Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

Secondary serving HS-DSCH cell(s)

Secondary serving High-Speed Downlink Shared Channel cell

Radio Access Network →

Secondary serving HS-DSCH cell(s) Secondary serving HS-DSCH cell(s) secondary serving HS-DSCH cell(s) is an additional UMTS multi-carrier HSDPA cell where the UE monitors HS-SCCH and receives HS-DSCH simultaneously with the primary serving cell, enabling carrier aggregation of up to 8 downlink carriers for higher throughput.

Introduced
Rel-10
Where
Radio Access Network › UTRAN (3G)
Specifications
4 specs
Secondary serving HS-DSCH cell(s) Description Purpose What changed Neighbours Specifications

Description

The Secondary serving HS-DSCH cell is a concept in UMTS/HSPA multi-carrier operation, introduced in 3GPP Release 10 as part of the Multi-Carrier HSDPA (MC-HSDPA) feature. In a conventional HSDPA configuration, a UE is served by a single serving HS-DSCH cell that carries the High-Speed Downlink Shared Channel. With multi-carrier operation, the network can configure additional cells—the secondary serving HS-DSCH cells—where the UE simultaneously monitors an HS-SCCH (High-Speed Shared Control Channel) set and receives the HS-DSCH if scheduled in that cell. This effectively aggregates multiple downlink carriers, multiplying the peak data rate available to the UE.

The mechanism works by extending the UE's monitoring and reception capabilities across multiple cells. Each secondary serving HS-DSCH cell has its own HS-SCCH set that the UE must monitor, and the UE must be capable of receiving HS-DSCH transmissions from multiple cells in parallel. The serving HS-DSCH cell remains the primary cell, and the secondary serving cells are configured in addition to it. The number of secondary serving HS-DSCH cells depends on the UE's capability and the network configuration. In Release 10, up to 3 secondary serving HS-DSCH cells could be configured, supporting a total of 4 downlink carriers. In Release 11, this was extended to up to 7 secondary serving HS-DSCH cells, enabling 8-carrier HSDPA operation.

The concept is closely tied to the uplink frequency configuration. When a UE is configured with two uplink frequencies, the first secondary serving HS-DSCH cell is specifically defined as the secondary serving HS-DSCH cell associated with the secondary uplink frequency. This association ensures that the downlink and uplink carrier pairing is correctly maintained for UEs supporting dual-cell HSUPA or dual-carrier uplink operation. The specifications in TS 25.101 (UE radio transmission and reception), TS 25.104 (BS radio transmission and reception), TS 25.141 (BS conformance testing), and TS 25.331 (RRC protocol) define the requirements, signaling, and configuration procedures for secondary serving HS-DSCH cells.

From a radio resource management perspective, secondary serving HS-DSCH cells allow the network to schedule data across multiple carriers, improving spectral efficiency and user throughput. The scheduler in the NodeB can distribute traffic across the aggregated carriers based on channel conditions, load, and QoS requirements. The UE reports channel quality information (CQI) for each configured cell, enabling the scheduler to make informed decisions. The HS-SCCH monitoring requirement means the UE must process control channels for each cell, which increases UE complexity and power consumption but enables the higher throughput.

The secondary serving HS-DSCH cell concept was a key step in the evolution of HSPA toward higher data rates, culminating in 8-carrier HSDPA in Release 11 and beyond. While 5G NR has largely superseded HSPA in terms of peak throughput, the multi-carrier aggregation principles developed for HSDPA—including the coordination of control channels across carriers and the association between downlink and uplink carriers—informed the design of later carrier aggregation features in LTE and NR.

Purpose & Motivation

The Secondary serving HS-DSCH cell was created to overcome the throughput limitations of single-carrier HSDPA. In the late 2000s, mobile data demand was growing rapidly, and operators needed ways to increase peak data rates without acquiring new spectrum. Multi-carrier HSDPA allowed operators to aggregate multiple existing carriers, effectively multiplying the bandwidth available to each user without requiring contiguous spectrum or a new radio access technology.

Before Release 10, a UE could only receive HS-DSCH from a single serving cell at a time. The secondary serving HS-DSCH cell concept provided this framework by defining how additional cells are configured, how the UE monitors their control channels, and how the network schedules data across them.

The extension from 3 to 7 secondary serving cells in Release 11 further increased the aggregation capability to 8 carriers, pushing peak HSDPA rates into the hundreds of Mbps. This was particularly valuable for operators with fragmented spectrum holdings, as it allowed them to combine non-contiguous carriers into a single high-throughput connection. The concept also introduced important design patterns—such as the association between downlink secondary cells and uplink frequencies—that were carried forward into LTE and NR carrier aggregation.

What changed in its specifications

The latest release-to-release comparison of specifications that define Secondary serving HS-DSCH cell(s). Each summary describes the whole specification, not only this term.

TS 25.101Rel-18 → Rel-19

Rel-19 brings only minor changes to TS 25.101: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TS 25.101 →
TS 25.104Rel-18 → Rel-19

Rel-19 brings only minor changes to TS 25.104: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TS 25.104 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-10 Initial

Multi-carrier HSDPA was introduced with up to 3 secondary serving HS-DSCH cells (4 carriers total). The definition established the UE requirement to monitor HS-SCCH sets and receive HS-DSCH across multiple cells, and defined the association of the first secondary serving cell with the secondary uplink frequency.

The maximum number of secondary serving HS-DSCH cells was increased from 3 to 7, enabling 8-carrier HSDPA operation. The definition text was revised to reflect this extended capability while retaining the uplink frequency association rule.

The definition carried over unchanged from Rel-11. The 8-carrier capability and uplink association rules remained in effect without textual revision.

The definition remained unchanged. Multi-carrier HSDPA continued to be maintained with the same maximum carrier configuration.

The definition carried over unchanged. No revision to the secondary serving HS-DSCH cell definition was made in this release.

The definition remained unchanged. The term continued to be maintained in the HSPA specifications alongside ongoing 5G development.

The definition carried over unchanged. HSPA maintenance continued without altering the multi-carrier cell definition.

The definition remained unchanged. The secondary serving HS-DSCH cell concept was preserved as-is in the maintained specifications.

The definition carried over unchanged. No textual revision was made to the term.

The definition remained unchanged. The term continues to be part of the maintained HSPA vocabulary.

Defining Specifications

3GPP specifications that define or reference Secondary serving HS-DSCH cell(s), with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 25.101 vj00 UTRA FDD UE RF Requirements Rel-19 read
TS 25.104 vj00 UTRA FDD Base Station RF Characteristics Rel-19 read
TS 25.141 vj00 UTRA FDD Base Station RF Conformance Testing Rel-19 read
TS 25.331 vj01 UTRAN Radio Resource Control Protocol Rel-19 read