Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Mobility

Handover in

Handover In (to GAN)

Mobility →

Handover in is a mobility procedure where a mobile station moves from a 3GPP access network, such as GERAN or UTRAN, to a Generic Access Network, enabling seamless service continuity when transitioning to Wi-Fi or other IP-based access.

Introduced
Rel-8
Where
Radio Access Network
Specifications
2 specs
Handover in Description Purpose What changed Neighbours Specifications

Description

Handover in is a mobility procedure defined in 3GPP specifications for Generic Access Network (GAN), also known as Unlicensed Mobile Access (UMA). It describes the scenario where a mobile station (MS) moves from a 3GPP access network, such as GERAN (GSM/EDGE Radio Access Network) or UTRAN (UMTS Terrestrial Radio Access Network), to a GAN access network. GAN provides a way to access 3GPP services over generic IP access networks, such as Wi-Fi, Bluetooth, or fixed broadband. The handover in procedure is specified in 3GPP TS 43.318 (Generic Access Network (GAN) Stage 2) and TS 43.901 (Feasibility study on generic access to A/Gb interface).

The handover in procedure is part of the broader GAN architecture, which allows a mobile station to connect to the core network through a GAN Controller (GANC) instead of a traditional base station subsystem. The GANC appears to the core network as a base station controller (BSC) or radio network controller (RNC), and it manages the GAN access for the mobile station. When the mobile station moves from a 3GPP access network to a GAN, the handover in procedure ensures that the ongoing session (e.g., voice call, data session) is maintained without interruption. This involves coordination between the source 3GPP access network, the target GAN, and the core network to transfer the session context and re-establish the bearer paths.

The handover in procedure typically involves several steps. First, the mobile station detects the availability of a GAN access network and decides to initiate a handover. This decision may be based on signal quality, user preference, or operator policy. Second, the mobile station establishes connectivity to the GANC over the IP access network and registers with the GAN. Third, the GANC initiates the handover procedure with the core network, which may involve the MSC (Mobile Switching Center) or SGSN (Serving GPRS Support Node) for circuit-switched or packet-switched services, respectively. The core network then coordinates the release of resources in the source 3GPP access network and the establishment of resources in the GAN. Finally, the mobile station completes the handover and continues its session over the GAN.

The handover in procedure is complementary to the handover out procedure, which describes the reverse scenario where the mobile station moves from GAN to a 3GPP access network. Together, these procedures enable seamless mobility between cellular and IP-based access networks, which is a key requirement for services like voice call continuity (VCC) and fixed-mobile convergence. The handover in procedure is particularly important for users who start a call on the cellular network while outside the home and then move into Wi-Fi coverage, where the call can be handed over to the GAN to save cellular resources and improve coverage.

From a standards perspective, the handover in procedure has been part of the GAN specifications since Release 8 and has been carried forward unchanged through Release 19. The definition has remained stable, reflecting the maturity of the GAN architecture. While GAN itself has seen limited deployment compared to other access technologies, the concept of handover between 3GPP and non-3GPP access has been carried forward into LTE and 5G specifications, where similar procedures exist for handover between E-UTRAN and WLAN (e.g., ANDSF, RAN-assisted WLAN interworking) and between 5G NR and non-3GPP access (e.g., untrusted non-3GPP access via N3IWF).

Purpose & Motivation

The handover in procedure exists to enable seamless service continuity when a mobile station transitions from a 3GPP access network to a Generic Access Network. This is important because users increasingly expect their calls and data sessions to continue without interruption as they move between different access technologies. Without handover in, a call started on the cellular network would be dropped when the user moves into Wi-Fi coverage, forcing them to redial and degrading the user experience.

The procedure was motivated by the desire to leverage unlicensed spectrum (e.g., Wi-Fi) for mobile services, particularly in indoor environments where cellular coverage may be weak. By handing over to GAN, operators can offload traffic from their licensed spectrum and improve coverage and capacity. This is especially valuable in homes and offices where Wi-Fi is ubiquitous and cellular signals may be attenuated by building materials.

Historically, GAN was introduced in 3GPP Release 6 as UMA (Unlicensed Mobile Access) and later standardized as GAN in Release 7 and 8. The handover in procedure was defined as part of the GAN specifications to provide a standardized way to transition between cellular and GAN access. While GAN itself did not achieve widespread commercial success, the concepts and procedures developed for GAN influenced later work on WLAN interworking in LTE and 5G, where similar handover procedures are used to manage mobility between 3GPP and non-3GPP access. The handover in procedure thus represents an early example of the fixed-mobile convergence and multi-access mobility that are now central to 5G networks.

What changed in its specifications

The latest release-to-release comparison of specifications that define Handover in. Each summary describes the whole specification, not only this term.

TS 43.318Rel-6 → Rel-7

Rel-7 adds PS handover between GERAN/UTRAN mode and GAN mode (GUGAN), covering new definitions, state updates, and transport channel handling. It is the only feature overview provided, so this brief cannot name four to six items.

Full comparison in TS 43.318 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-8 Initial

Initial definition: 'mobile station moves from 3GPP access networks to GAN.' This established the basic concept of handover from cellular to generic access network.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8.

Definition carried over unchanged from Rel-8, with minor formatting adjustment (line break removed).

Definition carried over unchanged from Rel-17.

Definition reverted to the Rel-8 formatting with line break, but content unchanged.

Defining Specifications

3GPP specifications that define or reference Handover in, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 43.318 vj00 Generic Access Network (GAN) Stage 2 Rel-19 read
TR 43.901 vj00 Generic Access to A/Gb Interface Feasibility Study Rel-19 read