Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

Intra-band contiguous dual connectivity

Intra-band contiguous dual connectivity

Radio Access Network →

Intra-band contiguous dual connectivity is a dual connectivity configuration in which contiguous carriers used by the master and secondary nodes are aggregated within the same operating band, simplifying RF implementation and improving spectral efficiency.

Introduced
Rel-17
Where
Radio Access Network › Multi-RAT
Specifications
3 specs
Intra-band contiguous dual connectivity Description Purpose Neighbours Specifications

Description

Intra-band contiguous dual connectivity is a Dual Connectivity (DC) configuration in which the component carriers used by the two cell groups—the Master Node (MN) and the Secondary Node (SN)—are contiguous and located within the same operating band. In dual connectivity, a UE maintains simultaneous connections to two radio nodes (for example, a master gNB and a secondary gNB, or an eNB and a gNB in EN-DC), each serving one or more component carriers. The band and carrier arrangement determines the RF complexity and the achievable throughput.

In the intra-band contiguous case, the carriers assigned to the MN and SN are adjacent in frequency within a single band. This is the simplest RF scenario for dual connectivity because the UE can potentially use a single wideband transceiver chain covering the contiguous carriers, rather than separate chains for widely separated bands. It contrasts with intra-band non-contiguous DC (carriers in the same band but separated) and inter-band DC (carriers in different bands), both of which impose more demanding RF requirements on the UE.

The 3GPP specifications 37.717, 37.718, and 37.719 define the RF and performance requirements for these DC band combinations. TS 37.717 covers the UE RF requirements for intra-band contiguous DC, TS 37.718 covers the corresponding BS RF requirements, and TS 37.719 covers the performance requirements. These specifications ensure that UEs and base stations from different vendors can interoperate for a given band combination and that the aggregated contiguous carriers meet the necessary emission, sensitivity, and blocking requirements.

Key components include the UE's RF front end capable of receiving/transmitting the contiguous carriers, the MN and SN schedulers that coordinate resource allocation across the two cell groups, and the PDCP layer that splits and reorders traffic across the two legs. Because the carriers are contiguous, the UE may benefit from a single local oscillator and shared filtering, reducing cost and power consumption compared to inter-band DC. However, the proximity of the carriers also creates adjacent-channel and inter-modulation considerations that the RF specifications must address.

Intra-band contiguous DC is important because it offers a practical path to higher throughput without the RF complexity of inter-band aggregation. It is particularly relevant for operators who hold contiguous spectrum in a single band and want to use dual connectivity to boost user data rates. The concept was introduced in Rel-17 and carried forward through Rel-18 and Rel-19, with the definition remaining unchanged across those releases.

Purpose & Motivation

Intra-band contiguous dual connectivity exists to provide a dual connectivity option that maximizes throughput while minimizing UE RF complexity. Dual connectivity was originally introduced to allow a UE to aggregate radio resources from two different nodes, improving throughput and mobility robustness. However, inter-band DC requires the UE to support multiple separate RF chains tuned to different bands, which increases cost, size, and power consumption. Intra-band contiguous DC offers a middle ground: the two carriers are close enough in frequency that the UE can share RF components, yet dual connectivity still provides the scheduling flexibility and throughput benefits of two cell groups.

The concept became relevant as operators with contiguous spectrum holdings sought ways to use dual connectivity without requiring UEs to support complex inter-band combinations. By defining standardized RF requirements for intra-band contiguous DC band combinations in Rel-17 (TS 37.717, 37.718, 37.719), 3GPP enabled a broad ecosystem of UEs and base stations to support this configuration with predictable performance.

The approach also simplifies network deployment: an operator can configure MN and SN carriers within the same band, potentially on the same or adjacent sites, reducing coordination complexity. The definition remained stable through Rel-18 and Rel-19, indicating that the fundamental concept was mature and the subsequent work focused on adding new band combinations and refining requirements rather than changing the definition.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-17 Initial

Initial introduction of intra-band contiguous dual connectivity, with RF and performance requirements defined in TS 37.717, 37.718, and 37.719 for contiguous carriers aggregated in the same operating band.

The definition carried over unchanged; the term continued to describe contiguous carriers of dual connectivity aggregated in the same operating band, with work likely focused on additional band combinations and requirement refinements.

The definition carried over unchanged; the term remained as contiguous carriers of dual connectivity aggregated in the same operating band, with continued specification maintenance.

Defining Specifications

3GPP specifications that define or reference Intra-band contiguous dual connectivity, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 37.717 3GPP TR 37.717 Rel-17 read
TS 37.718 3GPP TR 37.718 Rel-17 read
TS 37.719 vj00 Rel-19 Dual Connectivity Band Combinations Rel-19 read