Description
V2X sidelink communication is defined as AS functionality enabling V2X Communication as defined in TS 23.285, between nearby UEs, using E-UTRA technology but not traversing any network node. In other words, it is the radio-level (Access Stratum) machinery — channels, procedures, and configurations — that allows two or more UEs, typically vehicles or roadside units, to communicate directly over the PC5 interface. The definition deliberately excludes any network node from the data path: while the network may configure and authorize the sidelink, the actual V2X messages travel directly between UEs.
The functionality spans several layers. At the physical layer, sidelink uses dedicated resource pools in the uplink spectrum (for LTE) or dedicated sidelink bandwidth parts (for NR), with SC-FDMA/DMRS-based transmission and a sidelink control information (SCI) channel that schedules the associated data. At the MAC layer, the sidelink HARQ entity, scheduling assignment, and resource selection procedures govern how a UE picks transmission opportunities. At the RRC layer, the network provisions sidelink configurations — resource pools, destination Layer-2 IDs, Tx profiles, and synchronization references — via SIB messages (e.g., SIB21 in LTE, SIB12 in NR) or dedicated signalling.
Two resource allocation modes exist. In network-scheduled mode (Mode 1 in NR, Mode 3 in LTE), the eNB/gNB grants sidelink resources to the UE through downlink control information, giving the operator tight control over interference. In UE-autonomous mode (Mode 2 in NR, Mode 4 in LTE), the UE selects resources itself from a configured pool using sensing and semi-persistent scheduling, which allows operation out of coverage and reduces signalling latency. Synchronization is obtained either from the network (via a sidelink synchronization signal from an eNB/gNB or a synchronizing UE) or from GNSS, which is common in vehicular scenarios.
The architecture also includes relay and coverage-extension aspects. A UE can act as a relay between a remote UE and the network, and sidelink communication can be combined with Uu communication for V2X services that require both direct and network paths.
V2X sidelink communication is specified across a large set of documents: TS 36.300 and TS 38.300 for overall architecture, TS 36.321/38.321 for MAC, TS 36.331/38.331 for RRC, TS 36.304/38.304 for idle-mode procedures, and TS 37.340 for multi-connectivity. Together these define how a UE discovers, synchronizes, selects resources, and transmits V2X messages directly to its peers.
Purpose & Motivation
V2X sidelink communication exists because many vehicular safety applications cannot tolerate the latency and availability limitations of a network-routed path. A cooperative awareness message warning of a sudden braking event must reach nearby vehicles within milliseconds, even in tunnels, rural areas, or during network outages. Routing such messages through the base station and core network would add latency, consume backhaul, and fail entirely when coverage is absent. Direct sidelink communication solves this by letting vehicles talk to each other peer-to-peer.
The feature also addresses spectrum efficiency and network load. By keeping V2X traffic off the Uu interface, the operator preserves capacity for conventional mobile broadband, while still retaining the ability to schedule sidelink resources when coverage is available. The dual-mode design — network-scheduled when in coverage, UE-autonomous when out of coverage — gives operators control where possible and resilience where necessary.
Historically, LTE V2X sidelink was introduced in Release 14 as an evolution of the earlier D2D (ProSe) sidelink work from Release 12/13, adding vehicular-specific features such as higher speeds, GNSS synchronization, and V2X-specific resource pools. Release 16 brought NR sidelink with unicast and groupcast, and subsequent releases added relay, positioning, and coverage enhancements, reflecting the growing role of sidelink in advanced V2X and public safety use cases.
What changed in its specifications
The latest release-to-release comparison of specifications that define V2X sidelink communication. Each summary describes the whole specification, not only this term.
Rel-19 added NTN IoT Phase 3 for LTE, covering regenerative payload S1 removal, Msg3 early data transmission, and ETWS/CMAS for NB-IoT NTN. It also added inter-RAT mobility from E-UTRAN terrestrial network to NR NTN, plus NR NTN feeder link switchover via handover.
Full comparison in TS 36.300 →Rel-13 added BL/enhanced-coverage exclusions, modulation limits, and new downlink reception types for MTC, plus SC-PTM downlink channel combinations and UE capability requirements.
Full comparison in TS 36.302 →Release Timeline
Detected Changes Across Releases
from 3GPP Change RequestsSpecific changes extracted from the „Change history“ tables of 3GPP specifications (6 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.
- Correction on V2X sidelink communication in TS 36.300 TS 36.300CR1199
- Correction on MCS for V2X sidelink communication in TS 36.302 TS 36.302CR1196
- Correction on V2X sidelink communication in TS 36.321 TS 36.321CR1365
- Clarification to TX Carrier (re)-Selection for V2X Sidelink Communication TS 36.321CR1397
- Addition of the number of SL processes for V2X sidelink communication TS 36.306CR1569
- Correction to the description of UE capability for V2X sidelink communication TS 36.331CR3516
Defining Specifications
3GPP specifications that define or reference V2X sidelink communication, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 36.300 vj20 | E-UTRAN Radio Interface Protocol Architecture | Rel-19 read |
| TS 36.302 vj00 | E-UTRA Physical Layer Services | Rel-19 read |
| TS 36.304 vj30 | LTE UE Idle Mode Procedures | Rel-19 read |
| TS 36.306 vj30 | E-UTRA UE Radio Access Capability Parameters | Rel-19 read |
| TS 36.321 vj30 | E-UTRA MAC Protocol Specification | Rel-19 read |
| TS 36.331 vj40 | E-UTRA Radio Resource Control (RRC) Protocol | Rel-19 read |
| TS 37.340 vj30 | Overview of Multi-Connectivity Operation using E-UTRA and NR | Rel-19 read |
| TS 38.300 vj40 | NR and NG-RAN Overall Description | Rel-19 read |
| TS 38.304 vj30 | NR UE Idle and Inactive State Procedures | Rel-19 read |
| TS 38.321 vj40 | NR MAC Protocol Specification | Rel-19 read |
| TS 38.331 vj40 | NR Radio Resource Control (RRC) | Rel-19 read |