Description
The granularity period is a fundamental concept in 3GPP performance management (PM). It specifies the time interval between the initiation of two successive gatherings of measurement data by the Performance server (also known as the Producing Application). In essence, it determines how frequently performance measurements (often called Performance Indicators or KPIs) are sampled and recorded. The granularity period is configured by the network management system and can range from seconds to hours, depending on the measurement type and the operational requirements.
In the 3GPP management architecture, the Performance server is responsible for collecting and aggregating performance data from network elements (NEs) such as gNBs, AMFs, SMFs, and UPFs. The granularity period defines the cadence of this collection. For example, a granularity period of 5 minutes means that every 5 minutes, the Performance server initiates a new measurement window, gathers raw counters, and computes the performance indicators for that interval. The resulting measurements are then stored and can be retrieved by the management system for analysis, reporting, or closed-loop automation.
The granularity period is closely tied to the concept of measurement jobs and files. In 3GPP TS 32.411 and TS 32.863, the granularity period is an attribute of the measurement job configuration. It must be aligned with the capabilities of the network element and the desired reporting frequency. A shorter granularity period provides more detailed data but increases the processing and storage load on both the NE and the management system. Conversely, a longer period reduces overhead but may miss short-term anomalies.
Operationally, the granularity period is used in conjunction with other PM parameters such as the reporting period (how often measurement files are generated) and the collection period (how often the management system retrieves the files). The granularity period is the finest level of time resolution for the measurements themselves. It is important to note that the granularity period is not necessarily the same as the reporting period; measurements may be aggregated over multiple granularity periods before being reported.
In summary, the granularity period is a key configuration parameter that balances the trade-off between measurement detail and network resource consumption. It enables operators to tailor performance monitoring to specific use cases, such as troubleshooting, capacity planning, or SLA assurance, by adjusting the sampling rate accordingly.
Purpose & Motivation
The granularity period exists to provide a standardized, configurable mechanism for controlling the sampling rate of performance measurements in 3GPP networks. Before its introduction, performance data collection was often vendor-specific and lacked a common definition, making it difficult to compare KPIs across multi-vendor networks. By defining the granularity period as the time between successive measurement gatherings, 3GPP enabled interoperable performance management, allowing operators to uniformly configure and interpret measurements. It solves the problem of data volume versus detail: operators can choose a granularity that matches their operational needs, from fine-grained monitoring for real-time optimization to coarse-grained trending for long-term planning. The concept has remained stable since Rel-8, underscoring its fundamental role in PM.
Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
The definition was revised to describe the granularity period as the sampling rate of Performance Measurements, determined by the Producing Application. This wording change emphasized the role of the Performance server and the rate of producing measurements, aligning with evolving management architectures.
Defining Specifications
3GPP specifications that define or reference Granularity period, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 32.411 vj00 | PM IRP Requirements | Rel-19 read |
| TS 32.863 vd00 | Performance Measurement Metadata | Rel-13 read |