Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

Inter-band dual connectivity

Inter-band Dual Connectivity

Radio Access Network →

Inter-band dual connectivity is a dual connectivity where component carriers are located in different operating bands, allowing a UE to aggregate spectrum across widely separated frequency bands, improving throughput, coverage and reliability.

Introduced
Rel-17
Where
Radio Access Network › Multi-RAT
Specifications
3 specs
Inter-band dual connectivity Description Purpose Neighbours Specifications

Description

Inter-band dual connectivity (DC) is a multi-connectivity technique in which a user equipment (UE) maintains simultaneous connections to two or more serving nodes (or cell groups) whose component carriers reside in different operating bands. Unlike intra-band DC, where the aggregated carriers share the same band and therefore similar propagation characteristics, inter-band DC combines spectrum with markedly different physical properties — for example a low-band carrier for coverage and a mid- or high-band carrier for capacity. This makes it a powerful tool for balancing coverage and throughput in real deployments.

Architecturally, inter-band DC follows the general dual connectivity framework: a Master Node (MN) anchors the control plane and provides the primary cell group, while a Secondary Node (SN) provides additional user-plane capacity through a secondary cell group. In the NR context, the MN and SN may be an ng-eNB and a gNB (EN-DC), two gNBs (NR-DC), or other combinations depending on the release and deployment. The UE aggregates the carriers at the physical layer and the network coordinates scheduling across the two nodes over the Xn interface. Because the carriers are in different bands, the UE requires separate RF chains and antenna paths per band, which has implications for hardware complexity, power consumption and inter-modem interference.

From the physical layer perspective, inter-band DC introduces specific challenges that the 3GPP RF specifications (notably 37.717, 37.718 and 37.719) address: inter-band carrier aggregation and DC band combinations, coexistence requirements, spurious emission limits, and the need to define supported band combinations and their associated gaps. The UE must handle the fact that the two carriers can have very different path losses, which affects power control, uplink timing and measurement reporting. The network can exploit this asymmetry by steering traffic to the most appropriate carrier.

Inter-band DC is closely related to inter-band carrier aggregation but differs in that the carriers are scheduled by different nodes rather than a single scheduler. This split means that radio resource management, bearer splitting and flow control must be coordinated across nodes, typically via the PDCP layer with split bearers. The SN can be added or released dynamically based on traffic and radio conditions, giving the network flexibility to use inter-band spectrum only when beneficial.

In Rel-17 the concept was formally captured for the supported band combinations in the RF specifications, and it has been carried forward through Rel-18 and Rel-19 as new band combinations and deployment scenarios were added. It plays a key role in operator strategies that combine low-band coverage with mid-band capacity, and in EN-DC deployments where LTE anchors in one band and NR provides capacity in another.

Purpose & Motivation

Inter-band dual connectivity exists to let operators combine spectrum from different frequency bands into a single user connection, something a single carrier or intra-band aggregation cannot do. Low bands provide wide coverage but limited bandwidth, while mid and high bands provide capacity but shorter range; inter-band DC lets a UE benefit from both simultaneously. This addresses the limitation of single-band operation, where a UE must choose between coverage and throughput, and of intra-band aggregation, which is constrained by the amount of contiguous or closely spaced spectrum an operator holds in one band.

Historically, early carrier aggregation focused on intra-band contiguous and non-contiguous scenarios because they were simpler to implement in RF front-ends. As operators acquired fragmented spectrum across bands, and as 5G NR introduced wider bandwidths in higher bands, the need to aggregate across bands grew. Inter-band DC extends the dual connectivity framework, originally defined for LTE, to these cross-band scenarios, enabling load balancing, coverage extension and reliability improvements. It also supports EN-DC and NR-DC architectures where the anchor and capacity layers naturally sit in different bands.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-17 Initial

Initial formal definition: dual connectivity of component carriers in different operating bands, with associated RF band combinations and coexistence requirements captured in 37.717, 37.718 and 37.719.

Definition carried over unchanged; the release added further band combinations and deployment scenarios rather than altering the core concept.

Definition carried over unchanged; continued expansion of supported band combinations and RF requirements.

Defining Specifications

3GPP specifications that define or reference Inter-band dual connectivity, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 37.717 3GPP TR 37.717 Rel-17 read
TS 37.718 3GPP TR 37.718 Rel-17 read
TS 37.719 vj00 Rel-19 Dual Connectivity Band Combinations Rel-19 read