Description
The Extended Dual slot Access Burst (EDAB) is a physical layer burst structure defined in GSM specifications for the Random Access Channel (RACH). It is an enhancement over the standard Access Burst (AB), which occupies a single time slot. The EDAB, as the name implies, extends the transmission over two consecutive time slots within a TDMA frame. This is achieved by the Mobile Station (MS) transmitting a specially formatted burst that spans these two slots. The burst structure includes an extended training sequence and guard periods tailored for the dual-slot duration, as detailed in specs like 45.001 and 45.003.
Operationally, when a GSM cell is configured to support EDAB (indicated via broadcast system information), an MS attempting network access—for example, to perform a location update or initiate a call—may use this burst format if it estimates poor radio conditions. The MS calculates its required transmission power and timing advance. If the path loss is very high, exceeding a threshold where a standard AB might not be reliably decoded by the Base Transceiver Station (BTS), the MS can opt to send an EDAB. The use of two slots provides approximately twice the energy for the same peak power, or allows for a more robust modulation pattern, thereby increasing the signal-to-noise ratio at the receiver.
Architecturally, the EDAB impacts both the MS and the BTS. The MS's physical layer must be capable of generating this longer burst format, including the appropriate modulation and power ramping across two slots. The BTS receiver must be equipped to detect and synchronize to these extended bursts on the RACH. The decoding algorithms in the BTS are designed to correlate the longer training sequence, which provides improved resistance to multipath fading and interference. The successful detection of an EDAB grants the MS access to the network, after which it proceeds with standard signaling procedures. EDAB's primary role is to extend the effective coverage radius of a GSM cell, particularly for control plane signaling, ensuring that users at the cell edge or in difficult propagation environments can still attach to the network and request services.
Purpose & Motivation
The Extended Dual slot Access Burst was developed to solve the critical problem of random access failure in large-cell GSM deployments and in environments with severe signal attenuation. Prior to EDAB, the standard Access Burst had a limited link budget. In very large cells (e.g., rural areas) or in deep indoor locations (e.g., basements), the signal from an MS might arrive at the BTS too weak to be detected reliably over the noise and interference on the RACH. This resulted in failed access attempts, repeated retries, increased interference, and ultimately, service denial for users in poor coverage areas.
Introduced in Release 14 as part of GSM evolution for IoT and coverage extension, EDAB was motivated by the need to support Machine-Type Communication (MTC) devices, which are often deployed in challenging radio conditions and require extremely reliable network attachment. The traditional approach to improve coverage was to increase BTS transmit power or deploy more sites, which is costly. EDAB provided a cost-effective solution by enhancing the uplink access signal from the device side, effectively increasing the uplink budget for the initial access procedure without requiring hardware changes at every BTS (only those needing the feature).
It addresses the fundamental asymmetry in cellular link budgets where the downlink (BTS to MS) is typically stronger than the uplink (MS to BTS). By dedicating more time (two slots) to the access attempt, the MS can integrate more energy into the signal, making it more likely to surpass the BTS's detection threshold. This was particularly important for ensuring the success of infrequent but critical signaling events like periodic location updates from IoT sensors. EDAB thus extends the practical coverage of a GSM cell for control signaling, improving accessibility and reliability, which is a key requirement for massive IoT deployments and robust commercial voice services.
Key Features
- Spans two consecutive TDMA time slots for increased transmission duration
- Enhances uplink link budget for the random access procedure
- Uses an extended training sequence for improved synchronization in noise
- Configurable by the network via broadcast system information
- Used by the MS based on estimated path loss conditions
- Improves access success rate in large cells and poor coverage scenarios
Evolution Across Releases
Initial standardization of the Extended Dual slot Access Burst. Defined the new burst format, its structure, and the associated procedures in specifications such as 45.001, 45.002, and 45.005. Introduced to significantly improve random access performance for coverage-limited devices, particularly targeting GSM-based IoT deployments.
Refinements and integration with other GSM evolution features for IoT. Potential updates to testing specifications (e.g., 51.021) to include conformance tests for MS supporting EDAB, ensuring interoperability and performance compliance.
Enhancements possibly related to power efficiency for IoT devices using EDAB. Specifications may have been updated to define scenarios for its use more precisely, minimizing unnecessary energy consumption while maximizing access reliability.
Defining Specifications
| Specification | Title |
|---|---|
| TS 43.064 | 3GPP TR 43.064 |
| TS 44.018 | 3GPP TR 44.018 |
| TS 45.001 | 3GPP TR 45.001 |
| TS 45.002 | 3GPP TR 45.002 |
| TS 45.003 | 3GPP TR 45.003 |
| TS 45.005 | 3GPP TR 45.005 |
| TS 51.021 | 3GPP TR 51.021 |