Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

IAB-MT RF Bandwidth

Integrated Access and Backhaul Mobile Termination Radio Frequency Bandwidth

Radio Access Network →

IAB-MT RF Bandwidth is the RF bandwidth in which an IAB-MT transmits and/or receives single or multiple carriers within a supported operating band, defining the IAB node mobile termination's overall capability for backhaul communication.

Introduced
Rel-16
Where
Radio Access Network › NG-RAN (5G)
Specifications
2 specs
IAB-MT RF Bandwidth Description Purpose Neighbours Specifications

Description

The IAB-MT RF bandwidth is a key radio frequency (RF) parameter defined for the Mobile Termination (MT) of an Integrated Access and Backhaul (IAB) node in 3GPP NR specifications. Unlike the IAB-MT channel bandwidth, which is per-carrier, the RF bandwidth represents the total RF bandwidth in which the IAB-MT can transmit and/or receive one or multiple carriers within a supported operating band. This parameter is essential for characterizing the IAB node's ability to support carrier aggregation and multi-carrier operation on its backhaul link. It is specified in 3GPP TS 38.174 for FR1 and TS 38.176 for FR2.

The IAB-MT RF bandwidth defines the frequency range over which the IAB-MT's transceiver can operate. It encompasses all the carriers that the IAB-MT can simultaneously transmit or receive, including their respective channel bandwidths and any guard bands between them. This parameter is used by the network to determine the maximum number of carriers and the total bandwidth that can be configured for the IAB-MT. It also influences the design of the IAB node's RF front-end, including filters, duplexers, and power amplifiers, as well as the baseband processing capabilities.

In the IAB architecture, the IAB-MT acts as a UE towards the parent node (donor gNB or another IAB node). The parent node schedules resources for the IAB-MT on the backhaul link. The IAB-MT RF bandwidth determines the set of carriers that the IAB-MT can monitor and use for communication. This is particularly important for carrier aggregation scenarios, where the IAB-MT may aggregate multiple carriers to increase backhaul capacity. The RF bandwidth must be sufficient to cover all aggregated carriers, which may be contiguous or non-contiguous within the operating band.

The IAB-MT RF bandwidth is also relevant for mobility and measurement procedures. The IAB-MT may need to perform measurements on neighboring cells or carriers, and its RF bandwidth determines which carriers it can measure simultaneously. This affects the IAB node's ability to perform handover and cell reselection. Additionally, the RF bandwidth is considered in interference coordination and spectrum sharing scenarios, as it defines the frequency range over which the IAB-MT can cause or experience interference.

The parameter is closely related to the IAB-MT channel bandwidth but provides a higher-level view of the IAB-MT's RF capabilities. While the channel bandwidth is used for per-carrier resource allocation and RF requirements, the RF bandwidth is used for overall capability signaling and network planning. For example, an IAB-MT may support an RF bandwidth of 100 MHz in FR1, which could accommodate multiple carriers of 20 MHz each. The network can then configure carrier aggregation based on this capability.

In summary, the IAB-MT RF bandwidth is a fundamental RF parameter that defines the total bandwidth capability of the IAB node's mobile termination for backhaul communication. It enables flexible and efficient use of spectrum for wireless backhaul, supporting the high-capacity requirements of 5G networks.

Purpose & Motivation

The IAB-MT RF bandwidth parameter exists to define the overall RF bandwidth capability of an IAB node's mobile termination, enabling support for single or multiple carriers within an operating band. It solves the problem of characterizing the IAB-MT's ability to aggregate carriers for increased backhaul capacity, which is essential for meeting the high data rate requirements of 5G. Before IAB, backhaul was typically provided by fiber or fixed microwave, which lacked flexibility and were costly to deploy. IAB enables wireless self-backhauling, and the RF bandwidth parameter ensures that the IAB-MT can efficiently utilize available spectrum, including carrier aggregation.

The parameter also addresses the need for interoperability and network planning. By specifying the RF bandwidth, the standard allows network operators to understand the capabilities of IAB nodes and plan their deployments accordingly. It ensures that IAB nodes can coexist with other NR and LTE transmissions and meet regulatory requirements. The RF bandwidth is used in capability signaling, allowing the network to configure the IAB-MT appropriately.

Furthermore, the IAB-MT RF bandwidth supports the evolution of IAB towards higher capacities and more flexible deployments. As IAB technology matures, the RF bandwidth parameter enables the support of wider bandwidths and more carriers, facilitating the deployment of IAB in dense urban environments and mmWave bands where large bandwidths are available.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-16 Initial

Introduced the definition of IAB-MT RF bandwidth as part of the initial IAB specification. It established the RF bandwidth in which an IAB-MT transmits and/or receives single or multiple carriers within a supported operating band, enabling carrier aggregation for backhaul.

The definition carried over unchanged from Rel-16.

The definition carried over unchanged from Rel-16.

The definition carried over unchanged from Rel-16.

The definition carried over unchanged from Rel-16.

Defining Specifications

3GPP specifications that define or reference IAB-MT RF Bandwidth, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 38.174 vk00 NR Integrated Access and Backhaul Requirements Rel-20 read
TS 38.176 vj40 IAB Conformance Testing Rel-19 read