Description
The Aggregated Transmission Bandwidth Configuration is a physical-layer and RF requirement concept defined in 3GPP TS 36.101 (UE radio transmission and reception), TS 36.521 (UE conformance specification), and TS 36.899 (EMC requirements). It specifies the number of resource blocks (RBs) allocated within the aggregated channel bandwidth when carrier aggregation is used. While the aggregated channel bandwidth is expressed in MHz and describes the RF span, the aggregated transmission bandwidth configuration is expressed in resource blocks and describes the actual schedulable resource grid within that span. The two concepts are complementary: the channel bandwidth sets the outer RF boundary, and the transmission bandwidth configuration defines how many RBs fit inside after accounting for guard bands and the channel raster.
In the LTE physical layer, a resource block occupies 180 kHz (12 subcarriers of 15 kHz each) and spans one slot in the time domain. For a single carrier, the transmission bandwidth configuration N_RB is defined per channel bandwidth (e.g., 50 RBs for 10 MHz, 100 RBs for 20 MHz). When carrier aggregation is introduced, multiple component carriers are combined, and the aggregated transmission bandwidth configuration is the sum of the RBs across the aggregated carriers, subject to the constraint that the carriers are contiguous within the aggregated channel bandwidth. This concept is essential for defining the maximum number of RBs that a UE or base station can schedule or receive in a given aggregated bandwidth, and it feeds directly into RF test cases that verify transmitter and receiver performance at the edges of the resource grid.
The concept works together with the NR equivalent definitions in TS 38.101, where similar relationships between channel bandwidth, transmission bandwidth configuration, and guard bands are defined for NR numerologies. In LTE, the aggregated transmission bandwidth configuration is used in conformance testing to verify that a UE can correctly transmit and receive at the maximum RB allocation within the aggregated bandwidth, and that its RF characteristics (such as error vector magnitude, spectrum emissions, and receiver sensitivity) remain within limits across the full resource grid. It also informs scheduler design in the eNodeB, which must map logical channel resources to physical RBs within the aggregated configuration.
Introduced in Rel-10 with the advent of LTE carrier aggregation, the term has remained stable through Rel-11, Rel-12, Rel-13, and Rel-14, as well as in Rel-17, Rel-18, Rel-19, and Rel-20 where the LTE specifications continue to be maintained. The definition text has not changed, reflecting the maturity of the LTE physical layer and the fact that the fundamental relationship between aggregated channel bandwidth and resource block allocation has not required revision. The term remains relevant in modern networks because LTE carrier aggregation is still widely deployed, and the concept also informs the analogous NR definitions used in 5G.
For engineers, the aggregated transmission bandwidth configuration is a practical parameter in link budgeting, scheduler configuration, and conformance testing. It determines the maximum throughput achievable in an aggregated bandwidth, influences the design of RF front-ends that must handle the full resource grid, and is a key input to coexistence and interference analysis. Understanding the distinction between the MHz-based channel bandwidth and the RB-based transmission bandwidth configuration is essential for anyone working with carrier aggregation in LTE or NR.
Purpose & Motivation
The Aggregated Transmission Bandwidth Configuration exists to bridge the gap between RF spectrum definitions and baseband resource allocation in carrier aggregation. When LTE carrier aggregation was introduced in Rel-10, it became necessary to define not only the RF span of aggregated carriers (the aggregated channel bandwidth in MHz) but also the number of physical resource blocks that could actually be scheduled within that span. Without this definition, there would be no consistent way to specify the maximum RB allocation for conformance testing, scheduler design, or throughput calculations.
The concept solves the problem of ambiguity in resource mapping when multiple component carriers are aggregated. Each component carrier has its own transmission bandwidth configuration, and the aggregated configuration must account for guard bands between carriers and at the edges of the aggregated span. By defining the aggregated transmission bandwidth configuration in RBs, 3GPP provides a precise, testable parameter that ensures UEs and base stations can interoperate correctly across the full aggregated resource grid.
Historically, the term builds on the single-carrier transmission bandwidth configuration defined in the original LTE specifications. The Rel-10 extension to aggregated carriers was motivated by the need to support wider bandwidths than the 20 MHz maximum of a single LTE carrier, enabling higher peak data rates. The stable definition across subsequent releases reflects the maturity of LTE and the fact that the fundamental RB structure has not changed. The concept also served as a foundation for the analogous NR definitions, demonstrating its lasting influence on 5G physical-layer design.
What changed in its specifications
The latest release-to-release comparison of specifications that define Aggregated Transmission Bandwidth Configuration. Each summary describes the whole specification, not only this term.
Rel-13 added carrier aggregation requirements, 4Rx antenna port tests, MTC coverage enhancements, LAA test parameters, FD-MIMO procedures, and downlink interference mitigation requirements.
Full comparison in TS 36.101 →Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Initial introduction with LTE carrier aggregation. The aggregated transmission bandwidth configuration was defined as the number of resource blocks allocated within the aggregated channel bandwidth, establishing the physical-layer resource mapping framework for multi-carrier operation.
Defining Specifications
3GPP specifications that define or reference Aggregated Transmission Bandwidth Configuration, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 36.101 vk10 | E-UTRA UE RF Requirements | Rel-20 read |
| TS 36.521 vj11 | E-UTRA UE Conformance Testing for Satellite Access | Rel-19 read |
| TS 36.899 | 3GPP TR 36.899 | Rel-10 read |