Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

NCR-Fwd

Network-Controlled Repeater Forwarding entity

Radio Access Network →

NCR-Fwd is the amplify-and-forward function of a Network-Controlled Repeater that relays uplink and downlink radio signals between a base station and a user equipment, governed by control information from the base station.

Introduced
Rel-18
Where
Radio Access Network › NG-RAN (5G)
Specifications
3 specs
NCR-Fwd Description Purpose What changed Neighbours Detected Changes Specifications

Description

The NCR-Fwd (Network-Controlled Repeater Forwarding entity) is a functional entity introduced in 3GPP Release 18 as part of the Network-Controlled Repeater (NCR) framework. It performs amplify-and-forward relaying of uplink and downlink RF signals between a gNB and a UE, operating over two radio links: a backhaul link toward the controlling gNB and an access link toward the served UE. Unlike a conventional analog repeater, the NCR-Fwd does not operate autonomously; its forwarding behavior is controlled by side control information that it receives from the gNB, typically via the NCR-MT (Mobile Termination) component of the NCR node.

Architecturally, the NCR-Fwd is one of the two functional components of an NCR-node, the other being the NCR-MT. The NCR-MT maintains a control-plane connection to the gNB and receives side control information, which is then used to configure the NCR-Fwd. This separation allows the repeater to be treated as a manageable network element rather than an uncontrolled RF amplifier. The side control information may include parameters such as on/off state, transmit power, beam direction, and timing alignment, enabling the gNB to coordinate the repeater's operation with the surrounding radio access network.

The NCR-Fwd operates at the RF level, amplifying and forwarding the received signal without full baseband demodulation and decoding. This makes it a low-complexity, low-cost, and low-latency solution for extending coverage, particularly in scenarios such as millimeter-wave deployments where propagation loss and blockage are significant. Because the forwarding is controlled, the NCR-Fwd can mitigate interference that would otherwise be caused by an uncontrolled repeater, and it can be integrated into network planning and mobility procedures.

The behavior of the NCR-Fwd is specified across several 3GPP documents. TS 38.300 describes the overall NR and NG-RAN architecture and the role of the NCR within it. TS 38.321 defines the MAC layer procedures relevant to the NCR-MT and the reception of side control information. TS 38.114 provides the detailed RF and performance requirements for Network-Controlled Repeaters, including the forwarding characteristics of the NCR-Fwd. Together these specifications define how the NCR-Fwd is controlled, how it forwards signals, and what performance it must achieve.

In the overall network, the NCR-Fwd acts as a coverage extension tool that sits between the gNB and the UE without being a full base station. It does not terminate RRC, PDCP, or other protocol layers for the UE; instead it transparently relays the RF signal. This distinguishes it from integrated access and backhaul (IAB) nodes, which are full gNB-DUs with their own protocol stacks. The NCR-Fwd's controlled amplify-and-forward nature makes it a complementary tool for operators seeking to fill coverage holes, extend cell edge, and improve throughput in a cost-effective manner.

Purpose & Motivation

The NCR-Fwd exists to provide a controlled, low-cost means of extending NR coverage without the complexity and expense of deploying additional full base stations. Traditional analog repeaters amplify and forward signals blindly, which can create interference, amplify noise, and destabilize network performance. By making the forwarding behavior controllable via side control information from the gNB, the NCR-Fwd allows operators to reap the coverage benefits of repeaters while retaining network control over interference and resource usage.

The motivation for introducing the NCR framework in Release 18 was driven by the need for economical coverage extension, especially at higher frequency bands such as FR2 where path loss and blockage are severe. Deploying full gNBs or IAB nodes in every coverage hole is costly in terms of backhaul, power, and site acquisition. The NCR-Fwd offers a middle ground: an RF-level relay that requires no wired backhaul and can be coordinated by the network. This addresses the limitations of earlier uncontrolled repeater deployments, which were difficult to manage and often caused more harm than good in dense networks.

By defining the NCR-Fwd as a distinct functional entity with specified control interfaces and performance requirements, 3GPP enables multi-vendor interoperability and standardized network management of repeaters. This supports operators in planning, deploying, and operating repeaters as part of the RAN, integrating them into mobility, interference coordination, and energy-saving strategies.

What changed in its specifications

The latest release-to-release comparison of specifications that define NCR-Fwd. Each summary describes the whole specification, not only this term.

TS 38.300Rel-18 → Rel-19

Rel-19 adds multi-hop L2 UE-to-Network relay for NR sidelink as the largest item. It also adds low-power wake-up signal and receiver (LP-WUS/WUR) text, on-demand SSB and SIB1 for network energy savings, and sub-band full duplex for TDD carriers.

Full comparison in TS 38.300 →
TS 38.321Rel-18 → Rel-19

Rel-19 adds sub-band full duplex handling to the NR Random Access procedure. It covers new second-PRACH-occasion RO type selection, power settings, Msg1 repetition, and RSRP threshold settings.

Full comparison in TS 38.321 →

Release Timeline

Detected Changes Across Releases

from 3GPP Change Requests

Specific changes extracted from the „Change history“ tables of 3GPP specifications (1 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.

Rel-18 1 change
  • Correction on NCR-Fwd functionality TS 38.300CR0994

Defining Specifications

3GPP specifications that define or reference NCR-Fwd, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 38.114 vj00 EMC Requirements for NR Repeaters and NCR Rel-19 read
TS 38.300 vj40 NR and NG-RAN Overall Description Rel-19 read
TS 38.321 vj40 NR MAC Protocol Specification Rel-19 read