Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

Single direction requirement

Single Direction Requirement (AAS Base Station OTA Requirement)

Radio Access Network →

Single direction requirement is an AAS base station requirement applied in a specific direction within the OTA coverage range for transmission, and for reception when the incident wave angle of arrival falls within applicable OTA REFSENS or minSENS RoAoA.

Introduced
Rel-15
Where
Radio Access Network › Multi-RAT
Specifications
3 specs
Single direction requirement Description Purpose Neighbours Specifications

Description

The Single Direction Requirement is an Active Antenna System (AAS) base station requirement defined in 3GPP specifications TS 37.105 (AAS BS radio transmission and reception), TS 37.843 (AAS BS conformance testing) and TS 38.817 (NR OTA test methodology). It specifies that a given requirement is applied in a specific direction within the OTA coverage range for the transmitter, and, for the receiver, when the angle of arrival (AoA) of the incident wave of a received signal is within the OTA REFSENS RoAoA or the minSENS RoAoA, as appropriate. In simpler terms, it is a requirement that is evaluated direction-by-direction rather than over the whole sphere or a single boresight direction.

This concept is fundamental to testing AAS and massive MIMO base stations, which do not radiate uniformly. An AAS integrates an antenna array with the radio, forming beams whose gain, pattern, and coverage vary with direction. Traditional conducted testing at an antenna connector is not possible because there is no accessible connector — the antenna is part of the radio unit. OTA (over-the-air) testing is therefore mandatory, and requirements must be defined with respect to direction. A single direction requirement states that, for a specified direction within the declared OTA coverage range, the base station must meet a defined performance level (e.g., transmit power, EVM, unwanted emissions, or reference sensitivity).

For the transmitter, the requirement applies within the OTA coverage range — the angular region over which the base station is declared to provide service. For the receiver, the condition is more nuanced: the requirement applies when the AoA of the incident wave lies within the OTA REFSENS RoAoA (the range of angles over which reference sensitivity is declared) or the minSENS RoAoA (the range over which minimum sensitivity is declared), as appropriate to the requirement being assessed. This directional conditioning ensures that receiver requirements are only applied where the base station is actually designed to receive with the declared performance, avoiding unfair or meaningless tests at angles outside the declared receive coverage.

The RoAoA (Range of Angles of Arrival) concept is central: it defines the angular window within which the base station's receive performance is characterised. Different requirements may reference different RoAoA values (REFSENS vs minSENS), reflecting the fact that sensitivity performance degrades as the incident angle moves away from the optimal beam direction. By tying the applicability of a requirement to the AoA relative to these declared ranges, 3GPP creates a testable, reproducible framework that accommodates the beam-based nature of AAS while still holding vendors to meaningful performance obligations.

In practice, conformance testing per TS 37.843 uses OTA test methods (e.g., in a far-field anechoic chamber or compact antenna test range) to position the test antenna at specified angles and measure performance. The single direction requirement tells the test engineer exactly which angles must be tested and under what conditions the pass/fail criteria apply. This makes OTA testing of massive MIMO base stations tractable and comparable across vendors, and it supports the deployment of beamforming networks where directional performance is the primary figure of merit.

Purpose & Motivation

The Single Direction Requirement exists because Active Antenna System base stations broke the traditional conformance testing model. In earlier generations, base stations had accessible antenna connectors, and requirements could be defined at a conducted interface independent of radiation direction. With AAS and massive MIMO, the antenna array is integrated with the radio, beams are formed dynamically, and performance is inherently directional. A requirement defined without reference to direction would be either untestable or meaningless.

By defining requirements as applying in a specific direction within the OTA coverage range (for transmit) and conditioned on the AoA falling within the applicable RoAoA (for receive), 3GPP created a framework that matches the physics of beamforming systems. It allows vendors to declare their coverage ranges and receive angular windows, and it allows test houses to verify performance at the angles that matter, using OTA methods codified in TS 37.843 and TS 38.817.

The concept also solves a fairness problem: without directional conditioning, a base station could be tested at angles far outside its intended coverage and fail requirements it was never designed to meet. The RoAoA-based receive condition ensures that sensitivity requirements apply only where the base station declares receive capability, while still demanding rigorous performance within that window. Introduced in Release 15 alongside the first NR AAS specifications, the concept has proven stable and remains the backbone of OTA conformance for 5G-Advanced massive MIMO base stations.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-15 Initial

Initial definition introduced: an AAS BS requirement applied in a specific direction within the OTA coverage range for Tx, and when the received signal AoA is within the OTA REFSENS RoAoA or minSENS RoAoA for Rx. It established the directional OTA testing framework for NR AAS base stations.

Definition text carried over unchanged from Rel-15; the directional requirement framework continued without modification.

Definition text carried over unchanged; no substantive revision to the concept.

Definition text carried over unchanged through the 5G-Advanced transition.

Definition text is substantively identical to Rel-15; only line-wrapping/formatting of the quoted text differs, with no change in technical meaning.

Defining Specifications

3GPP specifications that define or reference Single direction requirement, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 37.105 vj40 AAS Base Station Radio Requirements Rel-19 read
TR 37.843 vf70 AAS BS Radiated RF Requirement Background Rel-15 read
TS 38.817 3GPP TR 38.817 Rel-15 read