Description
Sidelink communication is the access-stratum (AS) functionality that enables ProSe Direct Communication between two or more nearby UEs using E-UTRA technology, without the traffic passing through any network node. It is the radio-level enabler for device-to-device (D2D) communication over the PC5 interface, as opposed to the conventional Uu interface between UE and eNB. The concept was introduced in Release 12 as part of the ProSe (Proximity Services) work item and has since been extended to support vehicular (V2X) and aerial (A2X) use cases.
At the physical and MAC layers, sidelink communication defines dedicated sidelink channels: the Physical Sidelink Control Channel (PSCCH) carries scheduling information, the Physical Sidelink Shared Channel (PSSCH) carries data, and the Physical Sidelink Broadcast Channel (PSBCH) carries synchronization information. Sidelink synchronization signals (SLSS) allow UEs to synchronize directly with each other when no eNB coverage is available. The MAC layer (TS 36.321) manages sidelink scheduling, buffer status reporting, and logical channel prioritization, while RRC (TS 36.331) configures sidelink resource pools and transmission parameters.
Resource allocation for sidelink communication can operate in two modes. In network-scheduled mode (Mode 1), the eNB grants sidelink resources to the UE via the Uu interface, providing centralized control and interference management. In UE-autonomous mode (Mode 2), the UE selects resources from pre-configured or broadcast resource pools, enabling operation out of coverage. This dual-mode design is fundamental to supporting public-safety scenarios where infrastructure may be unavailable.
The architecture is defined across several specifications: TS 36.300 describes the overall E-UTRAN sidelink architecture and procedures, TS 36.302 covers services provided by the AS, TS 36.304 addresses idle-mode aspects including discovery and resource selection, TS 36.306 defines UE capabilities, TS 36.321 specifies MAC procedures, TS 36.322 covers RLC, and TS 36.331 defines RRC configuration. Higher-layer ProSe procedures are defined in TS 23.303.
A crucial terminological distinction is maintained in the specifications: the term "sidelink communication" without a "V2X" or "A2X" prefix refers specifically to Public Safety (PS) use unless otherwise stated. This reflects the layered evolution of the feature — the base sidelink communication framework serves public-safety ProSe, while V2X and A2X extensions add vehicular and aerial-specific enhancements such as higher speeds, denser topologies, and different QoS models. Sidelink communication is thus the foundation on which LTE V2X (Rel-14 onward) and later NR sidelink (Rel-16 onward) capabilities are built.
Purpose & Motivation
Sidelink communication was created to enable direct device-to-device communication that bypasses the cellular infrastructure entirely. Traditional cellular communication requires all traffic to traverse the eNB and core network, which introduces latency, consumes backhaul and spectrum resources, and fails entirely when network coverage is unavailable. Public-safety organizations — police, fire, and emergency services — required robust communication in exactly those situations where infrastructure is damaged or absent.
The ProSe work item in Release 12 addressed this by defining a radio interface (PC5) over which nearby UEs can communicate directly. This provides resilience (operation without network coverage), reduced latency (no round trip through the network), and improved spectral efficiency (proximity reuse of resources). It also enables new proximity-based services such as discovery of nearby friends or commercial offers.
Subsequent releases extended the concept to vehicular communication (V2X), where low-latency direct links between vehicles support safety applications like cooperative awareness and collision avoidance. The specification's careful distinction between base sidelink communication (public safety) and its V2X/A2X extensions reflects this layered evolution, allowing the core D2D framework to serve multiple application domains.
What changed in its specifications
The latest release-to-release comparison of specifications that define Sidelink communication. Each summary describes the whole specification, not only this term.
Rel-19 added NTN IoT Phase 3 for LTE, covering regenerative payload S1 removal, Msg3 early data transmission, and ETWS/CMAS for NB-IoT NTN. It also added inter-RAT mobility from E-UTRAN terrestrial network to NR NTN, plus NR NTN feeder link switchover via handover.
Full comparison in TS 36.300 →Rel-13 added BL/enhanced-coverage exclusions, modulation limits, and new downlink reception types for MTC, plus SC-PTM downlink channel combinations and UE capability requirements.
Full comparison in TS 36.302 →Release Timeline
Detected Changes Across Releases
from 3GPP Change RequestsSpecific changes extracted from the „Change history“ tables of 3GPP specifications (7 CRs across 2 releases). Complements the general historical overview above with the evidence-based evolution of this function.
- Correction on V2X sidelink communication in TS 36.300 TS 36.300CR1199
- Correction on MCS for V2X sidelink communication in TS 36.302 TS 36.302CR1196
- Correction on V2X sidelink communication in TS 36.321 TS 36.321CR1365
- Clarification to TX Carrier (re)-Selection for V2X Sidelink Communication TS 36.321CR1397
- Addition of the number of SL processes for V2X sidelink communication TS 36.306CR1569
- Correction to the description of UE capability for V2X sidelink communication TS 36.331CR3516
Defining Specifications
3GPP specifications that define or reference Sidelink communication, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 36.300 vj20 | E-UTRAN Radio Interface Protocol Architecture | Rel-19 read |
| TS 36.302 vj00 | E-UTRA Physical Layer Services | Rel-19 read |
| TS 36.304 vj30 | LTE UE Idle Mode Procedures | Rel-19 read |
| TS 36.306 vj30 | E-UTRA UE Radio Access Capability Parameters | Rel-19 read |
| TS 36.321 vj30 | E-UTRA MAC Protocol Specification | Rel-19 read |
| TS 36.322 vj00 | E-UTRA Radio Link Control Protocol Specification | Rel-19 read |
| TS 36.331 vj40 | E-UTRA Radio Resource Control (RRC) Protocol | Rel-19 read |