Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Mobility

Inter-frequency cell

Inter-frequency Cell

Mobility →

Inter-frequency cell is a cell whose primary or measured frequency differs from the user equipment's current operating frequency, enabling inter-frequency measurements, reselection, and handover.

Introduced
Rel-7
Where
Radio Access Network › UTRAN (3G)
Specifications
2 specs
Inter-frequency cell Description Purpose Neighbours Specifications

Description

An inter-frequency cell is a cell whose frequency differs from the frequency the UE is currently using. In UTRAN, the precise definition depends on the UE's RRC state. In idle mode and in the CELL-FACH, CELL-PCH and URA-PCH states, an inter-frequency cell is one whose primary frequency differs from the user's current frequency. In CELL-DCH, where dedicated channels are active, the definition is based on the frequency to be measured: a cell is inter-frequency if its measured frequency differs from the operating frequency for single-carrier operation, or from the associated DPCH operating frequency for multi-carrier operation when a DPCH is configured, or from the associated E-RUCCH operating frequency for multi-carrier operation when no DPCH is configured.

The concept matters because a UE must know which cells are on its own frequency and which are not in order to decide how to measure, reselect and report. Intra-frequency cells can typically be measured without retuning the receiver, whereas inter-frequency cells require the UE to retune to another frequency, which may need measurement gaps and affects power consumption and scheduling. The network configures measurement occasions and compressed mode patterns so that the UE can perform these measurements without losing data on the serving frequency.

Inter-frequency cells are used in several procedures. In idle mode, the UE evaluates inter-frequency neighbours for cell reselection according to ranking criteria that include frequency-specific offsets and priorities. In connected mode, the RNC configures measurement reports on inter-frequency cells to support handover decisions, load balancing and coverage-based mobility. The network can also use inter-frequency cells for traffic steering, for example to move UEs from a congested carrier to a less loaded one.

The definition's state dependence reflects the different ways UTRAN manages radio resources. In common-channel states the UE's reference is simply its current primary frequency, because there is no dedicated multi-carrier configuration. In CELL-DCH, multi-carrier HSDPA and HSUPA introduce additional frequencies, so the standard must specify which frequency serves as the reference for measurement — the DPCH frequency when present, otherwise the E-RUCCH frequency. This ensures that measurement and reporting behaviour is unambiguous in multi-carrier deployments.

Inter-frequency cells are distinct from inter-RAT cells, which belong to another radio access technology, and from intra-frequency cells, which share the serving frequency. Together these categories form the basis of the measurement model in UTRAN and are reflected in the measurement control and reporting procedures of 25.331 and the RF performance requirements of 25.123 and 34.122.

Purpose & Motivation

The inter-frequency cell concept exists to give UEs and networks a precise, state-dependent way to classify cells by frequency so that measurement, reselection and handover procedures behave consistently. Without a clear definition, a UE in a multi-carrier configuration could not know whether a neighbour should be measured with or without retuning, or which frequency to use as the reference for reporting. This matters because inter-frequency measurements are expensive — they require retuning, may need compressed mode, and consume battery — so the network must schedule them carefully.

The definition evolved from a simple primary-frequency comparison in early releases to a more elaborate rule in CELL-DCH once multi-carrier HSDPA and HSUPA were introduced. In Rel-10 the text was extended to specify the DPCH and E-RUCCH reference frequencies for multi-carrier operation, reflecting the need to disambiguate measurement behaviour when a UE operates on more than one carrier. The concept remains foundational for mobility and load balancing in UTRAN networks.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-7 Initial

Initial definition: in idle, CELL-FACH, CELL-PCH and URA-PCH states an inter-frequency cell is one whose primary frequency differs from the user's current frequency; in CELL-DCH it is based on the measured frequency versus the single-carrier operating frequency or the associated DPCH operating frequency for multi-carrier operation.

Definition carried over unchanged.

Definition carried over unchanged.

Wording extended in CELL-DCH to add the case where no DPCH is configured: the reference becomes the associated E-RUCCH operating frequency for multi-carrier operation, disambiguating measurement behaviour in multi-carrier HSUPA deployments.

Definition carried over unchanged from Rel-10.

Definition carried over unchanged.

Definition carried over unchanged.

Definition carried over unchanged.

Definition carried over unchanged.

Definition carried over unchanged.

Definition carried over unchanged; only formatting of the text was normalised.

Definition carried over unchanged.

Definition carried over unchanged.

Defining Specifications

3GPP specifications that define or reference Inter-frequency cell, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 25.123 vj00 Radio Resource Management for TDD Rel-19 read
TS 34.122 vbd0 UTRA TDD UE Conformance Testing Rel-11 read