04-28a The Profile Provisioning Credentials used to provide authentication of the eUICC for
                 Profile loading and installation shall be unique to a specific eUICC
    Identifier                                             Requirement
REQ-12-EU-04-29   The eUICC shall use a mechanism ensuring that a Profile prepared for a given eUICC
                  can be installed only on that eUICC.
REQ-12-EU-04-30 The eUICC shall use a secure mechanism ensuring that, each time a profile is prepared
                  by a Profile Provisioning Credential holder for loading and installation on the eUICC, that
                  profile shall be successfully installed only once on the eUICC.
REQ-12-EU-04-31 The mutual authentication defined in REQ-12-EU-04-20 and REQ-12-EU-04-21 shall be
                  performed directly between Profile Provisioning Credential holder and the eUICC.
REQ-12-EU-04-32 The mechanism for REQ-12-EU-04-24 shall provide confidentiality, integrity and
                  authentication of the new credentials.
REQ-12-EU-04-33 Authorization for the mechanism for REQ-12-EU-04-24 shall use the eUICC Management
                  Credentials.
REQ-12-EU-04-34 There shall be a secure mechanism to provide authentication and integrity protection for
                  the acknowledgements defined in REQ-12-EU-03-12 and REQ-12-EU-03-22.
REQ-12-EU-04-35 There shall be a mechanism providing authentication and authorization for the changing
                  of the eUICC Policy Control Credentials on the eUICC.
REQ-12-EU-04-36 The mechanism for REQ-12-EU-04-35 shall use the eUICC Management Credentials.
REQ-12-EU-04-37 It shall be possible for multiple Profile Management Credentials (PMCs) to exist on the
                  eUICC, with only one PMC authorized for the Profile Container creation and Profile
                  Transport operations, only one PMC authorized for the Profile Enabling/Disabling
                  operations, and only one PMC authorized for the Profile Deletion operation.
                  The PMC authorized for one operation may be the same PMC authorized for another
                  operation.
NOTE:   The type of credentials used is FFS.

6.5 Profile Interoperability and Interactions

    Identifier                                            Requirement
REQ-12-EU-05-01    It shall be possible for an eUICC to support loading and installing of Profiles generated by
                   different Profile Provisioning Credential holders.
REQ-12-EU-05-01a A Profile shall use a standardised description format to allow its loading and installation
                   on any compliant eUICC.
REQ-12-EU-05-01b A Profile may contain proprietary elements (see note).
REQ-12-EU-05-01c An eUICC may support proprietary elements in a Profile. Proprietary elements that are
                   not supported shall be ignored by the eUICC.
REQ-12-EU-05-01d The standardised description format shall provide for at least the following standardised
                   items: NAA parameters, NAA algorithm parameters and keys, OTA keys, RAM and RFM
                   parameters, as well as PINs/PUKs.
REQ-12-EU-05-02 The interface, in terms of file structure and metadata, for a Profile to be remotely
                   provisioned onto an eUICC shall be common.
NOTE:   Proprietary elements may contain, for instance, profile extensions adding features not initially
        included by the eUICC platform or data for features not specified by the implemented standard
        description format.

6.6 Policy Enforcement

NOTE:The following describes the requirements for Policy Enforcement Functions necessary to be present on the eUICC. This does not exclude or define any PCF capabilities in the external eco-system also associated with eUICC and profile management.

    Identifier                                           Requirement
REQ-12-EU-06-01    The eUICC shall provide Policy Enforcement Functions.
REQ-12-EU-06-02    The Policy Rules defined in clause 6.8 shall be enforced by the eUICC.
REQ-12-EU-06-03    Policy Rules contained in the eUICC inside of Profiles shall be enforced by the eUICC
                   (see note).
REQ-12-EU-06-04 Policy Rules contained in the eUICC outside of Profiles shall be enforced by the eUICC
                   (see note).
REQ-12-EU-06-05 It shall be possible for an eUICC to enforce policy rules in a disabled profile.
NOTE:   This requirement might be refined according to the decision about the need to have Policy Rules
        defined inside and/or outside Profiles.

