Description
eRedCap (enhanced Reduced Capability) is a UE category introduced in 3GPP Release 18 and carried into Release 19, specified primarily in TS 38.101 (UE radio transmission and reception) and TS 38.521 (UE conformance specification). It defines a device with reduced peak data rate, with or without reduced baseband bandwidth in FR1, as captured in clause 4.2.22 of TS 38.306. The term extends the RedCap concept from Release 17, which itself introduced a UE class between the high-end NR devices and the narrowband LPWA technologies (NB-IoT and LTE-M). eRedCap targets use cases such as wearables, industrial sensors, and low-cost video surveillance that require more throughput than LPWA but do not need full NR capabilities.
Architecturally, eRedCap operates within the NR framework. It reuses the NR physical layer, RRC, and core network interfaces but constrains the UE's capabilities. The reduced peak data rate is achieved by limiting the number of supported layers, modulation orders, and bandwidth configurations. The optional reduced baseband bandwidth in FR1 allows the UE to operate with a narrower channel than the standard NR bandwidth, reducing baseband processing complexity and power consumption. This is particularly relevant for devices with limited battery capacity and cost-sensitive BOMs.
The specification work in TS 38.101 defines the RF requirements for eRedCap UEs, including transmitter and receiver characteristics, while TS 38.521 provides the corresponding conformance test procedures. These ensure that eRedCap devices can coexist with full-capability NR UEs in the same network without causing harmful interference or degrading performance. The reduced bandwidth option requires careful definition of the RF front-end and baseband filtering to maintain compliance with the general NR emission masks.
In the network, eRedCap UEs are identified via capability signaling during RRC connection establishment. The gNB can then apply appropriate scheduling, link adaptation, and mobility policies. Because eRedCap devices may have limited processing, the network can configure them with simpler measurement and reporting configurations. The core network (5GC) also needs to be aware of the device type for policy and charging, though the primary differentiation is at the RAN level.
eRedCap is part of the broader 5G ecosystem evolution toward massive IoT. It complements RedCap (Rel-17) and LPWA by offering a middle tier of performance and cost. The Rel-19 continuation indicates ongoing refinement, likely addressing additional bands, power saving enhancements, and integration with network slicing and 5G-Advanced features.
Purpose & Motivation
eRedCap exists to fill a performance and cost gap in the 5G device landscape. Release 17 RedCap introduced a UE class with reduced capabilities compared to full NR, but there remained a need for even lower-cost devices that still require higher data rates than NB-IoT or LTE-M can provide. Wearables, smart meters, and industrial sensors often need moderate throughput (e.g., for firmware updates or video) but cannot justify the cost and power of full NR. eRedCap addresses this by further reducing peak data rate and optionally baseband bandwidth, enabling cheaper chipsets and longer battery life.
Historically, the IoT market was served by a mix of 2G/3G (now sunsetting), LTE-M, and NB-IoT. These LPWA technologies offer very low throughput and are optimized for massive connection density. However, some applications require higher data rates, lower latency, or better mobility than LPWA can deliver. RedCap was the first step, but its capabilities still exceeded the needs of many low-end applications. eRedCap narrows the feature set further, allowing device makers to optimize for cost and power without sacrificing NR compatibility.
The motivation also includes network efficiency. By defining a standardized reduced-capability UE, operators can manage these devices with predictable performance and avoid proprietary optimizations. eRedCap ensures that such devices can be served by the same NR infrastructure, benefiting from features like network slicing and 5G security, while not overloading the network with unnecessary signaling or resource consumption.
Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Defining Specifications
3GPP specifications that define or reference eRedCap, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 38.101 vj40 | UE Radio Transmission and Reception; Satellite Access | Rel-19 read |
| TS 38.521 vj10 | UE Conformance Spec for NR Satellite Access | Rel-19 read |