Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · IoT

eRemote-UE

E-UTRA Remote User Equipment

IoT →

eRemote-UE is a UE connected to the network via indirect 3GPP communication through an eRelay-UE, enabling coverage extension and connectivity for devices out of direct network range.

Introduced
Rel-15
Where
Services
Specifications
2 specs
eRemote-UE Description Purpose Neighbours Specifications

Description

eRemote-UE (E-UTRA Remote User Equipment) is a term introduced in 3GPP Release 15 and specified in TS 23.733 and TS 33.843. It defines a UE that is connected to a network using an Indirect 3GPP Communication. In this mode, the eRemote-UE does not have a direct radio link to the base station (gNB/eNB); instead, it communicates via an eRelay-UE, which forwards its traffic to the network. This concept is part of the Proximity Services (ProSe) framework and is designed to extend network coverage and enable connectivity for devices that are out of coverage or have limited radio capabilities.

The eRemote-UE connects to the eRelay-UE over a direct link, which can be E-UTRA (PC5 sidelink), WLAN, or Bluetooth, as defined for the relay. The eRemote-UE uses the relay as a Layer 2 forwarder, meaning that its NAS and RRC protocols are terminated at the network, not at the relay. The relay simply forwards packets between the eRemote-UE and the network. This allows the network to manage the eRemote-UE's context, mobility, and security as if it were directly connected, while the relay provides the physical transport.

From the network perspective, the eRemote-UE is authenticated and authorized like any other UE, but its connection is established via the relay. The core network (e.g., MME or AMF) maintains the UE's context and may be unaware of the relay's presence, depending on the architecture. The relay selection and discovery procedures allow the eRemote-UE to find a suitable relay based on criteria such as signal strength, relay capabilities, and operator policy. The eRemote-UE may also switch between relays for mobility.

Security is a key consideration. The eRemote-UE's traffic must be protected end-to-end between the UE and the network, with the relay only forwarding encrypted packets. This is achieved through the security mechanisms defined in TS 33.843, which include mutual authentication between the eRemote-UE and the network, and possibly between the eRemote-UE and the relay. The relay itself is authenticated to the network, and the eRemote-UE verifies the relay's authorization before using its services.

eRemote-UE is used in scenarios such as public safety (first responders in areas without coverage), wearables (smartwatches using a smartphone as relay), and IoT (sensors using a nearby gateway). It enables devices with limited power or antenna capabilities to access the network indirectly, leveraging the relay's better link to the network.

Purpose & Motivation

eRemote-UE was defined to enable devices to connect to the 3GPP network when they cannot establish a direct link, either due to being out of coverage, having limited transmission power, or lacking the necessary radio capabilities. Prior to Rel-15, such devices would be isolated or require proprietary solutions. The standardized eRemote-UE concept allows any authorized device to use a relay UE to access network services, ensuring interoperability and security.

The motivation includes coverage extension for public safety and mission-critical communications, where direct network access may be unavailable (e.g., in basements, tunnels, or disaster areas). By using a relay, first responders can maintain connectivity. For consumer devices like wearables, relaying allows low-power devices to offload their connectivity to a smartphone, reducing cost and power consumption. The use of multiple radio technologies (E-UTRA, WLAN, Bluetooth) ensures that the eRemote-UE can connect to a wide range of relay devices, including smartphones and vehicles.

The Layer 2 relay architecture was chosen to allow the network to manage the eRemote-UE seamlessly, without requiring changes to the core network. The eRemote-UE is treated as a normal UE from the network's perspective, which simplifies deployment and integration. The 3GPP standardization ensures that the security and privacy of the eRemote-UE's traffic are maintained, which is critical for commercial adoption.

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-15 Initial

Initial definition introduced eRemote-UE as a UE connected to the network using indirect 3GPP communication via an eRelay-UE. This established the concept of remote connectivity through relays, with security and architectural details specified in TS 23.733 and TS 33.843.

Defining Specifications

3GPP specifications that define or reference eRemote-UE, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 23.733 vf10 Study on ProSe UE-to-Network Relay Architecture Rel-15 read
TS 33.843 vf10 Security Study for ProSe UE-to-Network Relay Rel-15 read