Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

E-UTRA-NR Dual Connectivity

E-UTRA-NR Dual Connectivity

Radio Access Network →

E-UTRA-NR Dual Connectivity is a dual connectivity mode where an RRC_CONNECTED UE simultaneously uses E-UTRA MCG cells and NR SCG cells; it was the first NR deployment option, allowing 5G capacity to be added to existing LTE coverage.

Introduced
Rel-15
Where
Radio Access Network › E-UTRAN (LTE)
Specifications
2 specs
E-UTRA-NR Dual Connectivity Description Purpose What changed Neighbours Specifications

Description

E-UTRA-NR Dual Connectivity (EN-DC) is defined in TS 36.331 (RRC) and TS 36.423 (X2AP), with the overall multi-connectivity architecture specified in TS 37.340. In EN-DC, a UE in RRC_CONNECTED state is configured with a Master Cell Group (MCG) using E-UTRA and a Secondary Cell Group (SCG) using NR. The master node (MN) is an LTE eNB that controls the RRC connection and handles mobility, while the secondary node (SN) is an NR gNB that provides additional user-plane capacity and, optionally, split signalling radio bearers.

The architecture relies on the X2 interface between the eNB and the gNB for control-plane coordination (SN addition, modification, release) and on the S1-U interface for user-plane data. The core network is EPC, not 5GC, which is why EN-DC is often called the non-standalone (NSA) deployment option. User-plane traffic can be split at the MN using the LTE PDCP layer, with bearers routed either via the MN, via the SN, or split across both, depending on the configured bearer type (MCG bearer, SCG bearer, or split bearer).

At the radio level, the UE maintains two independent MAC entities, one for the LTE link and one for the NR link, each with its own HARQ and scheduling. The PDCP layer is anchored in the MN for split bearers, and reordering is performed at PDCP to handle the different latencies of the two links. The RRC connection is terminated in the MN, and the NR SCG configuration is delivered to the UE via LTE RRC signalling (RRCConnectionReconfiguration with an NR secondaryCellGroup container), which is a key feature that allows legacy LTE signalling to bootstrap NR.

EN-DC supports both synchronous and asynchronous operation between the two nodes, and the UE reports its EN-DC capability (band combinations, power sharing, etc.) to the network. Power control must coordinate the LTE and NR uplinks to respect SAR and emission limits, which is one of the more complex aspects of UE implementation. The SN can also be changed without dropping the connection (SN change procedure), and the MN can be changed via handover while the SCG is released and re-added.

EN-DC was the workhorse of early 5G deployments because it allowed operators to reuse their LTE coverage and EPC core while adding NR carriers for capacity. It remains specified through Rel-19, although later releases introduced NGEN-DC (NR MN with E-UTRA SCG connected to 5GC) and NR-DC (NR-NR dual connectivity) for standalone deployments.

Purpose & Motivation

EN-DC was created to enable early 5G deployment without requiring a full standalone 5G core network and NR coverage. When 3GPP began work on NR in Rel-15, operators had extensive LTE coverage and EPC deployments but no NR coverage and no 5GC. Building a standalone NR network from scratch would have delayed 5G services by years. EN-DC solved this by allowing NR to be added as a secondary node to an existing LTE master node, reusing the LTE RRC connection, EPC core, and coverage layer.

The concept addresses the coverage-capacity mismatch: NR at higher frequencies provides capacity but limited coverage, while LTE at lower frequencies provides ubiquitous coverage. By anchoring the control plane in LTE and adding NR for user-plane capacity, operators can deliver enhanced mobile broadband rates where NR coverage exists while falling back to LTE elsewhere. The dual connectivity framework from Rel-12 (LTE-LTE DC) was extended to support the inter-RAT case, including new signalling containers to carry NR configuration over LTE RRC.

EN-DC also motivated the development of the multi-connectivity architecture in TS 37.340, which later generalized to NGEN-DC and NR-DC. It established the MN/SN split, the bearer type taxonomy (MCG, SCG, split), and the SN addition/change procedures that underpin all subsequent dual connectivity variants.

What changed in its specifications

The latest release-to-release comparison of specifications that define E-UTRA-NR Dual Connectivity. Each summary describes the whole specification, not only this term.

TS 36.331Rel-18 → Rel-19

Rel-19 adds NTN-for-IoT Phase 3 and inter-RAT mobility from E-UTRAN to NR NTN, plus LTE-based 5G Broadcast Phase 2 changes. It also adds IMS disaster-roaming access barring, NTN-for-NR Phase 3 fields, and NR RRM Phase 5 items.

Full comparison in TS 36.331 →
TS 36.423Rel-12 → Rel-13

Rel-13 added enhanced signalling for inter-eNB CoMP with CSI reporting to RESOURCE STATUS procedures, SON for AAS with relative narrowband transmit power reporting and cell coverage modification, and multicarrier load distribution with X2 removal, coverage state, cell replacement, and band priority signalling.

Full comparison in TS 36.423 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-15 Initial

Initial definition introduced alongside the first NR specifications. EN-DC established the master node / secondary node architecture, bearer type taxonomy, and LTE RRC signalling containers for NR configuration, enabling non-standalone 5G deployment over EPC.

Definition carried over unchanged from Rel-15.

Definition carried over unchanged from Rel-15.

Definition carried over unchanged from Rel-15.

Definition text is substantively the same as Rel-15; only line-wrapping/formatting of the quoted text differs, with no change to the technical meaning.

Defining Specifications

3GPP specifications that define or reference E-UTRA-NR Dual Connectivity, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 36.331 vj40 E-UTRA Radio Resource Control (RRC) Protocol Rel-19 read
TS 36.423 vj10 X2 Application Protocol (X2AP) Specification Rel-19 read