Description
The Figure of Merit (FOM) is a concept introduced in 3GPP Release 13 within the Self-Organizing Networks (SON) framework, specifically documented in the management specifications 37.842 (Evolved Universal Terrestrial Radio Access Network (E-UTRAN) — Self-Organizing Networks (SON) — Mobility Robustness Optimization) and 37.843 (E-UTRAN SON — Mobility Load Balancing). A FOM is a scalar or composite metric that quantifies how well a given network configuration or optimization action performs against a defined objective. It allows an operator's management system, typically the Element Manager (EM) or the Network Manager (NM), to evaluate the outcome of SON functions in a consistent and comparable manner.
In the architecture, the FOM is computed by the SON function — for example, the Mobility Robustness Optimization (MRO) function or the Mobility Load Balancing (MLB) function — and reported to the management layer. The management layer uses the FOM to decide whether a proposed parameter change should be accepted, rejected, or rolled back. The FOM therefore acts as the feedback signal in the closed-loop SON control process. Different SON use cases define their own FOMs: for MRO, the FOM may reflect the rate of radio link failures, handover failures, or ping-pong handovers; for MLB, it may reflect the balance of load across cells while preserving quality of service.
The FOM is typically expressed as a normalized value (for example, a percentage or a ratio) so that heterogeneous metrics can be aggregated and compared. The 3GPP specifications define the FOM as a performance indicator that the SON function reports, along with the associated policy and the target configuration. The management system can then apply a policy — for example, accept the change only if the FOM improves by a defined margin — to avoid oscillation and instability in the network.
A key design consideration is that the FOM must be measurable and reproducible. The specifications define how the FOM is reported over the management interface (Itf-N) and how it relates to the performance measurements defined in the Performance Management (PM) specifications. This linkage ensures that the FOM is grounded in standardized measurements rather than vendor-specific heuristics, enabling multi-vendor interoperability in SON deployments.
The FOM concept is fundamental to the automation of network operations. By providing a common, standardized way to express the quality of an optimization outcome, it enables SON functions to operate autonomously while remaining under operator policy control. It also supports the comparison of different optimization strategies and the auditing of SON decisions, which is important for regulatory and operational transparency.
Purpose & Motivation
The Figure of Merit exists to solve a fundamental problem in self-organizing networks: how to objectively and consistently evaluate whether an automated optimization action has improved or degraded network performance. Before the introduction of standardized FOMs, SON functions used vendor-specific metrics and decision criteria, which made it difficult for operators to compare solutions, to combine SON functions from multiple vendors, and to apply consistent policies across a heterogeneous network. The FOM provides a common language for expressing optimization quality.
Historically, network optimization was a manual, expert-driven process. With the introduction of SON in 3GPP Release 8 and its refinement in later releases, the industry moved toward closed-loop automation. However, automation without a reliable feedback metric risks instability — for example, a mobility load balancing function might shift load back and forth between cells (ping-pong effects) if it cannot measure the true benefit of a change. The FOM addresses this by giving the SON function and the management system a quantitative basis for accepting, rejecting, or reverting changes.
The FOM also supports multi-vendor and multi-technology environments. Because it is defined in 3GPP management specifications and tied to standardized performance measurements, it allows an operator to deploy SON functions from different vendors and still evaluate them on a common scale. This interoperability was a major motivation for standardizing the concept in Release 13.
Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Defining Specifications
3GPP specifications that define or reference FOM, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 37.842 vd30 | AAS Base Station RF Requirements Study | Rel-13 read |
| TR 37.843 vf70 | AAS BS Radiated RF Requirement Background | Rel-15 read |