6.7 Policy Control

    Identifier                                           Requirement
REQ-12-EU-07-01    The Profile Access Credentials holder shall be able to update the Policy Rules inside
                   that profile using its secured Over The Air access (see note 1).
REQ-12-EU-07-02 Updating the Policy Rules inside a given Profile can only be done when this profile is in
                   enabled state (see note 1).
REQ-12-EU-07-03 There shall be a secure mechanism to establish and change Policy Rules stored on the
                   eUICC outside of profiles (see note 1).
REQ-12-EU-07-04 The Policy Rules contained in a profile shall be able to be updated only by the owner of
                   the profile (see note 1).
REQ-12-EU-07-05 The mechanism defined in REQ-12-EU-07-03 shall use and only use eUICC Policy
                   Control Credentials (see notes 1 and 2).
NOTE 1: This requirement might be refined according to the decision about the need to have Policy Rules
        defined inside and/or outside Profiles.
NOTE 2: The eUICC Policy Control Credentials holder needs to be defined.

6.8 Policy Rules

NOTE 1:The following describes Policy Rules necessary to be present on the eUICC. This does not exclude or define any PCF capabilities in the external eco-system also associated with eUICC and profile management.

NOTE 2:This clause requires further study in order to specify the type of rules to be enforced.

Identifier                                            Requirement

A Void

B States (see also annex D)

All entities have states, and entities which interact may have combined states.

B.1 States of eUICC

Initialised       Contains Profile Management Credentials; it will also contain Profile Provisioning Credentials or
                  the capability for their generation
Provisioned       Contains an enabled Profile
Terminated        End of Life

B.2 States of Profiles

Disabled          Installed, but applications within the profile are not selectable
Enabled           Installed, and applications within the profile are selectable

B.3 States of Applications in Profiles

Inactive          Not selected using 'Select' command
Active            Selected using 'Select' command

NOTE 1:Existing ETSI Smartcard Platform specifications allow for multiple applications to exist on a UICC. Available applications are indicated when EFDIR is 'Selected' and 'Read' following the ATR as per TS 102 221 [1]. The capability for multiple applications to be 'Selected' and utilised is achieved though the mechanism of Logical Channels, also defined in TS 102 221 [1].

NOTE 2:For the specific case of an Active NAA Application, the state of the subscription associated with the NAA is active if the MNO's Network Access Credentials e.g. IMSI, K are also active in HLR/AuC.

C Logical aspects of eUICC Architecture and associated Security Credentials

NOTE:Figure C.1 requires updates in order to align with the definitions in the present document.

MNO-OTA                                                                                                                        eUICC
 “03.48”
[...]Profile Content Management       Content
         Access Credentials           Manager
                             Profile x                     Profile y
Profile A
(includes NAA)
   Network Access
Credentials; e.g. IMSI, K
    MNO
Core Network
                                                                         Profile Installer
                                                                        Profile Manager
                                                                        Operating System
eUICC
                                                     [...]SM-SR Access Credentials
Logical Architecture
  and associated                                                SM-SR
Security Credentials                                                             [...]SM-DP Access Credentials
                                                                                     (tunnelled in [...]SM-SR)
                                                                     SM-DP (n)
                                                   SM-DP                                 Notes:
Key:                                                                 as required
                                                                                         1) There may be multiple instances of SM-SR/SM-DP(s)
[...]     indicates a secured channel                                                    2) There may be a need to introduce additional roles
           and end-points                                                                3) SM-SR/Profile Block Manager Commands may be associated with credentials

CCH; 9 November 2011 r2

Figure C.1

D Profiles and NAA (Network Access Application) States

              Select
NAA                             NAA
active
  NAA1                        inactive
                                 NAA1
  active                        inactive

Deselect

Disable        Enable
                                       Profile      Delete
Start                                 disabled                           End
           Load and install

Figure D.1

E Profile Aspects

The following considerations outline the understanding of the Profile during its transfer to the eUICC and how it is expected to work on eUICCs in an interoperable manner.

