Description
The Inactive Transport Channel is a term defined in 3GPP specifications 44.118 and 45.902, primarily related to GERAN (GSM/EDGE Radio Access Network) and its evolution. It describes a transport channel that, during a specific Transmission Time Interval (TTI), does not carry a transport block, meaning the transport block size is zero. In other words, the channel is not actively transmitting user data or signaling during that TTI. This definition is crucial for understanding the behavior of transport channels in the radio interface protocol architecture, particularly in the context of multiplexing and channel mapping.
In the 3GPP protocol stack, transport channels are offered by the physical layer to the MAC layer. They define how data is transmitted over the radio interface, including characteristics such as coding, interleaving, and scheduling. A transport channel can be active or inactive on a per-TTI basis. When inactive, it does not carry a transport block, which may occur due to lack of data, discontinuous transmission (DTX), or scheduling decisions. The concept is used in specifications to define procedures for multiplexing, rate matching, and physical channel mapping, ensuring that the absence of data is properly handled.
The term appears in the context of GERAN, where transport channels like the Packet Data Channel (PDCH) or dedicated channels can be inactive. For example, in GPRS/EDGE, the MAC layer may decide not to send a transport block on a PDCH in a given TTI if there is no data to send or if the channel is reserved for other purposes. The physical layer then does not transmit on that channel, conserving resources and reducing interference. The specifications 44.118 (GERAN Iu mode) and 45.902 (GERAN A/Gb mode) provide the detailed definitions and procedures for handling inactive transport channels.
The concept is also relevant to the overall radio resource management. By identifying inactive channels, the network can make decisions about power control, channel allocation, and handover. For instance, if a transport channel is inactive for a certain period, the network may release resources or reconfigure the channel. The definition ensures a common understanding among different protocol layers and network nodes, facilitating interoperability and efficient operation.
Over the releases, the definition has remained unchanged, reflecting the stability of the concept. However, the surrounding technologies have evolved, with GERAN evolving towards higher data rates through EDGE Evolution and the introduction of new features like MIMO and dual-carrier. The inactive transport channel concept continues to be a fundamental part of the transport channel framework, ensuring that the absence of data is correctly interpreted and handled by the physical and MAC layers.
Purpose & Motivation
The Inactive Transport Channel concept exists to provide a clear and unambiguous definition of when a transport channel is not carrying data. In radio access networks, it is essential to distinguish between active and inactive periods to manage resources efficiently. Without such a definition, there could be confusion about whether a channel is transmitting a zero-length block or is simply idle, leading to potential misinterpretations in scheduling, power control, and interference management.
Historically, as GSM evolved to GPRS and EDGE, the need for packet-switched data transmission introduced shared channels and dynamic resource allocation. Transport channels became the interface between MAC and physical layers, and the concept of inactivity was necessary to handle DTX and discontinuous reception (DRX) mechanisms. The definition in 3GPP specifications ensures that all nodes have a common understanding, enabling features like power saving and interference reduction.
The concept also supports the design of physical layer procedures. For example, when a transport channel is inactive, the physical layer may not transmit a signal, which helps in reducing overall network interference and UE power consumption. It also aids in the implementation of rate matching and channel coding, as the absence of a transport block simplifies processing. Overall, the inactive transport channel definition is a foundational element for efficient and reliable packet data transmission in GERAN.
What changed in its specifications
The latest release-to-release comparison of specifications that define Inactive Transport Channel. Each summary describes the whole specification, not only this term.
Generic Access to A/Gb Interface defines MS actions for radio bearer mapping, transport format set and combination handling, and transport channel deletion; adds IEs for mapping, interleaving, mode, and transport channel identity.
Full comparison in TS 44.118 →Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Defining Specifications
3GPP specifications that define or reference Inactive Transport Channel, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 44.118 vg00 | Radio Resource Control (RRC) Protocol for Iu Mode | Rel-16 read |
| TR 45.902 vj00 | Flexible Layer One (FLO) for GERAN | Rel-19 read |