Description
Early Data Forwarding (EDF) is a mobility enhancement introduced in 3GPP Release 16 that allows user plane data to be forwarded from the source base station to the target base station before the UE actually executes the handover. In a conventional handover procedure, data forwarding typically begins only after the handover command has been sent to the UE and the source node has stopped transmitting new data to the UE. This creates a window during which downlink packets may be buffered or dropped, contributing to handover interruption time. EDF changes this by initiating the forwarding of data earlier in the handover preparation phase, so that the target node already has data available when the UE arrives.
The mechanism relies on the handover preparation signalling exchanged between the source and target nodes over the Xn interface (in 5G) or X2 interface (in LTE). During the preparation phase, the source node decides to hand over the UE and sends a Handover Request to the target. With EDF, the source node may begin forwarding downlink user data to the target before the UE receives the RRC reconfiguration message that triggers the handover execution. The target node buffers this early-forwarded data and can deliver it to the UE immediately after the random access procedure completes and the UE is synchronized to the target cell. This reduces the data gap experienced by the UE during mobility.
Architecturally, EDF involves the source gNB or eNB, the target gNB or eNB, and the core network user plane function (UPF or S-GW). The forwarding path is established as part of the handover preparation, and the source node uses a forwarding tunnel to send packets to the target. The target node maintains a buffer for the forwarded data and associates it with the UE context created during handover preparation. When the UE completes the handover, the target node delivers the buffered data according to the PDCP sequence numbering, preserving in-order delivery and minimizing duplicate or out-of-order packets.
EDF is particularly beneficial for latency-sensitive services and for scenarios with high handover frequency, such as dense urban deployments or high-speed mobility. By pre-forwarding data, the target cell can maintain service continuity and reduce the perceived interruption. The feature is specified in 3GPP TS 36.300 (E-UTRAN overall description), TS 38.300 (NR overall description), and TS 38.401 (NG-RAN architecture), which define the handover procedures and the forwarding behaviour. It complements other mobility enhancements such as conditional handover and dual active protocol stack (DAPS) handover, which also aim to reduce interruption time.
In terms of operation, the source node must decide when to start early forwarding. This decision can be based on measurement reports, expected handover timing, and buffer status. The target node must be prepared to receive and buffer data before the UE arrives, which requires sufficient buffer capacity and proper coordination. The forwarding tunnel is typically established using GTP-U over the Xn/X2 interface. Security and integrity protection are maintained because the forwarded data remains within the trusted network infrastructure. Overall, EDF is a key enabler for seamless mobility in 5G and beyond, contributing to the ultra-reliable low-latency communication (URLLC) and enhanced mobile broadband (eMBB) requirements.
Purpose & Motivation
Early Data Forwarding was created to address the data interruption that occurs during handover in mobile networks. In traditional handover, the source node stops sending data to the UE once the handover decision is made, and forwarding to the target begins only after the UE has executed the handover. This leads to a gap in data delivery, which can degrade user experience for latency-sensitive applications and reduce throughput. EDF solves this by starting the forwarding process earlier, allowing the target node to have data ready when the UE arrives.
The motivation comes from the increasing demand for seamless mobility in 5G networks, where services such as cloud gaming, augmented reality, and industrial automation require minimal interruption. Previous approaches, such as buffering at the source and forwarding after handover, were insufficient because they still left a window where the UE received no data. EDF leverages the handover preparation phase to pre-forward data, effectively hiding the forwarding latency from the user.
Historically, handover interruption time has been a key performance indicator in cellular networks. With the introduction of 5G and the need to support ultra-reliable low-latency communications, reducing interruption became more critical. EDF, standardized in Release 16, builds on earlier mobility enhancements and is part of a broader set of features aimed at minimizing mobility impact. It is particularly relevant for networks with high handover rates and for services that cannot tolerate even short data gaps.
What changed in its specifications
The latest release-to-release comparison of specifications that define Early Data Forwarding. Each summary describes the whole specification, not only this term.
Rel-19 added NTN IoT Phase 3 for LTE, covering regenerative payload S1 removal, Msg3 early data transmission, and ETWS/CMAS for NB-IoT NTN. It also added inter-RAT mobility from E-UTRAN terrestrial network to NR NTN, plus NR NTN feeder link switchover via handover.
Full comparison in TS 36.300 →Rel-19 adds multi-hop L2 UE-to-Network relay for NR sidelink as the largest item. It also adds low-power wake-up signal and receiver (LP-WUS/WUR) text, on-demand SSB and SIB1 for network energy savings, and sub-band full duplex for TDD carriers.
Full comparison in TS 38.300 →Release Timeline
Detected Changes Across Releases
from 3GPP Change RequestsSpecific changes extracted from the „Change history“ tables of 3GPP specifications (2 CRs across 2 releases). Complements the general historical overview above with the evidence-based evolution of this function.
Defining Specifications
3GPP specifications that define or reference Early Data Forwarding, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 36.300 vj20 | E-UTRAN Radio Interface Protocol Architecture | Rel-19 read |
| TS 38.300 vj40 | NR and NG-RAN Overall Description | Rel-19 read |
| TS 38.401 vj30 | NG-RAN Architecture Description | Rel-19 read |