E.1 Profile Content

Generally, a profile is the representation of parameters and data which, when installed on an eUICC, deliver the functionality and features of a UICC according to TS 102 221 [1] and TS 102 671 [2]. Unless otherwise specified in the eUICC specifications, any element that is optional for the UICC continues to be optional for the eUICC.

A profile is made up from the following main components:

1)One or more sets of parameters for Network Access Applications (NAAs), such as:

-SIM = Parameters and Content of the SIM File System + Keys and Parameters for network access authentication, PINs and PUKs.

-USIM = Parameters and Content of the USIM File System + Keys and Parameters for network access authentication, PINs and PUKs.

-ISIM = Parameters and Content of the ISIM File System + Keys and Parameters for network access authentication, PINs and PUKs.

-CSIM = Parameters and Content of the CSIM File System + Keys and Parameters for network access authentication, PINs and PUKs.

2)Mandatory and optional NAA-Independent Parameters and Data, such as:

-Parameters and content of application independent files.

-Standardised parameters under MNO control.

-Universal PIN and PUK.

-Keysets and Keys.

-SD structure.

-Policy Rules.

3)Optional Java Card™ applets and respective parameters.

4)Optional proprietary elements, e.g. applications, files or parameters that have a meaning only in combination with specific eUICCs.

E.2 Profile Related Principles

The following principles were identified to guarantee a level of interworking between Profiles and eUICCs similar to UICCs and Terminals in the classical UICC environment. This allows Profiles and eUICCs to evolve while backwards compatibility (advanced Profile on old eUICC or old Profile on advanced eUICC) is maintained. At the same time it is possible for Profiles in combination with particular eUICCs (and Terminals) to realize particular proprietary features.

1)A Profile contains at least the mandatory NAA Independent Parameters and the parameter set for an NAA.

NOTE 1:Standardisation bodies in charge of NAAs may mandate a specific NAA for profiles within their context, e.g. 3GPP may require at least a USIM.

2)An eUICC supports at least a Profile containing the mandatory NAA Independent Parameters and the parameter set for an NAA. Other mandatory elements are TBD. Unsupported elements in a Profile are ignored.

NOTE 2:Standardisation bodies in charge of NAAs may mandate specific NAA support for eUICCs within their context, e.g. 3GPP may require to support at least a USIM.

3)Profiles may contain proprietary elements. These are out of scope for ETSI SCP.

4)eUICCs may support proprietary elements in a Profile. This is out of scope for ETSI SCP. Proprietary elements that are not supported are ignored by the eUICC.

