Description
Camped on any cell is an idle-mode state defined in the 3GPP cell selection specifications (TS 25.304, TS 25.367, TS 36.304, TS 38.304). In normal operation, a UE attempts to camp on a suitable cell belonging to its selected PLMN (or an equivalent PLMN). When no such suitable cell can be found, the UE may instead camp on an acceptable cell — a cell that satisfies basic radio criteria but may belong to a different PLMN or offer only limited service. The state of being camped on such a cell, irrespective of PLMN identity, is termed camped on any cell.
The cell selection process has two phases. First, the UE performs PLMN selection, choosing a PLMN from those available. Second, it performs cell selection, searching for a suitable cell of that PLMN. A suitable cell must meet criteria including radio quality thresholds (Srxlev/Squal), not being barred, and belonging to the selected PLMN or an equivalent one. If no suitable cell is found, the UE enters the any-cell selection process, where it looks for an acceptable cell. An acceptable cell must satisfy the basic radio criteria and not be barred, but PLMN identity is not a constraint. Camping on such a cell is recorded as camped on any cell.
The practical consequence of this state is limited service. While camped on any cell, the UE can attempt emergency calls and may receive limited service such as ETWS/CMAS public warning messages, but it cannot obtain normal service (e.g., originating regular calls, receiving paging for normal services) unless it later finds a suitable cell. The UE periodically re-runs the cell selection/reselection process to detect whether a suitable cell of the selected PLMN has become available, at which point it transitions to normal camping.
This state is important for mobility robustness. It ensures that a UE that has lost coverage of its home PLMN can still access emergency services and receive critical public warnings, rather than remaining completely out of service. It also governs behavior when the UE is roaming into areas where only other operators' cells are available.
The concept is standardized across radio access technologies: TS 25.304 for UTRAN, TS 36.304 for E-UTRAN, and TS 38.304 for NR, with TS 25.367 covering idle-mode mobility procedures. The definition has remained stable from Rel-8 through Rel-19, reflecting its fundamental role in idle-mode mobility.
Purpose & Motivation
Camped on any cell exists to solve a fundamental problem in idle-mode mobility: what should a UE do when it cannot find a suitable cell of its selected PLMN? Without this state, a UE that lost coverage of its home network would be entirely out of service, unable to make even emergency calls or receive life-saving public warnings. The state provides a graceful degradation path, allowing limited service rather than no service.
The concept also supports regulatory and safety requirements. Emergency call access and public warning systems (ETWS, CMAS, PWS) must function even when a subscriber's home PLMN is unavailable. By permitting camping on an acceptable cell irrespective of PLMN, the standards ensure that these critical services remain reachable.
Historically, early cellular systems had simpler idle-mode models that did not clearly separate PLMN selection from cell selection. The 3GPP approach, refined across UTRAN, E-UTRAN, and NR, formalizes the distinction between suitable and acceptable cells, giving UEs a well-defined fallback state. This enables consistent behavior across vendors and technologies and underpins robust roaming and out-of-coverage handling.
What changed in its specifications
The latest release-to-release comparison of specifications that define Camped on any cell. Each summary describes the whole specification, not only this term.
Rel-19 adds Non-Terrestrial Networks (NTN) for IoT Phase 3 for LTE to 3GPP TS 25.304. It also adds a list of PLMNs with associated access technology restrictions to idle-mode cell selection and reselection.
Full comparison in TS 25.304 →Adds PLMN reporting for CSG/hybrid cells in handover and measurement procedures; extends CSG cell reselection rules to Cell_FACH.
Full comparison in TS 25.367 →Release Timeline
Detected Changes Across Releases
from 3GPP Change RequestsSpecific changes extracted from the „Change history“ tables of 3GPP specifications (3 CRs across 1 releases). Complements the general historical overview above with the evidence-based evolution of this function.
Defining Specifications
3GPP specifications that define or reference Camped on any cell, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 25.304 vj10 | UE Idle Mode Procedures | Rel-19 read |
| TS 25.367 vj00 | Home NodeB Mobility Procedures | Rel-19 read |
| TS 36.304 vj30 | LTE UE Idle Mode Procedures | Rel-19 read |
| TS 38.304 vj30 | NR UE Idle and Inactive State Procedures | Rel-19 read |