Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

multi-band connector

Multi-band antenna connector (BS type 1-C) / TAB connector (BS type 1-H)

Radio Access Network →

multi-band connector is an antenna or TAB connector of a base station that simultaneously processes two or more carriers in common active RF components, with at least one carrier in a different, non-overlapping operating band.

Introduced
Rel-15
Where
Radio Access Network › NG-RAN (5G)
Specifications
8 specs
multi-band connector Description Purpose What changed Neighbours Detected Changes Specifications

Description

A multi-band connector is a physical RF reference point defined in 3GPP base station conformance specifications. For BS type 1-C (conducted testing architecture), it is the antenna connector; for BS type 1-H (hybrid architecture), it is the TAB connector. The connector is associated with a transmitter or receiver chain that is characterized by the ability to process two or more carriers in common active RF components simultaneously. Crucially, at least one of these carriers must be configured in a different operating band than the others, and that different operating band must not be a sub-band or a superseding-band of another supported operating band. This last condition prevents a carrier pair within the same band family (for example, a band and one of its sub-bands) from being counted as a genuine multi-band configuration.

The concept matters because modern base stations increasingly share active RF hardware — power amplifiers, filters, transceivers — across multiple frequency bands to reduce cost, size, and power consumption. When carriers from different bands pass through common active components, the transmitter and receiver characteristics (such as unwanted emissions, spurious emissions, blocking, and intermodulation) can no longer be assessed band-by-band in isolation. The multi-band connector provides the standardized reference point at which these combined multi-band characteristics are declared and tested. Declarations in the base station capability information (per 38.104 and 38.141) state which bands are supported at each connector and which multi-band combinations are operational.

In the conformance framework, the multi-band connector interacts with several other defined reference points and concepts. For BS type 1-C, the antenna connector is the conducted test point; for BS type 1-H, the TAB connector is the point where radiated and conducted requirements meet through the transceiver array boundary. The multi-band connector definition is used in requirements for multi-band operation, including multi-band unwanted emissions, multi-band blocking, and multi-band intermodulation. Test specifications such as 37.141 (multi-standard radio base station conformance testing) and 38.141 (NR base station conformance testing) reference this definition when defining test configurations that exercise carriers across bands simultaneously.

Operationally, a base station may declare multiple multi-band connectors, each supporting a specific set of bands and carriers. The declaration includes the operating bands, the supported carrier configurations, and the associated multi-band operational combinations. Network planning and RF exposure assessment (38.817) also rely on this definition, because the combined power and emissions from co-located multi-band carriers must be evaluated at the connector level. The definition's exclusion of sub-band and superseding-band relationships ensures that the declared multi-band capability reflects genuinely distinct spectrum, avoiding ambiguity in how requirements apply.

The term was introduced in Release 15 alongside the first NR base station RF specifications and has remained stable through Release 20. Its persistence reflects the maturity of the multi-band base station architecture and the need for a stable, unambiguous reference point for conformance testing across conducted, hybrid, and radiated base station types.

Purpose & Motivation

The multi-band connector exists to give a precise, testable reference point for base stations that share active RF components across multiple operating bands. Without such a definition, conformance requirements for transmitters and receivers would be ambiguous when carriers from different bands pass through the same power amplifier or receiver chain, because emissions and intermodulation products from one band can fall into another band's spectrum. The definition solves this by requiring that at least one carrier be in a genuinely different operating band — not a sub-band or superseding-band — so that multi-band requirements apply only to real cross-band configurations.

Historically, early base station specifications treated each supported band independently, with separate antenna connectors and separate test configurations. As multi-band and multi-standard radio (MSR) products emerged, operators and vendors needed a way to declare and verify combined operation. The multi-band connector concept, formalized in Release 15, provided that common vocabulary and has been carried forward unchanged, supporting the evolution toward hybrid and radiated base station architectures where the TAB connector plays the equivalent role.

What changed in its specifications

The latest release-to-release comparison of specifications that define multi-band connector. Each summary describes the whole specification, not only this term.

TS 37.141Rel-11 → Rel-12

L-band Supplemental Downlink test requirements, WCS Band 30 operating and spurious emission requirements, TDD-FDD joint operation ACLR limits, and LTE 450 MHz blocking test tables.

Full comparison in TS 37.141 →
TS 38.104Rel-18 → Rel-19

Rel-19 adds sub-band full duplex base station requirements to TS 38.104, plus LP-WUS text, ATG PUSCH requirements, and the new n110 band. It also adds sub-5 MHz FR1 channel bandwidth requirements and extends wide-area BS unwanted emission limits to n68, n87, n88 and n110.

Full comparison in TS 38.104 →

Release Timeline

Detected Changes Across Releases

from 3GPP Change Requests

Specific changes extracted from the „Change history“ tables of 3GPP specifications (1 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.

Rel-19 1 change
  • (TEI17) Correction of Operating band unwanted emissions for multi-band connector TS 38.104CR0748

Defining Specifications

3GPP specifications that define or reference multi-band connector, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 37.141 vj40 RF Test Methods and Conformance for Multi-Standard Radio Base Stations Rel-19 read
TS 38.104 vk10 NR Base Station RF Requirements Rel-20 read
TS 38.106 vk00 NR Repeaters: RF Requirements (TS 38.106) Rel-20 read
TS 38.115 vj20 Repeater Conformance Testing - Part 2: Radiated Rel-19 read
TS 38.141 vj40 BS Conformance Testing (TR 38.141) Rel-19 read
TS 38.174 vk00 NR Integrated Access and Backhaul Requirements Rel-20 read
TS 38.176 vj40 IAB Conformance Testing Rel-19 read
TS 38.817 3GPP TR 38.817 Rel-15 read