Description
NR sidelink discovery is the Access Stratum (AS) functionality that allows two or more nearby User Equipments (UEs) to discover each other using New Radio (NR) technology over the PC5 interface, without any of the discovery traffic traversing a network node such as a gNB or core network function. It is defined in the RAN specifications (notably TS 38.300, 38.304, 38.321, 38.322, 38.323, 38.331, and 37.340) and complements the higher-layer Proximity Services (ProSe) discovery procedures specified by SA2 in TS 23.304. Discovery is a prerequisite for subsequent sidelink communication: before UEs can exchange user data directly, they must first find each other and, in relay scenarios, identify suitable relay candidates.
The feature operates on the NR sidelink, which uses dedicated physical channels — the Physical Sidelink Discovery Channel (PSDCH) and, in later releases, the Physical Sidelink Feedback Channel (PSFCH) and Physical Sidelink Shared/Control Channels (PSSCH/PSCCH) — configured via System Information Blocks (SIB12 and its extensions) or dedicated RRC signalling. UEs can perform discovery in different resource allocation modes: Mode 1, where the gNB schedules discovery resources, and Mode 2, where the UE autonomously selects resources from a configured pool using sensing and reservation mechanisms. Discovery messages are carried in PC5-RRC and PC5-S signalling, with the MAC layer (TS 38.321) handling logical channel prioritisation and the RLC/PDCP layers (TS 38.322/38.323) providing reliable delivery and ciphering where required.
Architecturally, discovery is controlled by RRC (TS 38.331), which configures the discovery resource pools, the applicable radio parameters (e.g., frequency, bandwidth part, synchronization references), and the UE behaviour in RRC_IDLE, RRC_INACTIVE, and RRC_CONNECTED states. TS 38.304 defines the cell selection and reselection aspects relevant to UEs performing discovery, including how a UE in coverage can use a serving cell's configuration and how out-of-coverage UEs rely on pre-configuration. TS 37.340 covers the multi-connectivity and relay aspects, including how a remote UE discovers and selects a UE-to-Network relay under NG-RAN.
Over successive releases the scope of discovery has expanded significantly. Rel-17 introduced the basic AS functionality for ProSe non-Relay discovery and ProSe UE-to-Network Relay discovery. Rel-18 extended this to ProSe UE-to-UE Relay discovery, enabling a relay UE to forward traffic between two remote UEs that are not directly reachable. Rel-19 further added ProSe Multihop L2 UE-to-Network Relay discovery, where a remote UE can reach the network through a chain of relay UEs, requiring discovery procedures that account for multi-hop paths and relay selection across hops.
Discovery is fundamental to the sidelink ecosystem because it enables proximity-based services — public safety communication, commercial proximity services, vehicle-to-everything (V2X) scenarios, and coverage extension via relays — without requiring network involvement in the direct link. It allows devices to find peers, services, and relays autonomously, which is essential for out-of-coverage operation, disaster response, and low-latency local communication.
Purpose & Motivation
NR sidelink discovery exists to let UEs find each other and discover available services or relays directly over the radio interface, without routing discovery signalling through the network. This is essential for public safety users operating out of coverage, for commercial proximity services where devices need to detect nearby peers, and for relay-based coverage extension where a remote UE must identify a suitable relay UE before establishing a sidelink connection. By keeping discovery local, it reduces latency, conserves network resources, and enables operation when network coverage is unavailable.
Those mechanisms were tied to LTE radio characteristics and had limited support for relay and multi-hop topologies. As NR sidelink matured — with flexible numerologies, beam-based operation, and enhanced resource allocation — a native NR discovery capability became necessary to support the broader ProSe framework defined in TS 23.304, including UE-to-Network and UE-to-UE relaying.
The Rel-17 introduction of NR sidelink discovery addressed the gap for NR-based ProSe, and subsequent releases progressively extended it to relay topologies (UE-to-UE relay in Rel-18, multihop L2 UE-to-Network relay in Rel-19). This evolution reflects the growing role of sidelink as a general-purpose direct communication enabler for coverage extension, mesh-like connectivity, and advanced V2X and industrial use cases.
What changed in its specifications
The latest release-to-release comparison of specifications that define NR sidelink discovery. Each summary describes the whole specification, not only this term.
Rel-19 adds to TS 37.340 data collection for SON/MDT in NR standalone and MR-DC Phase 4. It covers conditional PSCell addition or change (CPAC/S-CPAC) failure detection and root cause analysis in MN and SN nodes.
Full comparison in TS 37.340 →Rel-19 adds multi-hop L2 UE-to-Network relay for NR sidelink as the largest item. It also adds low-power wake-up signal and receiver (LP-WUS/WUR) text, on-demand SSB and SIB1 for network energy savings, and sub-band full duplex for TDD carriers.
Full comparison in TS 38.300 →Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Initial definition: AS functionality enabling ProSe non-Relay discovery and ProSe UE-to-Network Relay discovery for Proximity based Services as defined in TS 23.304, between two or more nearby UEs, using NR technology but not traversing any network node.
Defining Specifications
3GPP specifications that define or reference NR sidelink discovery, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 37.340 vj30 | Overview of Multi-Connectivity Operation using E-UTRA and NR | Rel-19 read |
| TS 38.300 vj40 | NR and NG-RAN Overall Description | Rel-19 read |
| TS 38.304 vj30 | NR UE Idle and Inactive State Procedures | Rel-19 read |
| TS 38.321 vj40 | NR MAC Protocol Specification | Rel-19 read |
| TS 38.322 vj30 | NR Radio Link Control (RLC) Protocol Specification | Rel-19 read |
| TS 38.323 vj10 | PDCP Protocol Specification | Rel-19 read |
| TS 38.331 vj40 | NR Radio Resource Control (RRC) | Rel-19 read |