Description
IAB Simultaneous Operation is a key feature of Integrated Access and Backhaul (IAB) in 3GPP 5G networks, introduced in Release 17. IAB allows a base station (IAB-node) to provide both access links to user equipment (UE) and backhaul links to the core network via wireless connections, eliminating the need for fiber to every base station. An IAB-node consists of two logical entities: the IAB-DU (Distributed Unit) that serves UEs and the IAB-MT (Mobile Termination) that connects to the parent IAB-node or IAB-donor. Simultaneous operation means that the IAB-DU and IAB-MT can transmit at the same time, or receive at the same time, on their respective links. This is in contrast to half-duplex operation where they must take turns.
Simultaneous operation is challenging because the IAB-DU and IAB-MT are co-located and operate on potentially overlapping frequencies. When both transmit simultaneously, interference can occur if the transmit signals leak into the receive path of the other entity. Similarly, simultaneous reception can be affected by cross-link interference. To enable simultaneous operation, 3GPP specifications (e.g., TS 38.174 and TS 38.176) define RF requirements and interference mitigation techniques. These include spatial isolation through antenna separation, filtering, and advanced cancellation techniques. The specifications also define test cases to verify that the IAB-node meets the requirements under simultaneous operation conditions.
The benefit of simultaneous operation is improved spectral efficiency and reduced latency. In a multi-hop IAB topology, an IAB-node can relay data from its parent while simultaneously serving its child nodes or UEs, effectively increasing the overall capacity of the network. Without simultaneous operation, the IAB-node would need to alternate between backhaul and access, reducing throughput and increasing delay. Simultaneous operation is particularly important for dense deployments where IAB is used to provide coverage in hard-to-reach areas or to extend network capacity.
In terms of architecture, simultaneous operation requires coordination between the IAB-DU and IAB-MT. The IAB-node's scheduler must allocate resources for both entities in a way that avoids conflicts and manages interference. The 3GPP specifications define the RF requirements for simultaneous transmission and reception, including adjacent channel leakage ratio (ACLR), spurious emissions, and blocking characteristics. These requirements ensure that the IAB-node can operate in a real network without causing harmful interference to other nodes.
The feature has evolved across releases. In Release 17, the definition was introduced as part of the initial IAB specifications. Releases 18, 19, and 20 have maintained the definition, with ongoing enhancements to support new frequency ranges and deployment scenarios. As IAB becomes more prevalent in 5G-Advanced and 6G, simultaneous operation will be crucial for achieving the high capacity and low latency targets.
Purpose & Motivation
IAB Simultaneous Operation was created to overcome the limitations of half-duplex IAB nodes, which cannot transmit and receive at the same time on their backhaul and access links. In early IAB designs, the IAB-node had to time-share between backhaul and access, leading to reduced throughput and increased latency. This was a bottleneck for dense deployments where IAB is used to provide high-capacity coverage. Simultaneous operation allows the IAB-node to use its resources more efficiently, effectively doubling the potential throughput and reducing latency. It also simplifies network planning because the IAB-node can operate more like a conventional base station with full-duplex-like capabilities. The motivation came from the need to support demanding 5G use cases such as enhanced mobile broadband (eMBB) and ultra-reliable low-latency communication (URLLC) in areas where fiber backhaul is not available. By enabling simultaneous operation, 3GPP ensured that IAB can deliver performance comparable to fiber-connected base stations, making it a viable solution for 5G network densification.
Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Defining Specifications
3GPP specifications that define or reference IAB Simultaneous Operation, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 38.174 vk00 | NR Integrated Access and Backhaul Requirements | Rel-20 read |
| TS 38.176 vj40 | IAB Conformance Testing | Rel-19 read |