F Change history

The table below indicates changes that have been incorporated into the present document since it was created
by TC SCP.
     Meeting      Plenary Tdoc    CR    Rev   Cat                           Subject                               Old     Resulting
                                                                                                                Version    Version
     SCP #58 SCP(13)000049r1       -    -     -     Initial publication                                          2.0.0     12.0.0
     SCP #59 SCP(13)000103        001   -     F     Definition of subscriber                                    12.0.0     12.1.0
             SCP(13)000104        002   -     F     Management of the content of provisioning profiles
             SCP(13)000105        003   -     F     Clarification of "platform-related commands"
             SCP(13)000106        004   -     F     Clarification of "unexpected interruptions"
             SCP(13)000107r1      005   1     F     Removal of redundant requirements
             SCP(13)000108r1      006   1     F     Definitions of container term and container related
                                                    activities
             SCP(13)000109r1      007   1     B     Missing requirement on anti-cloning of profiles
             SCP(13)000110r1      008   1     F     Credentials for container creation
     SCP #60 SCP(13)000174        009   -     F     Two-layer encryption for profile loading and installation   12.1.0     12.2.0
             SCP(13)000178        013   -     B     Requirement on anti-cloning part 2
             SCP(13)000179        014   -     B     Requirement for direct mutual authentication between
                                                    eUICC and Profile Installer Credential holder
               SCP(13)000180      015    -    B     eUICC Information Requirements
               SCP(13)000181      016    -    C     Clarification of profile state transitions
               SCP(13)000182r1    017    -    B     Address resolution of profile management credentials
                                                    holder
     SCP #61 SCP(13)000262r1      018   2     D     Potential Authorized Entities                               12.2.0     12.3.0
             SCP(13)000257        019         F     Correction of MNO management of profile requirement
             SCP(13)000261        020         B     Requirements for authorization and credentials
                                                    establishment
               SCP(13)000260r1    021   1     C     Obtain profile information
               SCP(13)000258      022         C     Deletion only of disabled profiles
               SCP(13)000263      023         D     Addition of Profile Container Initialisation definition
               SCP(13)000259      024         C     State of a successfully installed profile
               SCP(13)000256r1    025   1     B     Clarification about the uniqueness of Profile Installer
                                                    Credentials
     SCP #62 SCP(14)000071        029         B     New requirements for Policy Control and Policy              12.3.0     12.4.0
                                                    Enforcement
               SCP(14)000068      030         B     Enforcement of Policy Rules in disabled Profiles
               SCP(14)000066r1    031   1     B     Procedure to define the entities to receive
                                                    acknowledgement of management operations.
     SCP #63 SCP(14)000125r1      032   1     C     Definition of authorized entity                             12.4.0     12.5.0
             SCP(14)000126        033         D     Section 6.2 Cleanup
             SCP(14)000127r1      034   1     F     Definition of Profile Management Operations and
                                                    cleanup of Procedural section
               SCP(14)000128      035         D     Section 6.1 Cleanup
               SCP(14)000129r1    036   1     C     Section 6.4 Cleanup
               SCP(14)000130r1    037   1     D     Replace Profile Installer by Profile Provisioner
               SCP(14)000131      038         D     Consistent use of term loading and installation
               SCP(14)000132r1    039   1     B     Transport for Profile Management
               SCP(14)000133      040         C     Introduction of eUICC Policy Control Credentials and
                                                    related requirements
             SCP(14)000134        041         C     Security protection of acknowledgements
             SCP(14)000135r1      042   1     B     Visibility of application in a Profile
             SCP(14)000143        043         B     Profile Interoperability
     SCP #64 SCP(14)000184        044         C     eUICC identifier access by the Terminal                     12.4.0     12.5.0
             SCP(14)000185        045         B     Protection of Profile identifier
             SCP(14)000181r1      046   1     B     Change of eUICC Policy Control Credentials
             SCP(14)000183        048         B     Description of Profile
     SCP #65 SCP(14)000251        049               Applicable range of terminals                               12.5.0     12.6.0
             SCP(14)000253        050               Definitions of profile loading and transport
             SCP(14)000258        052               Standardized profile format for loading and installation
             SCP(14)000259r1      053   1           Profile determination by a PMC holder
             SCP(14)000255        054               Security level for profile provisioning
             SCP(14)000254        056               Requirement on atomic operations
             SCP(14)000256        057               Human-readability of eUICC identifier
             SCP(14)000252        058               Preventing deletion of an enabled Profile
 Meeting      Plenary Tdoc   CR    Rev   Cat                           Subject                       Old     Resulting
                                                                                                   Version    Version
 Online SCP(14)000248r1      059               Multiple PMC function split                         12.5.0     12.6.0
  Vote
SCP #66 SCP(14)000339        062         D     Replace SM-DP by Profile Provisioning Credentials   12.6.0     12.7.0
                                               holder in section 6.5
           SCP(14)000340r1   063         F     Correction of a void reference
           SCP(14)000341r1   064   1     B     Terminal state and capabilities reporting through
                                               eUICC
           SCP(14)000342r1   065   1     B     Initiation of Profile Provisioning
History
                                            Document history
V12.0.0      February 2013    Publication
V12.1.0      June 2013        Publication
V12.2.0      September 2013   Publication
V12.3.0      February 2014    Publication
V12.4.0      April 2014       Publication
V12.5.0      August 2014      Publication
V12.6.0      December 2014    Publication
V12.7.0      February 2015    Publication

© European Telecommunications Standards Institute. Converted automatically from the published PDF; layout, figures and tables may differ from the original. The authoritative version is the original: https://www.etsi.org/deliver/etsi_ts/103300_103399/103383/12.07.00_60/ts_103383v120700p.pdf.